Pagina 2
WARNING
To reduce the risk of fire, electrical shock, or injury when
using your Wine/Beverage Cooler, follow these basic
precautions:
•Read all instructions before using the Wine/Beverage Cooler.
•DANGER or WARNING: Risk of child entrapment.
•Child entrapment and suffocation are not problems of the past. Junked or abandoned appliances are still
dangerous . . . even if they will “just sit in the garage a few days”.
•Before you throw away your old Wine/Beverage Cooler: take off the doors. Leave the shelves in place
so that children may not easily climb inside.
•Never allow children to operate, play with, or crawl inside the Wine/Beverage Cooler.
•Never clean Wine/Beverage Cooler parts with flammable fluids. The fumes can create a fire hazard or
explosion.
•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other
appliance. The fumes can create a fire hazard or explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Wine/Beverage Cooler
•Remove the exterior and interior packing.
•Check to be sure you have all of the following parts:
•6 Shelves
•1 Bottle/Can Basket
•1 Instruction Manual
•Before connecting the Wine/Beverage Cooler to the power source, let it stand upright for approximately 2 hours. This
will reduce the possibility of a malfunction in the cooling system from handling during transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
Installation of Your Wine/Beverage Cooler
•This appliance is designed to be freestanding only, and should not be recessed or built-in (fully recessed).
•Place your Wine/Beverage Cooler on a floor that is strong enough to support it when it is fully loaded. To level your
Wine/Beverage Cooler, adjust the adjustable leg at the bottom of the unit.
•Allow 5 inches of space between the back and sides of the unit, which allows the proper air circulation to cool the
compressor.
•Locate the Wine/Beverage Cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.). Direct
sunlight may affect the acrylic coating and heat sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the unit not to perform properly.
•Avoid locating the unit in moist areas.
•Plug the Wine/Beverage Cooler into an exclusive, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician or an authorized Avanti Products service center.
•After plugging the appliance into a wall outlet, allow the unit to cool down for 2-3 hours before placing items in the
compartment.
