7. Operation
Turn on
button to start the chimney. For models with touch
button, once you connect the power cord, entire light
glows and default time appears on timer screen and
selected speed control to start the chimne
Standby mode*
On connecting power supply, all button indicators
selected for 1 minute, Chimney enters into standby
mode. The digital display screen shows the default
If user wants to extend/decrease the timer (-)*
set, countdown timer starts running after 3 secs. If
Speed control
Press respective speed buttons (Chapati/Idli; Pan Fry/
corresponding speed. On selection of speed, respec-
tive speed button light glows. Press the current speed
Light control
Power back up Lamp*
Pest control*
Chimney is equipped with pest control which starts
running on powering on the chimney. It doesn’t run
under battery supply.
Filter clean indicator*
Filter cleaning indicator starts glowing indicating for
press the Clean button to reset the indicator
8. Maintenance
Regular maintenance and cleaning will ensure long life
and great performance of the kitchen hood.
the hood once or
frequently
utensils
Cleaning of hood
• Unplug the electric supply when cleaning the hood
• Use damp cloth and mild liquid household cleaner
damage exterior paint
stainless steel surfaces
ness of the chimney
• Helps extend the life of the motor
damage exterior
stainless steel surfaces
Warning:
Wear rubber gloves while cleaning to prevent any
8
9. Safety Precaution for battery*
1. When using the battery
1) Misusing the battery may cause it to get hot,
sure to follow the safety rules listed below:
•
•
•
polarity is reversed
•
terminal of the battery to each other with any metal
•
•
with a hammer, step on the battery, or otherwise
•
•
allow the battery to get wet
•
battery contains safety and protection devices
which, if damaged, may cause the battery to generate
heat, rupture or ignite
battery in direct sunshine, or use or store the
cause the battery to generate heat, rupture, or
ignite. Using the battery in this manner may also
result in a loss of performance and a shortened
life expectancy
3) If the device is to be used by small children, the
caregiver should explain the contents of the user’s
manual to the children. The caregiver should
provide adequate supervision to ensure that the
device is being used as explained in the user’s
manual
4) When the battery is worn out, insulate the terminals
with adhesive tape or similar materials before
disposal
5) Immediately discontinue use of the battery if, while
using, charging, or storing the battery, the battery
emits an unusual smell, feels hot, changes color,
changes shape, or appears abnormal in any other
way. Contact your sales location or Philips if any of
these problems are observed
high-pressure containers, or on induction cookware
into one’s eye, do not rub the eye. Rinse well with
water and immediately seek medical care. If left
the eye
can destroy the safety features of the battery by
damaging the safety vent inside the cap. Permanent
connections to an energy cell may be made by spot
welding solder tags to the terminals. A soldered
connection can subsequently be made to the tag
9) Inserting the batteries with their polarities reversed
negative poles reversed as this can cause
permanent damage to the battery which may swell
or rupture
compartment) - Always avoid designing airtight
battery compartments. In some cases, gases
danger of the batteries exploding or rupturing in
the presence of a source of ignition (sparks
generated by a motor switch, etc.)
battery in an appliance or purpose for which it was
damage the battery or appliance
required to prevent short circuiting any battery
since the consequences can be very dangerous.
Care must be taken during the design of the battery
shape to ensure batteries cannot be inserted in
reverse. Also, caution must be taken to prevent
accidental short-circuiting of the battery
13)Using old and new batteries together - Avoid using
old and new batteries together. Also avoid mixing
Lithium metal batteries or with another
characteristic values, etc., can cause damage to the
batteries or the product
14) Storage - Store the batteries in a cool place and
when in use don’t allow them to remain in
(e.g. direct sunlight in a locked car)
batteries into plastic bags designed to protect
components from electrostatic discharge. These
bags are made from conductive material which
could cause the battery to be short circuited
16) Other Precautions - Batteries should always be
charged prior to use. Be sure to charge correctly
When disposing the battery
• When the battery is worn out, insulate the
terminals with adhesive tape or similar materials
before disposal
•
inside may be toxic and may damage skin
and clothes
9
Chappati/Idli
On pressing “Chapati/Idli” button for 3 seconds
(buzzer rings once) and display screen shows “3:00”
then. If there’s no further action on buttons within 3
minutes. During count down time, “Chapati/Idli” will
