PRAGMATIC COMMUNICATIONS SYSTEMS CATS-KP Manuel utilisateur

Pragmatic Communications Systems, Inc.

2934 Corvin Drive, Santa Clara CA 95051

Tel. (408) 735 0300 Fax (408) 735 0800

[email protected]

CATS-KP

SMART WALL KEYPAD

User’s Manual

The software and documentation contain information that is protected by copyright. No part of the software or the documentation may be

reproduced, photocopied, translated, stored on a retrieval system, or transmitted, in whole or in part, without the express written consent.

Microsoft is a registered trademark of Microsoft Corp. Windows is a trademark of Microsoft Corp.

CATS™ is a registered trademark of Pragmatic Communication Systems, Inc.

CATS-KP

User’s Manual

Document Number: 30521

First Edition: Sep 2002

Preface •iii

CATS-KP

Preface

Congratulations on purchasing CATS-KP smart wall keypad!

This booklet is part of your documentation set. It includes information on

•installation of the keypad

•configuration of the CATS network

•using the keypad

How to use this manual 1. Begin with the introductory chapter and continue reading through the instructions for the

installation of the keypad

2.Refer to the CATS™ User’s Manuals for more information about the CATS™ Network.

What is CATS-KP™?

CATS-KP™ is a microcontroller-based graphics LCD wall keypad designed to integrate different

aspects of today’s modern houses –multi source/multi room audio/video distribution, lighting

and climate control as well as some other features of smart homes.

Technical Support

Technical support is available to all customers via:

•E-mail: sales@wireless-experts.com

•WEB: www.wireless-experts.com

•Mail: Pragmatic Communications Systems, Inc.

2934 Corvin Drive, Santa Clara CA 95051

USA

Before contacting us, be sure to have available:

•the version number of your CATS-KP™ keypad firmware

•the model name and number(s) of your supported automation devices

•the serial number of relevant CATS™ units (if applicable)

•a return phone, fax, or e-mail address

Table of Contents •v

CATS-KP

Table of Contents

Technical Support..........................................................................................................................................iii

INSTALLATION ____________________________________________________________ 9

Installation steps..............................................................................................................................................9

Step 1—CAT5 cable........................................................................................................................................9

Step 2—connecting the CATS™ units..........................................................................................................10

Step 3—connecting the CATS-KP™ keypads...............................................................................................11

THE CATS™ NETWORK CONFIGURATION _______________________________________ 13

Prerequisites .................................................................................................................................................13

Configuration steps .......................................................................................................................................13

Step 4—Configuring the CATS™ unit address.............................................................................................13

Step 5—Configuring the CATS-KP™ keypad................................................................................................13

Step 6—Configuring source labels (optional)................................................................................................13

Step 7—Configuring scene labels.................................................................................................................14

What’s Next…?.............................................................................................................................................14

MENU STRUCTURE ________________________________________________________ 15

Menu structure ..............................................................................................................................................15

MENU ITEMS ____________________________________________________________ 19

Root...............................................................................................................................................................19

Source selection............................................................................................................................................20

Lighting scenes .............................................................................................................................................21

Transport Menu.............................................................................................................................................21

Utilities Menu.................................................................................................................................................22

Tone adjustment ...........................................................................................................................................22

Balance adjustment.......................................................................................................................................22

Contrast adjustment......................................................................................................................................22

CATS™ Setup...............................................................................................................................................24

Transmitters Setup........................................................................................................................................24

Target Setup..................................................................................................................................................25

Router Setup.................................................................................................................................................25

Keypad address setup...................................................................................................................................26

Keypad Setup................................................................................................................................................27

vi •Table of Contents

Clock/Calendar Setup...................................................................................................................................27

Lighting scenes configuration........................................................................................................................27

Labels Setup.................................................................................................................................................29

Source Labels Setup.....................................................................................................................................29

Scene Labels Setup......................................................................................................................................29

IR REMOTE CONTROL______________________________________________________ 31

TECHNICAL SPECIFICATION __________________________________________________ 33

APPENDIX I. NETWORK EXAMPLE______________________________________________ 35

NOTES_________________________________________________________________ 37

Table of Figures •7

CATS-KP

Table of Figures

Figure 1: Wiring plans...............................................................................................................10

Figure 2: CATS™ connectors...................................................................................................10

Figure 3: Keypad connectors....................................................................................................11

Figure 4: Menu structure #1......................................................................................................15

Figure 5: Menu structure #2......................................................................................................16

Figure 6: Menu structure #3......................................................................................................17

Figure 7: Root screens .............................................................................................................19

Figure 8: Root functionality.......................................................................................................19

Figure 9: Source selection screen.............................................................................................20

Figure 10: Return to root sign....................................................................................................20

Figure 11: Lighting scenes screen.............................................................................................21

Figure 12: Transport menu (CATS Media Server (CMS) ™).....................................................21

Figure 13: Utilities Menu............................................................................................................22

Figure 14: CATS™ Setup Menu................................................................................................24

Figure 15: Keypad Setup Menu.................................................................................................27

Figure 16: Labels menu.............................................................................................................29

Figure 17: Characters available for labels.................................................................................29

Figure 18: CATS™ IR Remote Control .....................................................................................31

Installation •9

CATS-KP

Installation

The keypad has been designed to be installed in a double size J-box, such as Carlon 32.0 cu.in.

IMPORTANT: For normal operation the CATS™ units have to be v2.3 or higher.

Installation steps

1.Installing CAT5 cables and RJ-45 plugs.

2.Connecting CATS™ units to the network.

3.Connecting CATS-KP™ keypads to the network.

4.Connecting TW523 (TW7223) Power Line Interface (optional)

5.Configuring installed keypads.

Step 1—CAT5 cable

Short for Category 5, network cabling that consists of four twisted pairs of copper wire

terminated by RJ45 connectors.

Cat-5 cabling supports frequencies of up to 100 MHz and speeds of up to 1000 Mbps. It can be

used for ATM, token ring, 1000Base-T, 100Base-T, 10Base-T and/or audio/video networking.

Computers hooked up to LAN s are connected using Cat-5 cables, so if you're on a LAN the

cable running out of the back of your PC is, most likely, Category 5.

Cat-5 is based on the EIA/TIA 568 Commercial Building Telecommunications Wiring

Standard developed by the Electronics Industries Association as requested by the Computer

Communications Industry Association in 1985.

CAT5 provide an ideal inexpensive medium for a digital home as the same type of cable can be

used for the whole house network.

1. Wiring plans

There are two standard RJ-45 wiring plans:

10 •Installation

Figure 1: Wiring plans

We recommend using plan T-568B.

Before connecting units we recommend to test the integrity of the cables and the connectors

using a cable analyzer (such as AtlasIT). Loose or broken wires may stop the network

functioning.

Step 2—connecting the CATS™ units

To ensure normal operation the CATS™ units must be connected to CAT5 cables according to

the house wiring diagram. Please refer to the CATS™ User’s Manual for more information.

1.CATS™ RJ-45 pin-out

The following wires are used in CATS™ network:

•1, 2 –RS485 (A) and RS485 (B) NOTE: USE DB-9 pins 2 & 3 for new designs

•3, 4, 5, 6 –Audio/Video and infrared IR traffic

•7, 8 –grounded.

The new generation of CATS™ units (firmware 2.3) does not use RJ45 pins for RS485

signaling. The DB9 socket is used instead. Please check the integrity of the RS485 network

before using it.

Figure 2: CATS™ connectors

Split CAT5 cable for the new

generation of units as follows:

•RJ45 pin 1 –DB9 pin 2

•RJ45 pin 2 –DB9 pin 3

Table des matières

Manuels Clavier populaires d'autres marques

BFT

BFT SELETTO Manuel utilisateur

Micro Id

Micro Id MP7G3BL Manuel d'instructions

WindowMaster

WindowMaster WLI 130 Manuel utilisateur

ACT

ACT ACT PRO 1030 Manuel utilisateur

Cardin

Cardin SSB Series Manuel utilisateur

Harman Kardon

Harman Kardon KP 1 Manuel utilisateur

Chamberlain

Chamberlain KPR2000 Guide de l'utilisateur

CYP

CYP CR-KP1 Manuel utilisateur

Aeware

Aeware k-35 Series Guide de référence

Aritech

Aritech CS-175 Series Manuel utilisateur

GE NetworX NX-1600E Series Manuel utilisateur

Lenze AC Tech

Lenze AC Tech MC SERIES Manuel utilisateur

Burg Wächter

Burg Wächter secuENTRY 7711 Manuel utilisateur

Aeware

Aeware in.k450 Manuel utilisateur

Lenze

Lenze EPM-H410 Manuel utilisateur

Toshiba

Toshiba RKP007Z Manuel utilisateur

Gemini

Gemini GEM-DXK1 KEYPAD Manuel utilisateur

Russound

Russound MDK-C5 Manuel d'utilisation