PowerVision S1 Manuel utilisateur
PowerVision S1
User Manual
PowerVision
V1.0
.
Reading suggestion........................................................................................................................1
Symbol description...........................................................................................................................1
Usage recommendations.................................................................................................................1
Watch Tutorial Video......................................................................................................................1
Product description........................................................................................................................2
About PowerVision S1......................................................................................................................2
Buttons and port functions..............................................................................................................4
Unfolding and storage......................................................................................................................7
Charging...........................................................................................................................................12
Phone installation and balance adjustment................................................................................12
Preparing for use.............................................................................................................................15
Connecting PowerVision S1................................................
..
.........................................................16
Activating PowerVision S1.......................................................................................................
.
......16
Using the gimbal............................................................................................................................ 17
Operating modes ...........................................................................................................................
.
17
Shooting with Vision+S1.................................................................................................................18
Using PowerFollow mode...............................................................................................................20
Charging your phone with S1...............................................................................................22
Charging your phone wirelessly.....................................................................................................22
Functions as a wireless charger for phones.................................................................................22
Charging your phone with a wired charger..................................................................................23
Firmware upgrade.........................................................................................................................24
Specications....................................................................................................................................25
Contents
PowerVision S1 provides users the following information:
1."Tutorial Video"
2."Disclaimer and Safety Guidelines"
3."Quick Start Guide"
4."User Manual"
We recommend that users watch the tutorial video for this product on the of-
cial PowerVision website https://www.powervision.me or Vision+S1 App before
using this product.
To learn more about how to use this product, read the "Disclaimer and Safety
Guidelines " and "Quick Start Guide".
For detailed product operating instructions, read this user manual.
Download Vision+S1 App in your phone's App store. Search for Vision+S1 App
or scan the following QR code with your phone:
To ensure optimal performance of Vision+S1 App, make sure that your device is
using iOS version 10.0 or Android version 7.0 or higher.
App tutorial video location:
Ofcial website tutorial video location:
https://www.powervision.me/app/3.0/powervisions1.html
Precautions
Reading suggestion
Symbol description
Usage recommendations
Watch Tutorial Video
Vision+ S1
1
PowerVision S1 combines a three-axis stabilized handheld gimbal, smart stand,
and wired and wireless charging in a single device. Its clever and compact folding
design is elegant and easy to carry, making it the perfect companion for smart-
phones.
PowerVision S1 integrates three-axis gimbal with high precision, which features
physical stabilization that helps phones capture smoother and less-shaky motion pic-
tures.The device folds into a small size that's convenient to carry and easy to
store.Users can also use S1 to fast charge their phones with a wired or wireless char-
ger any time and anywhere.
Use Bluetooth to connect to Vision+S1 App and control your phone using the
gimbal's buttons. Shooting in special effect modes such as Panorama, Motionlapse,
and Slowmotion is supported.
PowerVision S1 is the rst product of its kind to feature a PowerFollow function.
PowerFollow enables the gimbal to automatically follow your movement during lives-
treaming, improving the quality of indoor and outdoor shooting of motion scenarios.
Product description
About PowerVision S1
• PowerVision S1 part names
1.Motor Cover
2.Wireless Charging Output
3.5-Way Button
4.Camera Button
5.Power Button
6.Zoom Slider
7.System Status Indicator
Battery Level Indicator
8.USB-C Port
9.Built-in Tripod
10.1/4"-20 UNC Port
1
2
7
6
3
4
5
8
10 9
11
17
13
16 15
12
14
2
11.Pan Motor
12.Tilt Motor
13.Roll Motor
14.Main Arm
15.Tilt Joint
16.Roll Joint
17.Magnetic Mounting Plate
• Magnetic Phone Clamp
• Magnetic Phone Case (sold separately)
1.Magnetic Mounting Plate
2.Slide Stand
• Magnetic Universal Phone Mount (sold separately)
1.Magnetic Universal Phone Mount (sold separately)
2.Slide Stand
1
2
1
2
3
OFF mode
• Press once: View battery level and activate charger mode.
• Press and hold: Turn on.
ON mode
• Press once: Open the shortcut menu, and press again to return to camera
mode.
• Press twice: Toggle between portrait and landscape mode.
• Press three times: Enter playback mode, and press again to return to camera
mode.
• Press and hold: Power off.
Standby mode
• Press once: Wake up device.
ON mode
• Press once: Photo or video.
• Press and hold: Burst shooting when in photo mode.
Standby mode
• Press once: Wake up device.
By default, PowerVision S1 is in Follow mode when it is powered on.In Follow
mode, the gimbal will keep the phone level at all times during shooting.When the
gimbal is moved up, down, left, or right, the shooting direction will be adjusted
smoothly.
Use the following buttons and ports to access PowerVision S1's functions:
Buttons and port functions
◆Power Button
◆Camera Button
◆System Status Indicator
4
Blinking blue light
Blinking red light Gimbal exception
(too high or too low temperature, excessive battery discharge etc.)
Blinking pattern
Solid yellow light
Solid green light
Yellow and green pulses blink
Solid orange light
Indicator status
Bluetooth not connected
Bluetooth connected
Standby mode
Phone charger mode
Gimbal is updating
Indicates the current system status
Operating status:
Charging mode:
◆ Battery Level Indicator
Current battery level LED1 LED2 LED3 LED4
0%~13%
13%~25%
25%~38%
38%~50%
50%~63%
63%~75%
75%~88%
88%~100%
Battery level LED1 LED2 LED3 LED4
Fully charged
5
0%-50%
80%-100%
50%-80%
Camera mode:
Up, down, left, and right buttons: move the gimbal in four directions
Middle button:
• Press once to enable Tracking mode. Press once again to disable Tracking
mode.
• Press twice to re-center the gimbal.
• Press three times to switch between front and rear cameras.
• Press and hold rmly to enter Lock mode.
• Press once and then hold rmly to enter Sport mode. Release to turn off Sport
mode.
Standby mode:
• Press once to wake up device.
◆ 5-Way Button
Camera mode: Slide up or down to control the camera zoom.
• Press once to increase/decrease the camera zoom factor.
• Press to continuously increase/decrease the camera zoom factor.
◆ Zoom Slider
Charging port
• Use this port to connect to the USB charger, and charge PowerVision S1 .
Power supply port
• Use this port to connect and charge your phone.
◆ USB-C Port
6
PowerVision S1 features a built-in tripod. Extend and unfold the tripod to place
it on a stable table.
Open the [Motor cover], and rotate the [Main arm] 180 degrees vertically until
level with the device.
◆ Built-in Tripod
Use the 1/4"-20 UNC Port located at the base to connect the gimbal to an exter-
nal tripod.
◆ 1/4"-20 UNC Port
PowerVision S1 was designed to be extremely portable. The device can be
folded into a small size, making it easy to store and transport, and can also be used
to charge phones.
Unfolding and storage
：Gesture control switch
There are three types of gesture controls when this switch is enabled.
：Enable or disable Follow
：Take a photo
：Start or stop video recording
3. Settings
：Gimbal settings
a.Follow Mode
1）.Follow: The roll axis is locked, and the tilt axis and the yaw axis follow the move-
ments of the device.
2）.Tilt Locked: The roll axis and the tilt axis are locked, and the yaw axis follows the
movements of the device.
3）.FPV: The roll, tilt, and yaw axes all follow the movements of the device.
b.Sport Mode Switch: Enables and disables sport mode. When this switch is enabled,
◆ Unfolding
Do not turn on S1 when it is in storage. Please install the phone onto the
gimbal before turning it on and using the device.
the follow speed increases.
c.Zoom Speed: Controls the zoom speed of the zoom slider.
d.Handle Speed: Adjust the control speed of 5-Way button
e.Horizontal Reverse Switch: When this switch is enabled, if you push the handle left
or right, the gimbal's yaw axis will move in the opposite direction of your actual
movements.
f.Vertical Reverse Switch: When this switch is enabled, if you push the handle up or
down, the gimbal's tilt axis will move in the opposite direction of your actual move-
ments.
g.Gimbal Auto Calibration: When the gimbal encounters unexpected horizontal
skewing or drifting, this function automatically recalibrates the gimbal.
h.Gimbal Fine-tuning: This function allows the gimbal's horizontal level to be
ne-tuned.
：General Settings
Manage current connection settings and view setting names, rmware version, and
device serial number, etc.
4、Exposure Parameters
：Real-time display of the current shutter speed, ISO and EV values.
5、Zoom
：Shows the current zoom ratio.Use the zoom function to zoom in
or out.
6、Shooting Mode
Swipe to choose different shooting modes
Timewrap: The phone shoots a time-lapse while in motion.
Timelapse: Includes normal time-lapse and Motionlapse.A normal time-lapse requires
setting the time interval and length of time. For Motionlapse, you can also set up to 4
gimbal positions.
Slowmotion: Chooses a frame rate to shoot in slow motion.
Video: Shoots regular video.
Photo: Takes photos.
Panorama: Uses the gimbal to automatically shoot a panoramic photo. Supports 3*3,
240°, and clone modes.
7、Media Library
：View local media library resources.
8、Exposure Parameter Settings
：Adjust exposure parameters.
9、Camera Button
：Press to start or stop shooting.
10、Shortcut Function Menu
：Different shooting modes have different parameter. Visit the App shooting
page for more details.
11、Front/Rear Camera Switch
：Press to switch between the front and rear cameras
12、Tracking Mode
：Tracking mode helps you to keep your target in the center position in the
frame while photographing or recording.Tracking mode can be enabled using three
methods:
a. Short press the 5-Way button and PowerVision S1 will automatically start tracking
the object in the center of the frame. Press the 5-Way button again to deactivate
object tracking.
b. Manually draw a box on the screen to choose an object to be tracked. Press the
tracking icon to deactivate object tracking.
c. Enable gesture recognition in the status bar of the shooting page. Show the
camera lens with the "Five" gesture and the system will automatically recognize the
object and start tracking it. To deactivate object tracking, make the same gestures to-
wards the camera lens.
13、Focus Frame
：Focus frame
14、Gimbal Battery Level
：Shows the gimbal's current battery level.
15、Gimbal Mode
：Shows the current gimbal mode.
Note: Camera setting functions may differ depending upon the phone model you are
using. Actual supported functions may vary.
7
180°
Rotate the [Roll joint] to the illustrated position.
Hold the main arm and rotate the [Tilt joint] counterclockwise to the illustrated
position.
Use a ①magnetic phone clamp, ②magnetic phone case, or ③magnetic univer-
sal phone mount to install your phone into the gimbal and start using it.
：Gesture control switch
There are three types of gesture controls when this switch is enabled.
：Enable or disable Follow
：Take a photo
：Start or stop video recording
3. Settings
：Gimbal settings
a.Follow Mode
1）.Follow: The roll axis is locked, and the tilt axis and the yaw axis follow the move-
ments of the device.
2）.Tilt Locked: The roll axis and the tilt axis are locked, and the yaw axis follows the
movements of the device.
3）.FPV: The roll, tilt, and yaw axes all follow the movements of the device.
b.Sport Mode Switch: Enables and disables sport mode. When this switch is enabled,
12
3
the follow speed increases.
c.Zoom Speed: Controls the zoom speed of the zoom slider.
d.Handle Speed: Adjust the control speed of 5-Way button
e.Horizontal Reverse Switch: When this switch is enabled, if you push the handle left
or right, the gimbal's yaw axis will move in the opposite direction of your actual
movements.
f.Vertical Reverse Switch: When this switch is enabled, if you push the handle up or
down, the gimbal's tilt axis will move in the opposite direction of your actual move-
ments.
g.Gimbal Auto Calibration: When the gimbal encounters unexpected horizontal
skewing or drifting, this function automatically recalibrates the gimbal.
h.Gimbal Fine-tuning: This function allows the gimbal's horizontal level to be
ne-tuned.
：General Settings
Manage current connection settings and view setting names, rmware version, and
device serial number, etc.
4、Exposure Parameters
：Real-time display of the current shutter speed, ISO and EV values.
5、Zoom
：Shows the current zoom ratio.Use the zoom function to zoom in
or out.
6、Shooting Mode
Swipe to choose different shooting modes
Timewrap: The phone shoots a time-lapse while in motion.
Timelapse: Includes normal time-lapse and Motionlapse.A normal time-lapse requires
setting the time interval and length of time. For Motionlapse, you can also set up to 4
gimbal positions.
Slowmotion: Chooses a frame rate to shoot in slow motion.
Video: Shoots regular video.
Photo: Takes photos.
Panorama: Uses the gimbal to automatically shoot a panoramic photo. Supports 3*3,
240°, and clone modes.
7、Media Library
：View local media library resources.
8、Exposure Parameter Settings
：Adjust exposure parameters.
9、Camera Button
：Press to start or stop shooting.
10、Shortcut Function Menu
：Different shooting modes have different parameter. Visit the App shooting
page for more details.
11、Front/Rear Camera Switch
：Press to switch between the front and rear cameras
12、Tracking Mode
：Tracking mode helps you to keep your target in the center position in the
frame while photographing or recording.Tracking mode can be enabled using three
methods:
a. Short press the 5-Way button and PowerVision S1 will automatically start tracking
the object in the center of the frame. Press the 5-Way button again to deactivate
object tracking.
b. Manually draw a box on the screen to choose an object to be tracked. Press the
tracking icon to deactivate object tracking.
c. Enable gesture recognition in the status bar of the shooting page. Show the
camera lens with the "Five" gesture and the system will automatically recognize the
object and start tracking it. To deactivate object tracking, make the same gestures to-
wards the camera lens.
13、Focus Frame
：Focus frame
14、Gimbal Battery Level
：Shows the gimbal's current battery level.
15、Gimbal Mode
：Shows the current gimbal mode.
Note: Camera setting functions may differ depending upon the phone model you are
using. Actual supported functions may vary.
8
Table des matières
