POSIFLEX DS-200 Manuel utilisateur
DS-200 / DS-210
Dock Station
User Manual
DS-200
DS-210
Package Contents
DS-200 unit (x 1)
12V/60W power adaptor (x 1)
Desktop mounting kit pack x 1
(including 2 fixing screws, 2
plastic anchors, and 1 desktop
mounting bracket)
User manual (x 1)
Package Contents
DS-210 unit (x1)
12V/100W power adaptor +
power cord (x 1)
Thermal paper roll of 80 mm
width (x 1)
Spacer plate for thermal paper
roll of 58mm width (x 1)
Desktop mounting kit pack x 1
(including 2 fixing screws, 2
plastic anchors, and 1 desktop
mounting bracket)
User manual (x 1)
Product Features
Multiple I/O ports
Wi-Fi printer (802.11b/g/n 2.4GHz) (for DS-210 only)
Charger for MT-4008W tablet PC
12530901010 Ver. Original
http://www.posiflex.com
1
Views of the DS-200/DS-210
Front View
Power LED Indicator
Power Button
Error LED Indicator
Paper-out LED Indicator
Printer Wi-Fi Indicator
Feed Button
Paper Roll Exit
※Error LED Indicator, Paper-out LED Indicator, Printer Wi-Fi Indicator,
and Feed Button are provided for DS-210 only.
Rear View
Pistol Grip (PG-200) Holder
Bottom I/O Cover
Cable Exit
2
Top View
Guiding Wedge Guiding Wedge
Tablet (MT-4008W) Connector
Bottom View
Cushion Cushion
Right Side View
Paper Roll Cover Release Lever
3
View of I/O Interface of DS-200/210
12345
1 12VDC-IN Power Jack 2 RJ11 Cash Drawer Port
3 RJ45 LAN Port 4 DB-9 Port
5 USB 2.0 Port
Loading a Paper Roll
1. Press down the paper roll cover release lever to
release the paper roll cover.
2. The paper roll cover ejects. Then, open the paper
roll cover manually.
3. Drop the 80mm-wide thermal paper roll inside
the paper roll compartment of the printer, as
shown in the right figure.
Press
4
4. Drag the paper roll to the portion where the
paper cutter is installed.
5. Close the paper roll cover and make the tail of
the paper roll come out of the track between the
paper roll cover and the front cover.
6. Determine that the paper roll is completely
loaded in the paper roll compartment of the
printer and the paper roll is dragged out of the
track between the paper roll cover and the front
cover.
Paper Cutter
Placing the MT-4008W on the Dock Station
1. Align the two dock station locking holes on the MT-4008W tablet PC with
the two guiding wedges on the dock station. The tablet PC connector on
the dock station is then fully connected to the dock station connector on
the tablet PC.
5
2. Hold the portion A and press the MT-4008W
tablet PC to connect firmly to the dock station.
A
3. Determine that the tablet PC is completely placed on the dock station.
Connecting Power Adapter and I/O Cables
Follow the steps listed below to open the bottom I/O cover and connect cables.
1. Press the portion A with thumb.
2. Lever the protective cover in the direction
indicated by the arrow in the right figure.
A
6
3. Remove the protective cover.
4. Connect power adapter and I/O cables to the
I/O port of the dock station.
5. Make the protective cover join to the wedge
portions of the rear cover of the dock
station.
6. Determine that the protective cover is well
wedged to the wedge portions of the rear
cover of the dock station. Then, gather the
I/O cables together for cable arrangement
7. Cover the I/O ports of the dock station with
the protective cover.
7
8. Determine that the I/O ports are covered and
the cable passes through the cable exit.
Cable out
Mounting the POS onto a Table
To avoid the dock station from backward tilting and wagging when a user
touches the LCD panel of MT-4008W set on the dock station, use the desktop-
mounting kit shipped with the DS-200/210 to hold and secure the dock station
firmly on a table. Please follow the steps below to mount the dock station.
1. Determine a position of a table onto which the dock station is mounted.
Then, take the desktop mounting bracket out of the desktop mounting kit
pack. Through the 2 holes formed on the bracket, drill 2 holes on the
table and plug 2 plastic anchors into the 2 holes. Then, hold the bracket
and then apply the 2 self-tapping screws into the 2 holes to secure the
bracket.
2. Align the 2 screw bolts on the bottom of the
dock station with the 2 tracks of the bracket.
3. Push hard the dock station backward along the 2 tracks of the bracket on
the table to firmly secure the dock station.
8
Charging the PG-200 Battery Pack and the MT-4008W
After completing in placing the MT-4008W tablet
PC provided with the PG-200 on the dock station and
then in plugging the power adaptor into the power
jack on the dock station, as described above, plug the
AC power adaptor cord into an electrical outlet for
starting to charge the PG-200 battery pack and the
tablet PC.
CAUTION!
1. When the tablet PC gives you a message indicating it will run out of
power, please fully charge the battery to avoid data loss.
2. Use only the power adapter that comes with your device. Using a
different power adapter may damage your device.
At this time, the battery of tablet PC will be firstly charged. When the battery
of tablet PC is fully charged, the battery pack loaded in the pistol grip will be
then charged. When the battery pack loaded in the pistol grip is fully charged,
the “FULL” LED indicator of the grip turns green.
When the tablet PC operates for a period of time, because the battery pack
loaded in the pistol grip constantly supplies power to the tablet PC, the battery
will be consumed. At this time, charge the battery pack with a power adaptor
through the dock station or change the battery pack immediately.
Powering ON the Dock Station
1. Press the power button of the dock station.
9
2. The power LED indicator stays bright and solid
blue when the dock station is powered ON.
Installing the Wi-Fi Printer Tools (for DS-210 ONLY)
The Wi-Fi printer tools make wireless connection between the DS-210 and the
MT-4008W tablet PC and allow you to easily do wireless settings of the Wi-Fi
printer. Follow the steps listed below to install the Wi-Fi AutoConnect.
1. On disk (C:) of your MT-4008W tablet PC, tap This PC Local Disk
(C:) Drivers WLPPMgr115. In the folder of WLPPMgr115,
double tap the Setup application for installation of the Wi-Fi Auto
Connect tool.
2. You will be guided through the installation process. When the tool
installation is completed, tap Finish.
10
Autres manuels pour DS-200
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels POSIFLEX Station d'accueil
