Polypipe UFHTFTM Manuel utilisateur

User’s manual
UFHTFTM - TFT Master Room
Thermostat
EN
www.polypipeufh.com
User’s manual
UFHTFTM - TFT Master Room
Thermostat

2
User’s manual

Table of contents
I. Safety 4
II. Description 5
III. Installation 6
IV. How to use the controller 7
V. Operation modes 8
V.a) Schedule 8
V.b) Manual mode 9
VI. Zones 10
VI.a) Zone name 10
VI.b) Schedule settings 11
VI.c) Manual operation 12
VII. Controller menu 13
VII.a) Time settings 14
VII.b) Screen settings 14
VII.c) Alarm clock settings 16
VII.d) Controller settings 16
VII.e) Protections 17
VII.f) Language 17
VII.g) About the program 17
VIII. Protections 17
IX. Soware update 17
3
UFHTFTMBP, UFHTFTMWP

I. Safety
Before using the device for the fi rst time the user should read the following regulations
carefully. Not obeying the rules included in this manual may lead to personal injuries
or controller damage. The user’s manual should be stored in a safe place for further
reference. In order to avoid accidents and errors it should be ensured that every person
using the device has familiarized themselves with the principle of operation as well as
security functions of the controller. If the device is to be sold or put in a diff erent place,
make sure that the user’s manual is there with the device so that any potential user has
access to essential information about the device.
The manufacturer does not accept responsibility for any injuries or damage resulting from
negligence; therefore, users are obliged to take the necessary safety measures listed in
this manual to protect their lives and property.
WARNING
• High voltage! Make sure the regulator is disconnected from the mains before performing
any activities involving the power supply (plugging cables, installing the device etc.)
• The device should be installed by a qualifi ed electrician.
• Before starting the controller, the user shoud measure earthing resistance of the
electric motors as well as the insulation resistance of the cables.
• The regulator should not be operated by children.
WARNING
• The device may be damaged if struck by a lightning. Make sure the plug is disconnected
from the power supply during storm.
• Any use other than specifi ed by the manufacturer is forbidden.
• Before and during the heating season, the controller should be checked for condition of
its cables. The user should also check if the controller is properly mounted and clean
it if dusty or dirty.
Changes in the merchandise described in the manual may have been introduced
subsequent to its completion on February 28th 2016. The manufacturer retains the right
to introduce changes to the structure. The illustrations may include additional equipment.
Print technology may result in diff erences in colours shown.
We are committed to protecting the environment. Manufacturing electronic
devices imposes an obligation of providing for environmentally safe
disposal of used electronic components and devices. Hence, we have been
entered into a register kept by the Inspection For Environmental Protection.
The crossed-out bin symbol on a product means that the product may not
be disposed of to household waste containers. Recycling of wastes helps to
protect the environment. The user is obliged to transfer their used
equipment to a collection point where all electric and electronic components
will be recycled.
4
User’s manual

II. Description
UFHTFTM room regulator is intended for cooperation with UFH8ZMP Wiring Centre. It may
control the operation of subordinate room regulators.
UFHTFTM room regulator should be installed in a particular heating zone.
Temperature information sent by it to the external controller is used to control the
thermostatic valves (by opening them when the room temperature is too low and closing
them when the pre-set room temperature has been reached). The room regulator enables
the user to adjust the pre-set room temperature and set weekly temperature schedules.
UFHTFTM room regulator enables the user to adjust certain settings for other
zones e.g. the pre-set temperature value, weekly schedule, zone name etc.
NOTE
Only one UFHTFTM room regulator may be used in a heating system.
Functions fulfi lled by the regulator:
• Wireless communication with UFH8ZMP
• Controlling room temperature
• Displaying settings: temperature, date, time
• Screen adjusting its brightness to diff erent times of the day
• Parental lock
• Alarm clock
• Screensaver – possibility of uploading photos, a slide show
• Software update via USB
• Controlling the settings of other zones e.g. the pre-set temperature, schedules, names
etc.
• Possibility of confi guring global schedule settings
Controller equipment:
• Front panel made of 2mm glass
• Wireless communication
• Large, easy-to-read, colour touchscreen
• Built-in temperature sensor
• Flush-mountable
5
UFHTFTMBP, UFHTFTMWP

III. Installation
The controller should be installed by a qualifi ed person.
WARNING
Risk of fatal electric shock from touching live connections. Before working on
the controller switch off the power supply and prevent it from being accidentally
switched on.
WARNING
ncorrect connection of the wires may damage the controller!
230V 50 Hz
L N
USB
PORT
6
User’s manual

IV. How to use the controller
1. Enter the controller menu
2. Current time and date
3. Current status of particular zones:
4. Zone name – it may be changed in the zone menu or via the Internet website (using
UFHINTMODP or UFHINTWIFIP Internet modules)
5. Current zone temperature
5. Pre-set zone temperature
How to use the controller
12
3
4
5
6
7
UFHTFTMBP, UFHTFTMWP

V. Operation modes
V.a) Schedule
After a given schedule has been activated, the pre-set temperature is adjusted according
to the schedule settings. Separate temperature values may be assigned to the maximum
of 3 time periods (see: Schedule settings).
In order to change current schedule,
tap on the screen in the place where current
operation mode is displayed (see: point 2 in
Zones section). Choose desired schedule from
the list which appears of the screen and tap on
it.
The user may choose between 2 types of zone schedules:
- global schedule – its settings are pre-defi ned via the Internet website or UFHTFTM master
room regulator,
- local schedule – individual settings for a particular zone.
In order to confi gure detailed settings, go to Menu / Schedule settings.
8
User’s manual

V.b) Manual mode
In order to activate manual mode, tap on the pre-set temperature displayed on the main
screen. Next, set the pre-set temperature value and defi ne how long it should apply in the
zone.
The pre-set temperature may be
adjusted using ▲and ▼ icons, or by dragging
the temperature slider (displayed on the left-
hand side of the screen). Press OK to confi rm.
Next, the user defi nes the pre-set
temperature application time (when this period
is time is over, the controller returns to the
previous operation schedule).
By tapping on the clock icon the user
may set the pre-set temperature to apply for
an indefi nite period of time. The part of the
main screen labelled no. 4 displays “CON”.
9
UFHTFTMBP, UFHTFTMWP

VI. Zones
UFHTFTM is a master regulator – it means that it may be used to adjust most parameters
for other zones, regardless of the type of room regulator or room sensor used in the zones.
In order to edit parameters of a particular zone, tap on the area of the screen
where the current status of a given zone is displayed. A zone editing screen will appear:
1. Return to the main screen
2. Room regulator operation mode – the pre-set temperature depends on the current
schedule or manual settings (manual mode). Tap here to open up schedule selection screen.
3. Current time and date
4. Enter the zone menu – tapping on this icon opens up the following options: Zone name,
Schedule settings and Operation.
5. Pre-set zone temperature – tap here to adjust the temperature
6. Time left before the next pre-set temperature change
7. Current zone temperature
VI.a)Zone name
This function is used to edit the name of the zone. The user may assign a diff erent name
to each zone e.g. bathroom, kitchen etc.
123
4
5
7
6
10
User’s manual
Table des matières
Autres manuels Polypipe Thermostat
Manuels Thermostat populaires d'autres marques

EWELLY
EWELLY EW-181 Manuel utilisateur

Prolon
Prolon T1100 Instructions d'installation

Computherm
Computherm Q20 Manuel utilisateur

Heatmiser
Heatmiser neoStat Manuel utilisateur

Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

















