Polygroup TG50P3D94L00 Manuel utilisateur

MODEL #: TG50P3D94L00

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V, 60Hz, 0.08A

Output: 28V DC 0.107A

Fig. B - Tree and Light Assembly

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from Polygroup®!

This tree comes with Simple Shape® technology-Set up and light up your tree in less than 10 minutes!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

5FT DAWSON PINE TREE ASSEMBLY INSTRUCTIONS

Fig. A - Tree Stand Assembly

Click

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and insert it into the assembled stand.Make sure

the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch

hinges.

7. Connect the light strings as per the color labels indicated in Fig. B and insert adapter plug into the wall outlet.Your entire tree

should now be lit. If some bulbs do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs.

Replace bulbs promptly in order to maintain the performance and life expectancy of your pre-lit tree. * The lights will remain lit

even if one bulb burns out.

Section 2

Tree top

Section 1

Insert Red Label

Plugs Into Red

Labeled Extension Cord

Insert Green

Label Extension

Cord into Adapter

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR 1-888-919-0070

NEED HELP?

Plug Adapter

Into Wall

Outlet

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to

the right, one to the left and one at the center of the main stem. (see Fig. C)

9. This is a Simple Shape

tree. Just slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps.Your Christmas

tree is now complete and ready to be decorated.

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure the power cord is properly connected with the adapter and the adapter is firmly plug to the wall outlet.

2. Check for loose connection between light string plugs and extension cords.

3. Please check for loose, broken or missing light bulbs and replace as needed.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Fig. D

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

a. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.

b. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.When products are used in

outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a

qualified electrician for proper installation.

c.This seasonal use product is not intended for permanent installation or use.

d. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.

e. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.

f. Do not let lamps rest on the supply cord or on any wire.

g. Unplug the product when leaving the house, when retiring for the night, or if left unattended.

h.This is not a toy. For decorative use only! To avoid risk of fire, burns, personal injury and electric shock it should not be played

with or placed where small children can reach it.

i. Do not use this product for other than its intended use.

j. Do not hang ornaments or other objects from cord, wire, or light string.

k. Do not close doors or windows on the product or extension cords as this may damage wire insulation.

l. Do not cover the product with cloth, paper or any material not part of the product when in use.

m.This product is equipped with push-in type lamps. Do not twist lamps.

n. Read and follow all instructions that are on the product or provided with the product.

o. SAVE THESE INSTRUCTIONS

STORAGE INSTRUCTIONS

1. Unplug adapter from the wall outlet first and then remove all ornaments and decorations.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in

both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the

bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity

may damage your tree.

Each tree includes hinge pins/washers, and for pre-lit trees spare bulbs are also included.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

Step 1

Grasp the power adapter or power cord plug, and than unplug from the power outlet. Do not pull the power cord.

LAMP REPLACEMENT

Step 2

Lift up lamp lock tab, then

pull the lamp and plastic lamp base

straight out of the lamp-holder.

Step 3

Replace with a new spare

lamp provided with this product.

(Reference figure only)

CAUTION:

1.To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product;

b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal,

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

2. Use only the adapter supplied with this product. Using a different adapter will damage the lights and may cause fire, or electrical

shock hazards.

USER SERVICING INSTRUCTIONS

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any replacement parts, troubleshooting, or if there are any questions or concerns about this product, please call

us at 1-888-919-0070 or visit www.polygroupstore.com and a customer representative will be happy to assist you.

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Questions or Comments?

We would love to hear about your

Member’s Mark experience! Visit us at:

samsclub.com/membersmarkhelp

Autres manuels Polygroup sapin artificiel

Polygroup

Polygroup TV46M3ADVC05 Manuel utilisateur

Polygroup

Polygroup TG70M3AW0X00 Manuel utilisateur

Polygroup

Polygroup TGC0P4740L00 Manuel utilisateur

Polygroup

Polygroup TG76M4C92C00 Manuel utilisateur

Polygroup

Polygroup TG90P4724D01 Manuel utilisateur

Polygroup

Polygroup TG76P3B17L03 Manuel utilisateur

Polygroup

Polygroup TV70M4G26C02 Manuel utilisateur

Polygroup

Polygroup Evergreen Classics TG76P4A73D06 Manuel utilisateur

Polygroup

Polygroup TG70M3L21C03 Manuel utilisateur

Polygroup

Polygroup TG76P4826P15 Manuel utilisateur

Polygroup

Polygroup TV50P3907C00 Manuel utilisateur

Polygroup

Polygroup TG76M3W48X00 Manuel utilisateur

Polygroup

Polygroup TG76P4223L21 Manuel utilisateur

Polygroup

Polygroup TV70M2389C26 Manuel utilisateur

Polygroup

Polygroup TG70M3V29X07 Manuel utilisateur

Polygroup

Polygroup TGA0M4865C01 Manuel utilisateur

Polygroup

Polygroup AR-P17004 Manuel utilisateur

Polygroup

Polygroup TG76M4B91D00 Manuel utilisateur

Polygroup

Polygroup TG7600NVQC20 Manuel utilisateur

Polygroup

Polygroup TG70P4842D08 Manuel utilisateur

Polygroup

Polygroup TG90P2657D21 Manuel utilisateur

Polygroup

Polygroup TG76P4751P02 Manuel utilisateur

Polygroup

Polygroup TG76M2I41L01 Manuel utilisateur

Polygroup

Polygroup TG66EH148C51 Manuel utilisateur

Manuels sapin artificiel populaires d'autres marques

Trim a Home

Trim a Home TY-S6-250L Manuel utilisateur

Sears

Sears Donner & Blitzen M44814 Manuel utilisateur

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manuel utilisateur

Costway

Costway CM23595US Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manuel utilisateur

Holiday Living

Holiday Living TV40EH339C01 Manuel utilisateur

CASARIA

CASARIA DBGB001 Manuel utilisateur

Alpine

Alpine CRD100L-WT Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manuel utilisateur

CASARIA

CASARIA 104006 Manuel utilisateur

Alpine

Alpine CRD111S-GN Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1001540584 Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manuel utilisateur

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manuel utilisateur

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1004363936 Manuel utilisateur

Polytree

Polytree TG66EH148C17 Manuel utilisateur