Polygroup Evergreen Classics AR-P20008A Manuel utilisateur

MODEL #: AR-P20008A

TREE ASSEMBLY INSTRUCTIONS

3. Each tree section is numbered with a sticker. Please identify all sections before assembling.

4. Assemble the tree from bottom to the top. Start with the bottom section and remove the protective cap before inserting into the

assembled stand. Make sure the pole is firmly inserted and secured into the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all wires are free of branch hinges.

7. Connect the light strings as per the color labels indicated in Fig. B and insert green label adapter into the wall outlet, your entire

tree should now be lit.

NEED HELP?

DO NOT RETURN TO STORE. PLEASE VISIT US AT:

www.polygroupstore.com OR +1 (888) 919-0070

Fig. B - Tree and Light Assembly *Electrical Rating For The Tree

(For Indoor Use Only)

Input: AC 100-240V, 50/60Hz, 0.35A

Output: DC 29V 0.45A

Controller: 0.45A

Insert Green

Label Extension

Cord into Adapter

Plug Adapter

Into Wall

Outlet

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

TREE ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new tree from Polygroup®!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

Fig. A - Tree Stand Assembly

Click

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

Control box

Foot Pedal

on/off switch

Tree top

Section 1

Section 2

Insert Red Label

Plugs Into Red

Labeled Extension Cord

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out

one to the right, one to the left and one at the center of the main stem. (See Fig. C)

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to

fill any gaps.Your Christmas tree is now complete and ready to be decorated.

For Pre-lit Trees, If The Tree Does Not Illuminate

1. Please check to make sure that all plugs are properly connected according to the color labels indicated in Fig.B and the

adapter is plugged into the wall outlet. Refer to assembly guide for instructions. (If the tree comes with a foot pedal, try

stepping on the on/off button).

2. Check for loose connection between light string plugs and extension cords.

Loose Hinge Pin

1. Extra hinge pins are included for repairing the hinges.

Place the branch into the slot of the bracket.

2. Insert a new hinge pin through the hole and secure

using the retainer washer. (See Fig. D)

TROUBLESHOOTING TIPS

Fig. D

STORAGE INSTRUCTIONS

1. Remove all ornaments and decorations. First unplug adapter from the wall outlet and then disconnect light extension cord

between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to remove from section

below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and rotate the upper pole in

both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches toward the pole until the

bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.

6.When not in use, please store your tree in a cool, dry place away from sunlight.Exposing your tree to excessive heat or humidity

may damage your tree.

CAUTION:

To reduce the risk of fire and electric shock:

a) Use only the power supply that was provided with this product. Using a different adapter will damage the lights and may cause

fire, or electrical shock hazards.

b) Do not install on trees having needles, leaves or branch covering of metal or materials which look like metal.

c) Do not mount or support strings in a manner that can cut or damage wire insulation.

Press the selector button on the “Dual Color Light Controller” or “Remote Controller”

to select among: (1) CLEAR - MULTI: FADING (2) CLEAR: FADING

(3) CLEAR - MULTI: ALTERNATING (4) CLEAR: STEADY

(5) CLEAR - MULTI: SLOW FADING (6) MULTI: STEADY

(7) MULTI: FADING (8) COMBINATION

DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL

REMOTE CONTROL INSTRUCTIONS

1. Remove the insulation tab.

2. Press either selector button and wait for a second to enjoy light effects in the following sequence

(see DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL).

Remote

Control Light

Controller

Selector Button

Insulation Tab

Each tree includes hinge pins/washers.

If extra parts are needed, please contact our customer service center.

SPARE PARTS

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact us at +1 (888) 919-0070

or visit our website at www.polygroupstore.com. One of our customer service representatives will be happy to assist you.

CUSTOMER SERVICE FOR CHRISTMAS TREES

Tree ID#:

Tree UPC#:

Store Purchased:

Specify Problem:

Customer Name:

Address:(No P.O. Boxes)

City & State:

Zip Code:

Day Phone:

Date Purchased:

TREE ID# IS LOCATED ON END PANEL OF BOX.TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

WARNING

1. Dispose used battery properly. observe local regulations regarding disposal of hazardous waste.

2. Ensure the batteries are installed correctly with regard to polarity (+ and -).

3. This product is powered by a lithium battery. Due to their small size, lithium batteries can easily be swallowed by children.

Ingestion of such batteries has been known to cause death.

4. Do not expose light set to moisture.

5. Remove batteries when not used for an extended period of time, or when depleted.

6. Clean the battery contacts prior to battery installation.

7. The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed.

8. Dispose of used batteries properly, and local laws and regulations regarding the disposal of hazardous waste.

9. Use only CR2032 batteries for the remote controller.

10. Do not dispose of batteries in fire. Batteries may explode or leak.

11. This is a lithium battery which if swallowed has been known to cause death.

12. Small parts, keep batteries out of reach of children.

BATTERY REPLACEMENT

1. Loosen the screw of the battery cover with a screwdriver (not included).

2. Replace the used battery with a new CR2032 button cell battery (not included). Make sure that the battery is installed

with the correct polarity (+ and -).

3. Retighten the screw to close and secure the battery cover.

Cover

Battery

CR2032

Autres manuels Polygroup sapin artificiel

Polygroup

Polygroup TG90P3693L00 Manuel utilisateur

Polygroup

Polygroup 212T-206/48-100CL Manuel utilisateur

Polygroup

Polygroup TG76M4244C01 Manuel utilisateur

Polygroup

Polygroup TG90P4724D01 Manuel utilisateur

Polygroup

Polygroup TG46M6159C00 Manuel utilisateur

Polygroup

Polygroup TG76M2S85L04 Manuel utilisateur

Polygroup

Polygroup TG60EH117X20 Manuel utilisateur

Polygroup

Polygroup TG70P4842D03 Manuel utilisateur

Polygroup

Polygroup TG76P3831D07 Manuel utilisateur

Polygroup

Polygroup Home Heritage TG90M3W92D00 Manuel utilisateur

Polygroup

Polygroup Home Heritage TG7000GHDL01 Manuel utilisateur

Polygroup

Polygroup TG76M2T20D08 Manuel utilisateur

Polygroup

Polygroup TV50M3AVBL00 Manuel utilisateur

Polygroup

Polygroup TG4600EHFC00 Manuel utilisateur

Polygroup

Polygroup NOMA ADVANCED 151-8410-6 Manuel utilisateur

Polygroup

Polygroup TG76P4371C02 Manuel utilisateur

Polygroup

Polygroup TGC0P4766L02 Manuel utilisateur

Polygroup

Polygroup Home Heritage TG5000GHDL00 Manuel utilisateur

Polygroup

Polygroup TG50P4B42K04 Manuel utilisateur

Polygroup

Polygroup TV70M2389C23 Manuel utilisateur

Polygroup

Polygroup TGC0P3499C17 Manuel utilisateur

Polygroup

Polygroup TG66EH035S01 Manuel utilisateur

Polygroup

Polygroup TG66M3AKJD01 Manuel utilisateur

Polygroup

Polygroup EZ Connect Color Blast TG66P4826P00 Manuel utilisateur

Manuels sapin artificiel populaires d'autres marques

Trim a Home

Trim a Home TY-S6-250L Manuel utilisateur

Sears

Sears Donner & Blitzen M44814 Manuel utilisateur

BETHLEHEM LIGHTING

BETHLEHEM LIGHTING 6.5’ Tinsel Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P3D93L08 Manuel utilisateur

Costway

Costway CM23595US Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76P4C15D03 Manuel utilisateur

Holiday Living

Holiday Living TV40EH339C01 Manuel utilisateur

CASARIA

CASARIA DBGB001 Manuel utilisateur

Alpine

Alpine CRD100L-WT Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG76M3W89C00 Manuel utilisateur

CASARIA

CASARIA 104006 Manuel utilisateur

Alpine

Alpine CRD111S-GN Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1001540584 Manuel utilisateur

Home Accents Holiday

Home Accents Holiday TG90P3F28D00 Manuel utilisateur

Williams-Sonoma

Williams-Sonoma TG46P4368L01 Manuel utilisateur

Trim a Home

Trim a Home 7.5 ft. Berkshire Fir Tree Manuel utilisateur

Home Accents Holiday

Home Accents Holiday 1004363936 Manuel utilisateur

Polytree

Polytree TG66EH148C17 Manuel utilisateur