Polycom SoundPoint IP 500 Manuel utilisateur

Barracuda Phone System

Polycom IP-500 Quick Reference Guide 1 / 4

Polycom IP-500 Quick Reference Guide

https://campus.barracuda.com/doc/45712698/

This article explains the basic operation of the Polycom IP-500 device.

Soft Keys

The four buttons immediately below the LCD display are soft keys.

Each soft key will perform the action that is described immediately above it on the display.

Soft key behavior is context sensitive – the associated soft key action changes according to the

current phone state.

Place a Call

Enter the desired internal extension or external number.

Lift the receiver or press the speakerphone button to call.

Voicemail Access

To access voicemail messages, press the Messages key to the right of the keypad.

Depending on your system conﬁguration, you may be asked for your voicemail passcode.

Last Number Redial

Lift the receiver.

Press the Redial button.

For speakerphone or headset use, press Redial without lifting the handset.

Barracuda Phone System

Polycom IP-500 Quick Reference Guide 2 / 4

Call Hold

To place a call on hold, press the Hold button.

To resume the call, press Hold again.

Call Transfer

Attended Transfer

To transfer a call, press the Transfer key to the left of the keypad.

Dial the destination number, then press Send.

When the destination party answers, announce the caller, and press Transfer again to

complete the transfer.

Blind Transfer

To transfer a call, press the Blind soft key and enter the destination number.

Press the Send soft key to connect the remote party to the destination, and to disconnect

yourself from the call.

Ad-Hoc Conference / 3-Way Calling

Place (or receive) a call.

To add another party to the call, press the Conference key to the left of the keypad.

Enter the destination number or extension and press Send.

When the destination party answers, press Conference again.

All parties now join a 3-way call.

Do Not Disturb

Press the Do Not Disturb button to send all calls to voicemail. The phone display indicates

when Do Not Disturb mode is active.

To resume normal operation, press the Do Not Disturb button again. The phone receives calls

normally.

Call Forwarding

Barracuda Phone System

Polycom IP-500 Quick Reference Guide 3 / 4

To enable call forwarding, press Menu, then select Features, then select Forward.

Select the type of forwarding to enable, then select a destination.

The phone display indicates when call forwarding is enabled.

To deactivate forwarding, press the Forward soft key then press Disable.

Ringer and Handset Volume

To change the ringer volume, when the phone is idle, press the (–) or (+) button at the bottom

of the keypad.

To change the volume of a call, during an active call, press the (–) or (+) buttons to adjust the

volume of the handset, speakerphone, or headset, whichever is active.

Directories

To browse the phone contact list or call lists, press Menu, then Features, then Directories.

The call lists show missed, placed, and received calls.

Special Characters

When entering a destination with alphanumerics or special characters, be sure to pause

momentarily between key presses. For example, when dialing **<ext>, press *, pause for a

moment, press * again, then dial the extension.

Barracuda Phone System

Polycom IP-500 Quick Reference Guide 4 / 4

Figures

worddav28373698f399968a10811c36d789de28.png1.

portion of this document may be copied, distributed, publicized or used for other than internal documentary purposes without the written consent of

an oﬃcial representative of Barracuda Networks Inc. All speciﬁcations are subject to change without notice. Barracuda Networks Inc. assumes no

responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this

publication without notice.

Autres manuels pour SoundPoint IP 500

Table des matières

Autres manuels Polycom Téléphone

Polycom

Polycom SoundStation Premier Manuel utilisateur

Polycom

Polycom VVX 500 Manuel d'instructions

Polycom

Polycom SoundPoint IP 550 Manuel utilisateur

Polycom

Polycom 2-Line Phone Manuel utilisateur

Polycom

Polycom VVX 501 Manuel utilisateur

Polycom

Polycom VVX 101 Manuel utilisateur

Polycom

Polycom SoundPoint IP 32 Series Manuel d'instructions

Polycom

Polycom Integra VVX 500 Manuel utilisateur

Polycom

Polycom VVX 300 Manuel utilisateur

Polycom

Polycom VVX 601 Manuel utilisateur

Polycom

Polycom SoundPoint IP 331 Manuel utilisateur

Polycom

Polycom VVX410 Manuel utilisateur

Polycom

Polycom VVX410 Manuel d'instructions

Polycom

Polycom Telstra VVX410 Manuel utilisateur

Polycom

Polycom SoundPoint IP 600 SIP Manuel utilisateur

Polycom

Polycom Polycom SoundPoint IP 430 Manuel d'instructions

Polycom

Polycom VVX 400 Manuel utilisateur

Polycom

Polycom VVX 500 Manuel d'instructions

Polycom

Polycom VVX 201 Manuel utilisateur

Polycom

Polycom VVX 501 Manuel d'instructions

Polycom

Polycom SoundPoint IP 331 Manuel utilisateur

Polycom

Polycom SoundPoint IP 300 Manuel utilisateur

Polycom

Polycom COMMUNICATOR C100S Mode d’emploi

Polycom

Polycom VVX 310 Manuel d'instructions

Manuels Téléphone populaires d'autres marques

GE 2-9480 Manuel utilisateur

Geemarc

Geemarc PHOTOPHONE 155 Manuel utilisateur

D-Link

D-Link DWR-720/PW Manuel utilisateur

Interquartz

Interquartz Gemini IQ333 Manuel utilisateur

SSS Siedle

SSS Siedle HT 840-0 Manuel utilisateur

Motorola

Motorola TITANIUM Manuel utilisateur

Panasonic

Panasonic ICX Manuel utilisateur

LG H870DS Manuel utilisateur

Samsung

Samsung GT-I9500 Manuel utilisateur

AT&T

AT&T Trimline 205 Manuel utilisateur

Selta

Selta zenyth 600 Manuel utilisateur

Doro

Doro AFTI 20 Manuel utilisateur

UNIQCELL

UNIQCELL A1 Manuel utilisateur

Panasonic

Panasonic KX Series Manuel utilisateur

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manuel utilisateur

BT Decor 425 Manuel utilisateur

NEC

NEC SV8500 Manuel utilisateur

Teledex

Teledex PEARL Manuel utilisateur