Polycom VVX 400 Series Manuel utilisateur

Full Guide - VVX 400

Button Guide & Descriptions

1–Keypad

2–Transfer

3–Voicemail

4–Hold

5 –Volume

6 –Home

7 –Directional Pad & Select

8 –Headphone On/Off

9–Speakerphone On/Off

10 –Mute

11 –Softkeys

12 –Voicemail Softkey

13 –Park Softkey

14 –Pickup Softkey

15 –Page All Softkey

16 –New Call Softkey

17 –Forward Softkey

18 –Do Not Disturb Softkey

1–Keypad

Input for Numbers and Letters.

2–Transfer

Press to transfer a phone call to another extension.

3–Voicemail

Press to check your voicemail.

4–Hold

Press to put a call on hold. Press again to bring a call back from hold. This is local to your phone only.

Another extension cannot pick this call up.

5–Volume

While the handset is hung up pressing this button adjusts ring volume. While the handset is picked up

pressing this button adjusts call volume.

6–Home

Press to return to the phone’s home menu.

7–Directional Pad & Select

Directional input for navigating through phone menus. Press the center button to select the currently

highlighted option.

8–Headphone On/Off

Press this button to toggle the use of your headset. While in an idle state, pressing this button will

present a dial tone and bring you to the dialing page of your phone - much like pressing the

speakerphone button or picking up the handset. While in a phonecall, it redirects the audio and

microphone to your headset. Be careful, if you press this button while using your headset on a call you

will hangup the current call.

9 –Speakerphone On/Off

Press this button to toggle the use of your phone speaker. While in an idle state, pressing this button will

present a dial tone and bring you to the dialing page of your phone - much like pressing the headphone

button or picking up the handset. While in a phonecall, it redirects the audio and microphone to your

phone speaker. Be careful, if you press this button while using your speakerphone on a call you will

hangup the current call.

10 –Mute

Press this button to mute and unmute the microphone.

11 –Softkeys

These buttons correspond to customized onscreen actions. Often they will be lit with a red light

signifying that the corresponding onscreen action is currently in use by yourself or another extension on

your phone system.

12 –Voicemail Softkey

Press to check your voicemail.

13 –Park Softkey

Press this button to park a call. Parking a call is like holding a call, except it allows any extension to pick

up the call. Calls are parked sequentially in pickup slots.

14 –Pickup Softkey

Press these buttons to pick up a parked call. When a call is parked in a pickup slot, the red light on the

softkey will be lit.

15 –Page All Softkey

Press this button to page all phones in your phone system via their internal speakers; these are the same

speakers used for the speakerphone. This is not a 2-way conversation, only the person paging all will be

heard.

16 –New Call Softkey

Press this button to bring up a dial tone and the dialing screen on your phone.

17 –Forward Softkey

Press this button to bring yourself to the call forwarding menu. This menu allows you to forward your

calls to external phone numbers (i.e. your cellphone) based on some basic behaviors. If you require

some more advanced call forwarding options please contact the Perfect Cloud Solutions WatchGuard

Technical Support team.

18 –Do Not Disturb Softkey

Press this button to send all inbound phone calls directly to your voicemail.

Common Dialing Codes

*97 –Voicemail for the primary extension on your phone.

*98 –Voicemail for another extension on your phone network.

*80 + Ext. # - Intercom directly to an extension.

*65 –Reads your current extension number (for phones that don’t display extensions).

*43 –Performs an Echo Test. This allows you to test your call quality and latency.

*60 –Speaks the Time.

Basic Functions

Setting up and checking your Voicemail

Please note that not all extensions are configured with a voicemail box. If you require a voicemail box

but your extension is not configured with one, please contact Perfect Cloud Solutions WatchGuard

Technical Support to have one added.

1. Press the “Voicemail” button on the display screen. Alternately, you can always dial *97 to

access your voicemail.

2. You will hear “Password” when the voicemail system answers. Enter your password using the

keypad on the phone.

First Time Users - You must change your password from the default or it will take you to this

menu every time you enter voicemail.

a. If you have not yet setup your Voicemail; your password will be your extension number.

b. New users will be taken through a guided setup process.

c. The three greetings you will record are the following:

i. Speak your name

ii. Create a phone busy greeting

iii. Create an unavailable greeting

Creating a Temporary Greeting

The voicemail temporary greetings can be used to inform callers that you are on vacation, traveling, etc.

This greeting can be changed at any time and will over-ride the other greetings until removed.

To create a temporary greeting:

a. Click on Voicemail button

b. Enter your password

c. Press “0” for mailbox options

d. Press “4” to create a temporary greeting

e. Record the temporary greeting and hit #

f. Press “1”to accept or “2” to re-record

To remove the Temporary Greeting:

a. Click on Voicemail button

b. Enter your password

c. Press “0” for mailbox options

d. Press “4” to select the temporary greeting

e. Press “2” to erase and the system will automatically remove the temporary greeting and

revert back to your existing greetings.

Placing a caller on hold (The call will remain on your phone until you transfer it)

1. While on a call press this button.

2. To pick up the call, press this button.

Parking a call (The call will be placed on a “Pickup”softkey to be picked up on another

extension)

The Parking Lot feature allows you to place a call in a temporary holding space where it can be retrieved

from any extension within the company.

1. While on a call press the “Park” softkey on the screen.

2. Hang up the receiver and the call will be sitting in one of the “Pickup” slots (the system will

automatically select a “Pickup button”).

3. On any extension, press the appropriate “Pickup” softkey.

4. You will hear a tone indicating the call has been successfully picked up.

Transferring a call

1. While on a call press this button (Transfer). You will hear a dial tone.

2. To transfer, simply dial the extension or the phone number.

a. This can be an internal extension number like “1022”.

b. Or an external phone number like ‘3035570371’).

3. Then press “Send”.

a. If you want to announce who is calling, remain on the line until the recipient answers. When

you are ready to send the call, press the button again.

b. If you want to blind transfer (send the call without talking to the recipient first), press the

button again immediately after you hear ringing.

c. If you want to forward directly to voicemail, just dial the extension with an asterisk in front

(i.e. *1022 instead of just 1022).

Paging All Phones

To make a page, press the “Page All”softkey on the screen. You will hear a tone indicating the page has

begun. Speak your message and hang up when done. This is a one-way announcement to all extensions

and recipient cannot respond.

Paging One Phone (Intercom)

1. To intercom a single extension simply dial *80xxxx.

-(Replacing the xxxx with the user’s extension number).

2. A notification tone will be played to the recipient to inform them of the connection.

3. Unlike paging all phones, this is a two way conversation between the originator and one

recipient.

Create a Conference Call (3-Way)

1. While on a call, press the “More” softkey on the bottom of the screen, followed by the

“Confrnc” softkey. This will place the first caller on hold.

2. Dial the number of the additional person (extension, speed dial, or external phone number).

3. If you are dialing internally via extension, press the “Send” button after dialing. This will

connect you to the third caller. If dialing to an external number [ex: (XXX) XXX-XXXX], the call will

begin upon completion of the dialing process (No “Send” required).

4. You may speak to the person individually first, and then press the “More” and “Confrnc”

softkeys again. This will connect all three callers into one call.

Forwarding your Calls

1. Press the “Forward” softkey on the bottom row of the phone’s default display.

2. Choose which type of forward you prefer:

i. Always –This will forward all calls to the number provided immediately. Your

deskphone will not ring at all.

ii. No Answer –This will forward all calls to the number provided after they have

finished ringing to your deskphone.

iii. Busy –This will forward all calls to the number provided if you are already on

the phone at the time of the current incoming phone call.

iv. If you’d prefer a more advanced forward, please contact the Perfect Cloud

Solutions WatchGuard Technical Support team.

3. Once you’ve selected a forward option, type in the phone number where you want to forward

your calls and select “Enable”.

4. To disable your forward just go back to the forwarding menu, select the enabled forward you

wish to disable, and then choose “Disable” from that forwarding option’s softkeys.

FAQ –Frequently Asked Questions

How do I customize my phone (i.e. background image, speed dials, & other softkey functions)?

Submit a support ticket through the PCS online portal with your extension and preferred

changes and we will update your phone for you.

Why is my phone displaying SIP numbers instead of phone numbers?

On the dialing menu, the third softkey on the bottom row toggles URL and Number displays. If

your phone numbers are appearing as SIP numbers, simply flip the phone back to Number

mode to return your phone to the normal dialing style.

How do I transfer a call that I’ve put on hold?

You can’t! You must put that call into Park or Transfer it live.

How do I transfer a call directly to an extension’s voicemail?

Simply transfer as normal, except dial an * in front of the extension number (So if you wanted

to transfer to extension 1001’s voicemail, you’d transfer to *1001).

For any further questions, issues, or more advanced services and features contact

the Perfect Cloud Solutions WatchGuard Technical Support team.

Submit a Support Ticket: https://myaccount.perfectcloudsolutions.com/clientarea.php

Email: networkadminteam@perfectcloudsolutions.com

Call: 855.771.VOIP (8647)

Autres manuels pour VVX 400 Series

Table des matières

Autres manuels Polycom Téléphone IP

Polycom

Polycom VVX 500 series Manuel utilisateur

Polycom

Polycom VVX 311 Instructions d'utilisation et de sécurité

Polycom

Polycom VVX 150 Manuel utilisateur

Polycom

Polycom SoundPoint IP 321 Manuel d'instructions

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom SoundPoint IP 550 Manuel utilisateur

Polycom

Polycom SoundPoint IP 550 Manuel d'instructions

Polycom

Polycom SoundPoint IP 670 Manuel utilisateur

Polycom

Polycom VVX D230 Manuel utilisateur

Polycom

Polycom SoundPoint IP 600 Manuel utilisateur

Polycom

Polycom SoundPoint IP 321 Guide d'installation

Polycom

Polycom VVX 411 Instructions de montage

Polycom

Polycom CX700 Manuel utilisateur

Polycom

Polycom VVX 400 Series Manuel utilisateur

Polycom

Polycom Soundpoint IP 301 Manuel utilisateur

Polycom

Polycom SoundStation IP 7000 Manuel utilisateur

Polycom

Polycom SoundPoint IP 331 Manuel d'installation et d'exploitation

Polycom

Polycom Polycom SoundPoint IP 430 Manuel d'instructions

Polycom

Polycom VVX410 Manuel utilisateur

Polycom

Polycom SoundPoint IP 670 Manuel d'instructions

Polycom

Polycom BUSINESS VOICEEDGE 335 series Manuel utilisateur

Polycom

Polycom SoundPoint IP 650 Manuel utilisateur

Polycom

Polycom 300 series Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur

Meridian

Meridian M5009 Manuel utilisateur