Polycom SoundPoint MAXCS 7.5 Manuel utilisateur

MAXCS 7.5 Polycom SoundPoint User Guide Page 1

MAXCS 7.5

Polycom®SoundPoint Phone User Guide

This guide shows how to use the following Polycom®SoundPoint model phones

with MAXCS Release 7.5 client applications.

•IP321

•IP331

•IP550*

•IP650*

•IP670*

*These models support advanced features via the MAXCS Polycom Advanced Features license.

Before you can use your Polycom phone with MAXCS clients, your administrator must configure your phone to work with

MAXCS system.

Refer to the documentation that came with your Polycom phone to connect the cables to your phone, and for any other

basic phone information.

Some SoundPoint models offer softkeys; unless otherwise noted, press either the softkey or the physical phone key as

noted in this guide.

Known Limitations

•The following AltiGen feature codes do not work on Polycom phones: #12, #26, #27, #44, #45, #46, #81, #82

•Forwarding calls is not supported.

Navigation

To scroll, use or.

To move between menu levels, use or.

To disable or enable a setting, use or.

To enter data or select an entry, press .

To delete a character, press .

Answer Incoming Calls

To answer an incoming call,

1Press Answer, press Speaker,or pick up the handset.If you have a

headset connected, press Headset.

2To end the call, press Speaker or hang up the handset. If you are

using a headset, press Headset.

MAXCS 7.5 Polycom SoundPoint User Guide Page 2

Make Outgoing Calls

To place a call, press New Call, lift the handset, or press Speaker and start dialing.

If you have a headset connected, press Headset and start dialing.

To place a call from an entry in your Directory (more on the Directory on

page 3),

1Press Directories. Select Contact Directory.

2Select the entry and press Dial.

To place a call from an entry in your Call List,

1Press Directories. Select Call Lists.

2Select either Missed Calls, Received Calls, or Placed Calls.

3Choose an entry and press Dial.

Place Calls on Hold

To place an active call on hold,

1Press Hold.

2To retrieve the call, press Resume.

Transfer Calls

Note: When transferring calls to or from a Polycom phone, in some scenarios the Caller ID will show as your caller ID

instead of that of the original call.

The method for transferring a call will vary, depending upon your intent:

•When transferring a call to a live person and you want to intro-

duce the call before switching it over, use what is commonly

referred to as a Supervised transfer.

•In all other scenarios, we recommend that you perform a Blind

transfer instead of a Supervised transfer. This includes transfers

to Workgroup queues, voicemail systems, and so on.

Supervised Transfers

1While on a call, press Transfer. The call is placed on hold.

2Call the person to whom you want to transfer this call.

3After speaking with the recipient, press Transfer again.

To cancel a transfer, press Cancel. You will automatically reconnect with the call.

Blind Transfers

1. While on a call, tap Transfer. The call is placed on hold.

2. Tap More. Tap Blind.

MAXCS 7.5 Polycom SoundPoint User Guide Page 3

3. Enter the extension number or choose the number from the Directory or Favorites list.

4. Hang up; the call will automatically transfer. You do not need to wait to hear ringing on the line.

Conference Calls

To initiate a conference,

1Call the first conference member.

2While connected, press Conference. The active call will automatically be

placed on hold.

3Call the next participant and press Conference again.

4To add additional participants (up to 6 participants per conference call),

repeat these steps.

Directory

To enter names and phone numbers in the Directory you will use the number

keypad:

•Toggle between the three entry modes (numbers, uppercase letters,

and lowercase letters) by pressing the I/A/a key. The top line of

your display will indicate your current entry mode.

•To move to the next field, press the down arrow key.

To add a contact to your Directory,

•Press Directories. Select Contact Directory.

•Select More. Select Add.

•Enter the contact’s name. Press down arrow to move to the Last Name

field.

•Press the I/A/a key to switch to number entry mode for the Contact

(phone number) field.

•(Optional) Specify a speed dial number.

•Press Save. Press Directories to close the menus.

To save a recent caller to your Contact Directory,

1Press Directories. Select Call Lists.

2Select either Missed, Received, or Placed Calls.

3Select the entry that you want to save.

MAXCS 7.5 Polycom SoundPoint User Guide Page 4

4Select More. Select Save to store the contact in to your Directory.

5Press Directories to close the menus.

Multiple Call Handling

If your administrator has enabled Multiple Call Waiting for your extension,

then your Polycom phone can handle multiple calls in a ‘queue.’ You can

switch from one call to another, and even join several queued calls into a

conference call.

If you are on a call and a new call comes in, the incoming call will appear on

your phone display.

To answer the new call, select it and press Answer. The first call will

automatically be placed on hold.

If you do not answer the incoming call, it will follow your extension’s Ring No Answer call handling rules.

Station Login

If you have several work locations with phones assigned to you, you can switch your extension between them as needed.

For example, you may have one phone at work and one phone at home.

Before you can use this feature you must have already completed the initial configuration of the Polycom phone, including

the MAXCS server address and third-party phone password.

To switch your extension to your other phone,

1On the Polycom phone, press the Speaker button and tap #17.

2When prompted, enter your extension and password.

MAXCS will verify your credentials, log your extension off of the previous phone, and then reboot this phone.

Working with MAXCS Clients

You can perform many actions via your phone or via MaxAgent (or another client). Whichever device you initially use, you

must continue using that device until all calls drop or only one call is connected.

For example, if you put a call on hold via MaxAgent, to resume the call use MaxAgent. Likewise, if you answer multiple calls

via your phone, to release calls (or perform other actions), use your phone.

Voicemail

To hear voicemail messages,

1Press Messages.

2Select Connect.

3When prompted, enter your password and respond to the

prompts in the voicemail system.

MAXCS 7.5 Polycom SoundPoint User Guide Page 5

Advanced Features

The IP-550, IP-650, and IP-670 models support extra functionality, if the phone has been assigned a MAXCS Polycom

Advanced Features license:

•Polycom paging

•DND Synchronization

•BLF / Line Monitoring

•Line Park

Paging

If your Administrator included you in a Polycom paging group, you can page other users in that group.

Note that Polycom paging works only between Polycom phones that are on the same network.

•Group 1 is the default, and appears at the top of the paging group

list.

•Group 24 (Priority group) will override any active calls.

•Group 25 is the Emergency paging group.

•Other paging groups that your Administrator has set up are

numbered 2-23.

To send a page,

1Press Paging. (If you do not see this key, then your Administrator has

not configured paging for your extension.)

2Select the group that you want to page.

3Press Page.

4Wait a few seconds, and then begin speaking.

5When you finish speaking, press the End Page button.

If you receive a page, your phone will play a brief tone, and then you will hear the page.

DND Synchronization

When you toggle Do Not Disturb mode on and off via the phone display or via MaxAgent or another client, all devices and

clients will synchronize the DND status.

To turn on DND,

1Press the Do Not Disturb button.

2To cancel your DND state and accept calls again, tap the button again.

MAXCS 7.5 Polycom SoundPoint User Guide Page 6

Line Monitoring / BLF

If your administrator configured your extension to monitor other extensions, you will see those extensions on your display.

Colors indicate the state of each monitored extension:

•Fast flashing green—The extension has an incoming (ringing) call.

•Solid red—The extension has an active call.

– This symbol on your screen indicates that the extension is not registered to the MAXCS system.

To pick up an incoming call to a monitored extension, press the key for that extension.

To dial a monitored extension (when the line is not ringing), press the key for that extension.

Line Park

To park a call,

1While on a call, press any available Line Park button.

2When you are ready the retrieve the parked call, press the Line Park button again.

AltiGen Communications, Inc.

679 River Oaks Parkway

San Jose, CA 95134

Telephone: 888-AltiGen (258-4436)

Fax: 408-597-9020

E-mail: info@altigen.com

Web site: www.altigen.com

All product and company names herein may be trademarks of their registered owners.

Your extension (if you have enabled Do

Not Disturb, you will see an X here).

Monitored extensions (4)

Line Park slots

Autres manuels pour SoundPoint MAXCS 7.5

Table des matières

Autres manuels Polycom Téléphone IP

Polycom

Polycom IP 501 Manuel utilisateur

Polycom

Polycom VVX 500 series Manuel utilisateur

Polycom

Polycom SoundStation IP 5000 Manuel d'instructions

Polycom

Polycom SoundPoint IP 3 Series Manuel utilisateur

Polycom

Polycom VVX410 Manuel d'instructions

Polycom

Polycom VVX 201 Manuel utilisateur

Polycom

Polycom VVX 201 Manuel utilisateur

Polycom

Polycom SoundPoint IP 601 Manuel utilisateur

Polycom

Polycom VVX 601 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 300 Manuel utilisateur

Polycom

Polycom SoundPoint IP 601 Manuel utilisateur

Polycom

Polycom BUSINESS VOICEEDGE 335 series Manuel utilisateur

Polycom

Polycom VVX 350 Manuel utilisateur

Polycom

Polycom SoundPoint IP 450 Manuel utilisateur

Polycom

Polycom VVX 400 Series Manuel utilisateur

Polycom

Polycom SoundPoint IP 320 Mode d’emploi

Polycom

Polycom VVX 600 series Manuel utilisateur

Polycom

Polycom SoundPoint IP 321 Manuel utilisateur

Polycom

Polycom SoundStation IP 5000 Manuel utilisateur

Polycom

Polycom VVX Series Manuel utilisateur

Polycom

Polycom SoundStation IP 5000 Manuel utilisateur

Polycom

Polycom IP 331 Manuel utilisateur

Polycom

Polycom Integra VVX 500 Manuel utilisateur

Polycom

Polycom SoundPoint IP 560 Manuel utilisateur

Manuels Téléphone IP populaires d'autres marques

Alcatel

Alcatel 4028 Manuel utilisateur

Cisco

Cisco SPA-500 Series Manuel utilisateur

Proximus

Proximus Maestro 3016 IP Manuel utilisateur

Fanvil

Fanvil X4 Manuel utilisateur

Cisco

Cisco 7962 Manuel utilisateur

Snom

Snom 320 Manuel utilisateur

Yealink

Yealink Yealink SIP-T46G Manuel utilisateur

Avaya

Avaya 4625SW Manuel utilisateur

Yealink

Yealink SIP-T52S Manuel utilisateur

Nortel

Nortel 1140E Manuel utilisateur

Nexotek

Nexotek NT-P500 Manuel utilisateur

Avaya

Avaya Integral 5 R3.0 Manuel utilisateur

GE 28320EE2 - Dect 6.0 InfoLink 2 Manuel utilisateur

Avaya

Avaya 4600 Series Manuel de service

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP Manuel utilisateur

Nortel

Nortel i2050 Manuel utilisateur

Fiberme

Fiberme FAP260 Series Manuel utilisateur

Meridian

Meridian M5009 Manuel utilisateur