Polaroid SprintScan 45 Ultra Fiche technique

Installation Quickstart

English 3

System Requirements

Macintosh Systems

• A Power Macintosh computer (includes Power Macintosh

G3 and G4 computers) or compatible with a PowerPC

processor and 64 megabytes (MB) of RAM.

• Apple system software version 7.6 or later.

• 400 MB of free disk space.

• Scratch disk space equal to twice the ﬁnal image ﬁle size

plus 4 MB.

• A video adapter and monitor capable of displaying

thousands of colors, minimum. 24-bit color (16.7 million

colors) is recommended for optimal display of scanned

pictures.

PC Systems

• An IBM PC computer or compatible with at least a 300-MHz

Pentium processor and 128 megabytes (MB) of RAM.

(RAM equal to the typical image ﬁle size is recommended.)

• Microsoft Windows 95, 98 or NT (version 4 or later)

operating system.

• 400 MB of free disk space.

• An ASPI-compliant SCSI adapter with the appropriate

Windows 95, 98 or NT drivers.

• A video adapter and monitor capable of displaying

thousands of colors, minimum. 24-bit color (16.7 million

colors) is recommended for optimal display of scanned

pictures.

English 4

1 Unpack the Box

Make sure you have all the following components. Contact your

dealer if any is missing or damaged.

Scanner

Power cable (several provided for various power sources)

This manual

SCSI cable (25-pin to 50-pin)

Film carrier for 4x5 ﬁlm

Adapter for 120 ﬁlm, 2 1/4 x 2 1/4 in.

Adapter for single 35mm slide

Adapter for 120 ﬁlm, 2 1/4 x 2 3/4 in.

Four-slide ﬁlm carrier

35mm slide spacer (not shown)

Two magnets for 120 ﬁlm (not shown)

The PolaColor Insight Software CD (not shown) containing:

• PolaColor Insight software for Windows 95, 98, and NT

• PolaColor Insight software for Power MAC and

PowerPC systems and an Adobe Photoshop plug-in

• Online user’s guide

Warning:

Nothing inside the scanner is user serviceable.

Do not disassemble the scanner. Doing so could result

in severe electrical shock and damage to the scanner.

This action may also void your warranty. Contact

Polaroid Technical Support or your dealer if the

scanner is malfunctioning. (To contact Polaroid from

within the U.S.A., call

1-800-432-5355

. Outside the

U.S.A., see

Getting assistance

in the online user’s

guide or visit

www.polaroid.com

on the World

Wide Web.)

abcd

efg

English 5

2 Position the Scanner

Place the scanner on a ﬂat, stable surface, free of vibration. Leave

at least 2 inches (50mm) of space around all sides and the top of

the scanner for adequate ventilation, and leave room at the back

to reach the power switch on the rear panel.

Caution:

As with any highly sensitive optical equipment, vibra-

tions or bumping the scanner during use may result in

picture defects. Locate the unit where it will not be dis-

turbed during use.

3 Install the Software

Turn the computer on.

Close any applications that may be running.

Insert the Polaroid PolaColor Insight CD into the drive.

Remove the CD from the drive.

Power Mac or PowerPC Windows 95, 98 or NT

Select Polaroid

PolaColor Insight

Installer.

Follow the instruc-

tions on the screen.

If you want to install

the Photoshop plug-in,

double-click the Plug

In Installer in the

PolaColor Insight

folder and follow the

instructions on the

screen.

Wait for the install

program to start.

If it does not, select

Run from the Start

menu. Click Browse

and select

SETUP.EXE on the

CD-ROM. Click OK.

Follow the instruc-

tions on the screen.

English 6

4 Connect the Scanner to

the Computer

The SprintScan 45 Ultra requires a SCSI host adapter in your

computer. If your computer does not have an adapter, you must

install one (see page 17). If your computer is a PC-compatible

with a SCSI adapter, but the adapter is connected to a hard drive

or CD-ROM drive, installing a second adapter is recommended.

Set the Scanner SCSI Address

Each device connected to a SCSI host adapter must have a unique

address from 0-6. To assure a unique address for the scanner,

determine the addresses of any other SCSI devices.

Make sure the scanner is turned off and set the address switch

(

on page 7) to a value not used by any other device.

Note:

The address is preset to 4. Do not change it unless another

device is using 4. Other addresses typically available are 2,

5, and 6.

Power Mac or PowerPC Windows 95, 98 or NT

Run the Apple System

Proﬁler program, usually

on the Apple menu. If not,

it may be available from

www.apple.com/

swupdates.

Click Devices and

Volumes to view the SCSI

device addresses.

Look at the address switch

on each SCSI device

connected to your system. If

necessary, see the

instructions provided with

the devices.

English 7

Connect the SCSI Cables

Place the scanner at the end of the SCSI chain or between the

computer and other SCSI devices as shown in the following

diagrams. Use the shortest possible cables.

Note:

Turn the computer, scanner and all other SCSI devices off

before connecting or disconnecting any cables. Do not

connect the scanner to the parallel connector on your

computer. Doing so could damage the scanner or

computer.

SCSI address switch

SCSI termination switch

Power switch

SCSI connectors (25, 50)

Power connector

bc d e

50 pins

Scanner

(termination on)

25 pins

Computer

English 8

You may need additional cables or adapters to connect the

scanner. Your cable must have a 50-pin Centronics M or DB-25

M connector at one end for attachment to the scanner, and the

cable should be as short as possible. To determine the connector

you need for attachment to your SCSI adapter, refer to

instructions with the adapter.

Set Termination

Terminate the scanner and all other SCSI devices as shown in the

appropriate cabling diagram to the left or on page 7. The last

device in the SCSI chain must be terminated (or termination on),

while all other devices must be unterminated (or termination off).

Set scanner termination with the termination switch (

page 7). On = terminated, Off = unterminated.

Termination instructions for your other SCSI devices are

provided with the devices.

Scanner

(termination on)

pins

Computer

pins

Other SCSI device

(unterminated)

Other SCSI device

(terminated)

Computer

pins

Scanner

(termination off)

English 9

5 Connect the Scanner to

AC Power and Turn On

Connect the power cord to the power connector (

Turn the scanner power switch on.

Check the lights. The green light indicates power on. The

yellow light blinks while the scanner initializes, and it

remains steady when the scanner is ready. (The yellow light

also blinks during scanning.)

Turn the computer on.

Wait for the system to install the scanner driver and display

the normal desktop.

Power switch

Power connector

English 10

6 Loading the Film Carriers

The Four-Slide Film Carrier

With the text facing up and the hinge at the top, open the

carrier ﬂat as shown.

Place up to four mounted 35mm slides in the spaces pro-

vided. Be sure the slide mounts ﬁt properly in the recessed

areas. The images should be right-side up and right-reading

as you do so. The emulsion side will face down.

Close the carrier carefully.

The 4x5 Carrier (for 4x5 ﬁlm)

To unlock the carrier, squeeze the two halves of the carrier

together at the bottom edge (near the locking knob) with one

hand while turning the locking knob in either direction, until

the slot in the knob points to UNLOCK.

English 11

Open the carrier ﬂat. Insert a 4x5 chrome or negative so that

the left edge is against the positioning pins. Position the ﬁlm

so the image is right-reading and right-side up (emulsion-

side down).

Note:

The emulsion side is the dull side.

Close the carrier. Squeeze the carrier at the bottom edge and

turn the knob to lock it.

The 120 Film Adapters

(for 2 1/4 x 21/4 and 2 1/4 x 2 3/4 in. ﬁlm)

Open the 4x5 carrier as described previously.

Locate the appropriate adapter for your image. One is

designed for 2 1/4 x 2 3/4 in. images, and one is for 2 1/4 x

in. square images.

Note:

The frame of ﬁlm must be cut from the ﬁlm strip in

order to be scanned.

Orient the adapter so that the words THIS SIDE UP (on the

adapter) face up, and the notches are at the left edge. Place

the unmounted ﬁlm over the opening, within the raised

ridges of the adapter. Position the ﬁlm so the image is right-

reading and right-side up.

Pins

Table des matières

Autres manuels Polaroid Scanner

Polaroid

Polaroid CS-600 Manuel utilisateur

Polaroid

Polaroid SS35 LE Mode d'emploi

Polaroid

Polaroid SprintScan 4000 Manuel utilisateur

Polaroid

Polaroid SprintScan SS35 Mode d'emploi

Polaroid

Polaroid Sprint Scan 45i Manuel d'utilisation et d'entretien

Polaroid

Polaroid SprintScan 45 Manuel utilisateur

Polaroid

Polaroid i-Zone Webster Manuel utilisateur

Polaroid

Polaroid SprintScan 4000 Instructions générales

Polaroid

Polaroid SprintScan 120 Manuel utilisateur

Polaroid

Polaroid SprintScan 120 Manuel d'utilisation et d'entretien

Manuels Scanner populaires d'autres marques

Plustek

Plustek Scanner Manuel utilisateur

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuel utilisateur

Renkforce

Renkforce DS100-5M Manuel utilisateur

Image Access

Image Access WideTEK A2 Manuel utilisateur

Canon

Canon imageFORMULA CR-120N Manuel utilisateur

Fujitsu

Fujitsu FI-4860C2 Manuel utilisateur

GeoSlam

GeoSlam ZEB Horizon Instructions d'installation

Kodak

Kodak i5800 Scanner Manuel utilisateur

Kodak

Kodak i7300 Manuel utilisateur

Revopoint

Revopoint POP Manuel utilisateur

Fujitsu

Fujitsu fi-4860C Manuel utilisateur

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuel utilisateur

Faselase

Faselase F6 Manuel utilisateur

Fujitsu

Fujitsu CardMinder Manuel utilisateur

Uniden

Uniden BC340CRS Manuel utilisateur

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuel utilisateur

Mustek

Mustek PageExpress 4800 Pro Manuel utilisateur

Optex

Optex 750830 Manuel utilisateur