PNI Hunting 350C Manuel utilisateur
PNI Hunting 350C
3G Hunting Camera / 3G ловна камера / 3G-Jagdkamera / Cámara de caza
3G / Caméra de chasse 3G / 3G vadászkamera / Telecamera da caccia 3G / 3G
jachtcamera / Kamera myśliwska 3G / Camera vanatoare 3G
EN User manual ......................................................... 3
BG Ръководство за употреба ............................. 27
DE Benutzerhandbuch .............................................. 53
ES Manual de usuario ............................................... 79
FR Manuel utilisateur ............................................... 104
HU Használati utasítás .............................................. 130
IT Manuale utente .................................................. 155
NL Handleiding ........................................................ 179
PL Instrukcja obsługi ............................................... 204
RO Manual de utilizare ............................................. 228
EN
3
User manual
TRAILCAMERA APP FOR ANDROID AND IOS
Scan the QR code below to download TrailCamera application to your smartphone:
Android iOS
DEVICE DESCRIPTION
Antenna connector
28 IR LED
Indicator light / Light sensor (day/night)
PIR sensor
Lens
30 IR LED
Batteries compartmentMicro USB
SD card slot Power
EN
4User manual
Antenna connector
LCD screen
Menu key
Browse menu arrows
ON/OFF/SETUP switch
Battery compartment
OK key
GETTING CAMERA READY
1. Unplug the camera and insert 12 alkaline
or Ni-MH AA batteries respecting
polarity.
Note: For longer battery life, we recommend
that you set in the menu the type of battery
you are using (Alkaline or Ni-MH)
2. Insert the SD card in the slot
in the direction indicated on the
bottom of the camera.
Note: We recommend using a 32GB
card.
3. Insert the SIM into the slot
on the side of the camera.
COMPATIBLE ACCESSORIES
Gel battery
12V/18Ah Battery power
cable for hunting
cameras
EN
5
User manual
CAMERA CONFIGURATION
1. Camera startup
Turn on the camera by changing the ON/SETUP/OFF switch to the ON position.
Under this mode, the camera enters motion detection/monitoring mode. The screen
will not light up. If the camera’s default settings meet your needs, then you can
mount the camera directly to the intended location.
2. Configure camera settings
Move the ON/SETUP/OFF switch to the SETUP position. This mode allows you
to configure the camera as needed. The screen will light up. Press the MENU key
to enter the menu. Use the arrow keys to navigate through the menu and press OK
to confirm. Find the menu structure on page 7, and on page 12 the detailed menu.
Notes:
Read the manual and menu descriptions carefully to understand each setting.
Test each step and check how it works.
A setting that is not familiar to you can lead to a dierent and unknown way of working.
You can return to the factory settings and resume setup if the camera behaves dierently
after certain user settings.
After completing the settings, switch back to the ON position.
3. Connect to the network
When you switch to the SETUP position, the screen lights up and the camera
automatically searches for signal and checks for an SD card.
If only the signal bar appears on the screen, it means the device has automatically
connected to the network. Simply enter the phone number and e-mail address you
want to receive allarms on in case of motion detection.
If a pop-up message appears on the screen “SIM Auto Match failed…“ go to 3G -
SIM Auto Match. Select Manual. The select 3G-Manual setup menu and add the
APN of the GSM operator. The camera will automatically connect to the network
after rebooting.
Nota: The camera can send images to 2 phones and 2 email addresses. By default, the
camera sends images to the phone via MMS, and photo/video by email via SMTP (data).
If you want to change the default settings, go to the menu.
WARNING: Most GSM SIM cards (subscription or prepaid) have MMS disabled. The
EN
6User manual
MMS function brings additional costs. Check the costs for the MMS service and ask for
activation and settings to be made by your mobile operator if you want to use this feature.
VERY IMPORTANT WARNINGS
• If you want to receive photo only by e-mail, disable MMS and FTP, and do not
enter phone numbers in the “Send To” menu.
• If you want to use the MMS function, make sure that you have the active MMS
function on the SIM card and that you have previously tested the function in a
phone (meaning, you can send and receive an MMS with this card).
• Test your SIM card in a phone and make sure you have Internet (mobile data),
SMS (for communicating with the Trail Camera smartphone application), credit
and MMS enabled.
• The camera will automatically enter the 3G and MMS settings (only if you use
the function) when the SIM card is inserted. If the message “SIM Automatch
failed” appears on the screen, enter the settings manually, switch the “SIM Auto
Match” mode to “Manual”, then enter the 3G and/or MMS settings (if you use
the function);
• For emails, enter your email address in “Send to” - “Email” (up to 2 email
addresses can be set).
• For MMS, enter your mobile phone numbers in “Send to” - “Phone” (up to
2phone numbers can be set) (only if you use the function)
Note: For detailed menu settings, refer to the instructions in the menu options chapter
• After you have finished all the settings, press the “Menu” button to return to the
home screen, then move the ON/SETUP/OFF switch to the ON position; the
LED will turn o and the camera enters the motion detection mode.
* In motion detection mode, the camera will automatically take photos and videos
and send photos to your mobile phone or email every time it detecs motion.
TESTING EMAIL SENDING
After you have passed the previous steps (SIM card verification, signal, 3G settings
auto-configuration) just do the following:
1. Disable MMS and FTP from the camera menu; The SMTP function must be set to
Default (the default e-mail server of the camera).
2. Enter your email address that you want to receive the picture on in the “Send To”
3. Do not make other settings changes in the camera.
4. Press the Menu button until you exit the menu, and you will have the image taken
EN
7
User manual
from the camera on the screen.
5. Press the OK button to make and send a test picture.
6. The status messages for the picture will appear on the screen: “Send SMTP”/“Send
Failed” and if applicable an error code.
7. If the message is “Send successfully” check your email address, including the
SPAM folder.
8. If the message is error, check again that the settings made are correct as indicated
above.
FAST CONFIGURATION WITH TRAILCAMERA APP
You can send basic settings to the camera, directly from the TrailCamera mobile
application, to quickly configure it, or to receive emails. Just enter a SIM card with
SMS, active Internet and no PIN (tested in a phone in advance) and turn on the
camera (the switch is on ON position) and check as indicated above for a signal in
the camera.
- Add in the app the phone number of the SIM inside the camera.
- Copy the settings in the image below and only modify your phone number and
email address with your own.
- Send the settings to the camera by pressing the Send button.
- The camera will respond with an SMS “SMS commands executed successfully!”
- Give the command “Get a picture” from the application and you will receive the
same SMS and an email with the photo taken by the camera.
- If it does not work, it means the product does not have the GSM signal, the Internet
or the correct settings made. Check the settings again and remove the camera in
the open field where you have at least 2 signal lines. Please also carefully check the
camera settings.
EN
8User manual
SET UP THE HUNTING CAMERA TO USE A GMAIL ACCOUNT
• In your Gmail account, access the “Security” menu and activate the 2FA option.
• The first time you will be asked for confirmation by code received via SMS, then
pass 2FA on Google Authenticator (optional).
• After activating 2FA, the ‘App passwords’ option appears.
• There we select “Mail” in the app, then in Device “Other” and enter a name.
EN
9
User manual
• A password will be generated that can be used instead of the email account
password for authentication from a device such as a camera or printer.
EN
10 User manual
MENU
Note: The default settings in the camera are marked in red.
Cam PIR 3G Other
Cam ID/Nr
OFF/ON
Cam Mode
Photo/Video/PIC+Video
Image size
5MP/8MP/12MP
Night Mode
Balanced
Min. Blur
Max Range
Multi-shot
1P/2P/3P/4P/5P
Video Size
1080P/720P/VGA
Video Length
05~59sec.
Sensitivity
High/Middle/Low
Time Lapse
OFF/ON
MMS
ON/OFF
Stamp
OFF/ON
Battery Type
Alkaline/NI-MH
Frequency
50Hz/60Hz
SD Cycle
OFF/ON
Reset
Yes/No
Password
OFF/ON
About
SMTP
Default/Manual/OFF
FTP
ON/OFF
Send to
Phone/Email
SMTP/FTP Pic size
640x480/1920x1440
Max Num/Day
Unlimited/01~99
SMS Ctrl
By trigger/All the time
Daily Report
OFF/ON
Timer
OFF/ON
SIM Auto Match
Auto/Manual
Manual Setup
MMS/3G
Language
English...
Date/Time
Manual
Delay
OFF/ON
SIM PIN
ON/OFF
3G Switch
On/OFF
LED
All/Part
Autres manuels pour Hunting 350C
1
Table des matières
Langues :
Autres manuels PNI Appareil photo numérique
PNI
PNI Explorer M1 Manuel utilisateur
PNI
PNI SafeHome PT945M Manuel utilisateur
PNI
PNI HUNTING 2C Manuel utilisateur
PNI
PNI IP60 2MP 4G PTZ SOLAR Manuel utilisateur
PNI
PNI IP390T Manuel utilisateur
PNI
PNI SafeHome PT945M Manuel utilisateur
PNI
PNI IP660MP Manuel utilisateur
PNI
PNI House WiFi 400 Manuel utilisateur
PNI
PNI Escort C100 Manuel utilisateur
PNI
PNI SmartHome SM460 Manuel utilisateur
