Plus 5032 Manuel utilisateur
8-Port Synchronization Distribution Panel
Model Number 5032
User Manual
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
2
Contents
Safety Information .................................................................................................................................................. 3
Overview ................................................................................................................................................................. 4
Specifications .......................................................................................................................................................... 5
Mounting................................................................................................................................................................. 6
Standalone SDP Installation.................................................................................................................................... 7
Standalone SDP Installation, Continued ............................................................................................................. 8
Multiple SDP Installation ........................................................................................................................................ 9
Multiple SDP Installation, Continued ................................................................................................................ 10
Regulatory & Legal Information............................................................................................................................ 11
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
3
Safety Information
Read and follow all instructions before using the SDP.
Only plug the SDP into approved power outlets.
Unplug the SDP before removing cover.
Unplug the power cord when changing fuses.
Do not use the SDP with a damaged cord.
Do not use SDP near water.
Do not use the SDP near heat sources.
Do not install in environments that exceed temperature and humidity requirements.
Do not cover the ventilation ports on the SDP.
Do not use the SDP if it has been dropped.
Only connect PLUS sensors to the sensor ports.
Attach the rubber feet to the device.
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
4
Overview
The PLUS Location 8-Port SDP (Synchronization Distribution Panel) provides power, timing synchronization,
and Ethernet connectivity to a network of PLUS sensors.
The SDP includes eight sensor ports. Each sensor port can provide power for up to three sensors, 24 sensors
total. Each senor port can also provide timing synchronization for up to six sensors, 48 sensors total.
Each of the SDP’s sensor ports connect to the network port, allowing sensors linked to the SDP to transmit
information to a computer. The network connection also enables the 8-Port SDP to match the timing signal of
a primary SDP, so all SDPs are synchronized.
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
5
Specifications
Dimensions
(HxWxD)
With rubber feet: 2.16 x 8.62 x 16.0 inches (43.8 x 219 x 406.4 millimeters)
Without rubber feet: 1.72 x 8.62 x 16.0 inches (43.8 x 219 x 406.4 millimeters)
Weight
4.1 pounds (1.86 kg)
Mounting
19-inch rack mount, table top, or wall/column mount
Power Supply
Input: 100 –240 VAC, 50/60 Hz
Line Harmonic Emissions: Meets EN61000-3-2, Class A, B, C, D
Safety: Thermal and power overload protection
Input Power
9W (no sensor load)
140W (24 sensor load)
AC Power Connection
IEC C14 power receptacle (mating power cord should have IEC 320-C13 plug
with approved regional connector at other end of cord)
Fuse
250V IEC Slow 5X20mm 4A; Littelfuse 0218004.HXP or Equivalent
Temperature
Operating: -20⁰C to +50⁰C
Storage: -40⁰C to +60⁰C
Relative Humidity
Up to 95% non-condensing
I/O Ports
8 sensor ports; 1 network/sync regeneration port; all 10/100 BaseTx Ethernet
compatible
Sensor Port Capacity
Up to 3 sensors per port (24 total) powered by SDP; maximum of 6 sensors per
port (48 total) with auxiliary power
Max Cable Length
100 meters maximum from SDP to last sensor in chain
Certifications
cTUVus certification per
oCAN/CSA C22.2.60950-1: 2011
oUL 60950-1: 2011 (2nd Ed.)
CB Scheme per IEC 60950-1:2005 +A1:2009
LVD Compliance per EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 +
AC:2012
FCC Part 15 (Class A)
RoHS
Warranty
1 year
Part Number
5032
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
6
Mounting
Rack Mount the SDP
For rack mounting, use two brackets in orientation A with an adapter.
Wall Mount the SDP
For wall mounting, use all four brackets in orientation B.
Orientation A
Orientation B
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
7
Standalone SDP Installation
Installation
Connect sensors and the server to the SDP as shown in the diagram. Connections between the SDP and a
sensor, or between any two sensors, must use CAT5E Shielded Twisted Pair (STP) 24 AWG cable.
Compatible sensor models
1000RL1
3002RNC
4001RNC
102RK01
The diagram above shows a typical standalone installation of an 8-Port SDP with a full load of sensors.
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
8
Standalone SDP Installation, Continued
Maximum Cable Length
The maximum cable length for each sensor port to the farthest sensor in the chain in 100 meters. Likewise, the
maximum distance from the SDP to a networked computer is 100 meters.
Powering on the SDP
Connect the SDP to power outlet and turn on power switch on the rear panel. The PWR and SYNC LEDs will
light up green. The EXT LED should be off.
LEDs
If the SYNC LED does not turn back to green after 10 seconds, then either one of the SDP units has a defect or
the interconnect cable is defective.
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
9
Multiple SDP Installation
The diagram above shows primary and secondary SDPs installed with sensors.
PLUS Location Systems
6767 Old Madison Pike NW, Suite 310
Huntsville, AL 35806
(p) 1.256.217.4072
(f) 1.256.964.7614
www.pluslocation.com
10
Multiple SDP Installation, Continued
Installation
Connect sensors and the server to the SDP as shown in the diagram. However, one port on the primary SDP
must be connected to the NETWORK port on the secondary SDP.
Power each SDP. After at least 10 seconds, check LEDs on the secondary SDP:
EXT light should be green
SYNC light should be green
If the LEDs are not on, solid green, check for cable faults (including excessive cable length).
Table des matières
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
