Copyright Planika Sp. z o.o. www.planikafires.com 3
I. Safety
Fire Line Automatic is a decorative appliance with real flames that is wh in order to use the
device properl and safel and in order to keep the warrant , the following safet rules
should be observed. Fire Line Automatic is not a heating device.
• The device should be installed according to the rules given in the installation manual.
• While working, the device emits heat, water vapour and carbon dioxide, therefore it is
necessar to provide proper cubic capacit of the room and proper ventilation of the interior.
• During the device starting-up sequence, the characteristic smell of the liquid used in the device
or the recommended FANOLA® liquid ma be perceptible.
• It is obligator to have a carbon-dioxide or dr chemical extinguisher placed nearb the device.
• The device that is switched on must not be moved. Wait for complete fuel burn-out, disconnect
the power suppl and cool down the elements before moving the device.
• The device should not be left without adult supervision.
• Prevent handling of the device b persons not trained.
• Do not attempt to make changes or repairs to the construction of the device on our own.
Repairs can be made onl b a person trained to service the device.
• Do not pour FANOLA liquid to a furnace, as it ma cause damage of the device and cause fire.
Pouring FANOLA liquid to a burning furnace ma cause a sudden ignition and can cause fire,
burns and a risk to life.
• Do not heat the FANOLA liquid before starting-up the device.
• Do not start up the device if the FANOLA liquid spilled out from the container.
• Do not cover the working device as it ma cause fire.
• Keep the device and fuel awa from children, pets and unauthorized persons.
• FANOLA liquid is not suitable for consumption. Avoid contact with skin and e es.
• Do not operate b the filler when the device is running.
• Do not tamper with the elements inside the furnace bod at the risk of burns, damage to the
device or fire.
• Some elements of the device heat up to high temperatures. Do not touch the area of the
furnace of the device as it ma cause burns.
• Do not place an decorative elements on the burner’s surface.
• WARNING! The glowing coil temperature heats up to 1300 °C. Touching the device while it is
turned on ma cause burns.
• WARNING! Prior to moving the appliance burn the fuel out and move the appliance slowly,
in the hori ontal position, avoiding shaking. There is always some fuel left inside the device
and if spilled the sensors might get wet. If that happens the appliance will not work until the
liquid evaporates.
• WARNING! The first run can be made only after proper installation of the device and reading
the manual instructions!
