Planet LRP-422CST Manuel utilisateur
Industrial 4-port Coax + 2-port 10/100/1000T
+ 2-port 100/1000X SFP
Long Reach PoE over Coaxial Managed Switch
LRP-422CST
Quick Installation Guide
Table of Contents
1. Package Contents ....................................................................................... 3
2. Requirements ............................................................................................. 4
3. Wiring the Power Inputs.............................................................................. 5
4. Terminal Setup ........................................................................................... 6
5. Logon to the Console .................................................................................. 7
6. ConguringIPAddressviatheConsole ........................................................ 8
7. SavingtheCongurationviatheConsole.....................................................10
8. Starting Web Management .........................................................................11
9. Starting Long Reach PoE Communication .....................................................14
10.SavingCongurationviatheWeb...............................................................18
11.RecoveringBacktoDefaultConguration ....................................................19
12. Customer Support.....................................................................................20
3
1. Package Contents
Thankyou for purchasingPLANET Industrial4-port Coax+2-port 10/100/1000T+
2-port100/1000XSFPLongReachPoEoverCoaxialManagedSwitch.
“LRP Managed Switch” is used as an alternative name in this Quick Installation
Guide.
Open the box of the LRP Managed Switch and carefully unpack it. The box should
containthefollowingitems:
zTheLRPManagedSwitchx1
zQuickInstallationGuidex1
zRS232toRJ45ConsoleCablex1
zSFPDustCapx2
zBNCFemaleDustCapx4
zWarningStickerx4
zDIN-railKitx1
zWallMountingKitx1
If any item is found missing or damaged, please contact your local reseller for
replacement.
4
2. Requirements
Workstations running Windows XP/2003/Vista/7/8/2008, MAC OS X or later,
Linux,UNIX,orotherplatformsarecompatiblewithTCP/IPprotocols.
WorkstationsareinstalledwithEthernetNIC(NetworkInterfaceCard)
SerialPortConnection(Terminal)
The above Workstations come with COM Port (DB9) or USB-to-RS232
converter.
The above Workstations have been installed with terminal emulator, such as
HyperTerminalincludedinWindowsXP/2003.
Serial cable -- one end is attached to the RS232 serial port, while the other
endtotheconsoleportoftheLRPManagedSwitch.
Ethernet Port Connection
Networkcables--Usestandardnetwork(UTP)cableswithRJ45connectors.
The above PC is installed with Web browser and JAVA runtime environment
plug-in.
Note
It is recommended to use Internet Explore 8.0 or above to access
theLRP Managed Switch.Ifthe Web interface of theLRP Managed
Switch is not accessible, please turn off the anti-virus software or
firewallandthentryitagain.
5
3. Wiring the Power Inputs
The Upper Panel of the LRP Managed Switch indicates a DC inlet power socket
and consists of one terminal block connector within 6 contacts. Please follow the
steps below to insert the power wire.
1.Insert positive/negative DC power wires into contacts 1 and 2 for Power 1 or 5,
and6forPower2.
LRP-422CST: DC 48~56V
Input DC 48-56V
DC1 DC2
Fault
Figure 3-1: LRP-422CST Upper Panel
2.Tightenthewire-clampscrewsforpreventingthewiresfromloosening.
1 2 3 4 5 6
V1+ V1- V2+ V2-
Power 1 Power 2
Positive (+) Pin Negative (-) Pin
LRP-422CST Pin 1/5 Pin 2/6
Note
The wire gauge for the terminal block should be in the range from
12to24AWG.
6
4. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to the RJ45 type of the console port of the LRP Managed
Switch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 4-1: LRP Managed Switch Console Connectivity
A terminal program is required to make the software connection to the LRP
ManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
zBaud :115200
zDatabits :8
zParity :None
zStopbits :1
zFlowcontrol :None
Figure 4-2:COMPortConguration
7
5. Logon to the Console
Once the terminal is connected to the device, power on the LRP Managed Switch,
and the terminal will display “running testing procedures”. Then, the following
message asks to log-in user name and password. The factory default user name
andpasswordareshownasfollows,andtheloginscreeninFigure5-1appears.
Username:admin
Password:admin
Figure 5-1: LRP Managed Switch Console Login Screen
The user can now enter commands to manage the LRP Managed Switch. For a
detaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1.For security reason, please change and memorize the new
passwordafterthisfirstsetup.
2.Only accept command in lowercase letter under console
interface.
8
6.ConguringIPAddressviatheConsole
TheLRPManagedSwitchisshippedwithdefaultIPaddressasfollows:
IPAddress:192.168.0.100
SubnetMask:255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
usetheproceduresasfollows:
Show the current IP address
1.Atthe“LRP-series#”prompt,enter“show ip”.
2.Thescreendisplays thecurrentIP address,SubnetMask and Gatewayasshown
inFigure6-1.
Figure 6-1: IP Information Screen
9
ConguringIPaddress
3.Atthe“LRP-series#”prompt,enter“congure”.
4.Atthe“LRP-series (cong)#”prompt,enterthefollowingcommandandpress
<Enter>asshowninFigure6-2.
LRP-series(cong)# ip address 192.168.1.100 mask 255.255.255.0
LRP-series(cong)# ip default-gateway 192.168.1.254
ThepreviouscommandwouldapplythefollowingsettingsfortheSwitch.
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 6-2: IP Address Screen
5.RepeatStep1tocheckiftheIPaddressischanged.
If the IP is successfully congured, the LRP Managed Switch will apply the new IP
addresssettingimmediately.YoucanaccesstheWebinterfaceoftheLRP Managed
SwitchthroughthenewIPaddress.
Note
If you are not familiar with console command or the related
parameter, enter “?” anytime in console to get the help
description.
10
7.SavingtheCongurationviatheConsole
In the switch, the running conguration le stores in the RAM. In the current
version, the running conguration sequence running-cong can be saved from the
RAMto FLASHby copying the running-cong startup-cong command,so that
the running conguration sequence becomes the startup conguration le, which is
calledcongurationsave.
1.At the “LRP-series#” prompt, enter “copy running-cong startup-cong”
asshowninFigure7-1.
Figure 7-1: The Conguration Screen
Table des matières
Autres manuels Planet Changer
Planet
Planet FSD-604HP Manuel utilisateur
Planet
Planet WSW-2620 Manuel utilisateur
Planet
Planet POE-1200 Manuel utilisateur
Planet
Planet GSD-1020S Manuel utilisateur
Planet
Planet GSW-1601 Manuel utilisateur
Planet
Planet GSW-1602SF Manuel utilisateur
Planet
Planet FGSW-008 Manuel utilisateur
Planet
Planet FSD-504PE Manuel utilisateur
Planet
Planet GS-6320 Series Manuel utilisateur
Planet
Planet KVM-1600 Manuel utilisateur
Planet
Planet GSD-802PS Manuel utilisateur
Planet
Planet XGSW-28040HP Manuel utilisateur
Planet
Planet HPOE-460 Manuel utilisateur
Planet
Planet KVM-200 Manuel utilisateur
Planet
Planet FGSW-2022VHP Manuel utilisateur
Planet
Planet FSD-805S15 Manuel utilisateur
Planet
Planet SGS-6341 Series Instructions d'installation
Planet
Planet GSD-Series Manuel utilisateur
Planet
Planet IGS-5225 Series Manuel utilisateur
Planet
Planet FGSW-4840S Manuel utilisateur
