Planet PL-501-EU Manuel utilisateur

200Mbps Powerline Ethernet Bridge

PL-501-EU/US/UK

Quick Installation Guide

Table of Contents

Important Safety Instructions ................................................ 3

Package Content................................................................... 4

Package Details ................................................................ 4

LED Denition .............................................................. 5

Button Denition .......................................................... 5

Planning your Powerline Network ................................... 6

Connecting Powerline Ethernet Bridge..................................... 7

Hardware Installation ........................................................ 7

Utility Installation for Windows........................................... 7

Further Conguration ........................................................ 8

Important Safety Instructions

This product is intended for connection to the AC power line.

The following pre-cautions should be taken when using this

product:

Please read all instructions before installing and operating this

product.

Please follow all warnings and instructions marked on the

product.

Do not operate this product near water.

This product should never be place near or over radiator, or

heat register.

This product relies on a building’s electrical installation for

short-circuit (over current) protection.

Ensure that a fuse or circuit breaker is used on the phase

conductors (all current-carrying conductors).

Do not allow anything to reset on the product interconnect

cords.

Do not locate this product where people may walk on the

cords.

The power cord should be plugged directly into a specication

AC wall outlet.

Only a qualied technician should service this product. Opening

or removing covers may result in exposure to dangerous

voltage points or other risk.

Unplug this product from the wall outlet and refer the product

to qualied service personal for the following conditions:

1. When the interconnect cords are damaged or frayed.

2. If liquid has been spilled onto the product.

3. If the product has been exposed to rain or water.

4. If the product does not operate normally when the operating

instructions have been followed.

5. If the product exhibits a distinct change in performance.

Package Content

PL-501-EU/US/UK

n200Mbps Powerline Ethernet Bridge

nRJ-45 Cat.5 Cable

nUser Manual, Quick Installation Guide, and Utility CD-ROM

nQuick Installation Guide

If any of the above items are missing or damaged, contact your

local dealer for support.

Package Details

Outlook

LED Denition

LED Status Description

Power On Steady on indicate the Powerline device

connect to the power outlet

Ethernet

Blinking Blinking indicates the data are transferring

Steady on indicates the RJ-45 port has

correctly connected to the network card of

your PC or the Ethernet network

Data

Blinking Data transferring in bridge mode

On Connected the other HomePlug devices

Button Denition

Button Description

Reset Reset to factory default

Security

Press security button

during 1~3 seconds.

Join a another

HomePlugAV network

Press security button

more than 10 seconds

Set its security to

random value

Planning your Powerline Network

With a PL-501 and the other Powerline device installed, a

network can be created over residential powerline of your

house. PL-501 can be connected to Ethernet switch, hub,

and broadband router or directly connected to PC. If connect

directly to a PC, of course, the PC must be equipped with an

Ethernet card.

All the Powerline devices on the network must use the same

password to communicate each other. This password can be

congured through the Powerline Conguration utility that can

be found in the CD-ROM. The default password of PLANET

powerline devices is “HomePlugAV”. Thus, all the PLANET

powerline devices can communicate each other without prior

password conguration. Please refer to User’s Manual on detail

of installing and using Powerline Conguration utility.

Connecting Powerline Ethernet Bridge

Hardware Installation

Setp 1.

Connect one Powerline

Ethernet bridge to your

ADSL or Cable modem’s

Ethernet port.

Setp 2. Plug it into the nearest

power socket.

Setp 3.

Plug in the second

Powerline Ethernet

bridge next to your PC

and connect the Ethernet

ports.

Setp 4.

Internet access from any

power socket in your

home.

Utility Installation for Windows

The installation procedure for the Powerline Conguration utility

will vary depending on which operating system you are using on

your computer. The following procedure is for installation under

Windows XP. Installation on other operation system is similar.

1. Insert the CD into the CD-ROM drive to initiate the Autorun

program. Once completed, a menu screen will appear.

2. Click on the “Powerline Conguration Utility” hyperlink in

PL-501 eld to start the installation. If the menu screen is

not shown, you can start the installation as follows.

• Click on Start Menu/ Run.

• Enter “E:\Utility\setup.exe” in the appeared box, where

“E” is the letter of your CD-ROM drive.

• Click on “OK” button.

3. The utility will be installed into your computer

and a new icon called “PowerPacket Utility”

will appear on your desktop.

Note

This utility is only for Windows 2000, 2003, XP,

and Vista.

Further Conguration

If you want to congure more detail settings of PL-501, please

refer to user’s manual on the bundled CD.

If you have any difculty on resolving the problem while

installing or using the PL-501, please contact the dealer where

you purchased this product or you can contact PLANET directly

at the following email address: support@planet.com.tw

Autres manuels pour PL-501-EU

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Planet Routeur réseau

Planet

Planet AND-4102 Manuel utilisateur

Planet

Planet ADE-3400v4 Manuel utilisateur

Planet

Planet VDR-301n Manuel utilisateur

Planet

Planet EH-2400 Manuel utilisateur

Planet

Planet GSW-1600HP Manuel utilisateur

Planet

Planet FNSW-2400PS Manuel utilisateur

Planet

Planet ADSL 2/2+ VPN Firewall Router ADE-4300A/B Manuel utilisateur

Planet

Planet VDR-300NU Manuel utilisateur

Planet

Planet IGS-801M Manuel utilisateur

Planet

Planet GSW-1602SF Manuel utilisateur

Planet

Planet FGSW-2620 Manuel utilisateur

Planet

Planet WRT-403 Manuel utilisateur

Planet

Planet WDAP-C7210E Manuel utilisateur

Planet

Planet WGSW-2620PV Manuel utilisateur

Planet

Planet FNSW-1600S Manuel utilisateur

Planet

Planet ADE-4400 Manuel utilisateur

Planet

Planet Powerline Ethernet Bridge PL-104E Manuel utilisateur

Planet

Planet GS-4210-16T2S Manuel utilisateur

Planet

Planet G.SHDSL.bis Bridge Router GRT-504 Manuel utilisateur

Planet

Planet GRT-402 Manuel utilisateur

Planet

Planet WGSW-404 Manuel utilisateur

Planet

Planet ADE-3410 Manuel utilisateur

Planet

Planet WNRT-320GS Manuel utilisateur

Planet

Planet Enterprise WiFi System Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité