Planar Profile PRX Manuel utilisateur
Page | 1
Planar Profile Mounting System Installation Guide
008-0217-00A
Installation Guide
Planar®ProfileTM Mounting System for
Planar®UltraResTM X Series Displays
PRX
PRX75P
For Models:
URX75
URX75-ERO
URX75-ERO-T
URX85
URX85-ERO
URX85-ERO-T
URX100
URX100-ERO
URX100-ERO-T
2
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 2
Copyright © January 2021 by Planar Systems, Inc.
All rights reserved.
This document may not be copied in any form without permission from Planar. Information in
this document is subject to change without notice.
Trademark Credits
Windows™ is a trademark of Microsoft Corp.
All other companies are trademarks or registered trademarks of their respective companies.
Disclaimer
The information contained in this document is subject to change without notice. Planar Systems,
Inc. makes no warranty of any kind with regard to this material. While every precaution has
been taken in the preparation of this manual, the Company shall not be liable for errors or
omissions contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material.
Warranty and Service Plans
Planar warranty and service plans will help you maximize your investment by providing great
support, display uptime, and performance optimization. From post-sale technical support, to a
full suite of depot services, our services are performed by trained employees. When you
purchase a Planar product, you get more than a display; you get the service and support you
need to maximize your investment. To find the latest warranty and service information regarding
your Planar product, please visit http://www.planar.com/support
RoHS Compliance Statement
The Planar Profile Mounting System is fully RoHS compliant.
Part Number: 008-0217-00A
3
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 3
Table of Contents
Unpacking and Checking Package Contents .............................................................4
Installing the Planar Profile Mounting System ...........................................................5
Page | 4
Planar Profile Mounting System Installation Guide
008-0217-00A
Unpacking and Checking
Package Contents
Part
Description
Number
Picture
Planar
UltraRes X
Profile
Mount
Brackets
For hanging of Planar
UltraRes X products.
2
Note:
75” portrait
products
come with
only a single
mount
bracket.
Planar
UltraRes X
Service
Brackets
For placing a Planar
UltraRes X product in
service mode and locking
the panel in place when
installed.
2
Planar
UltraRes X
Profile
Mount Install
Template
For use when installing
Planar UltraRes X Profile
Mounts.
1
Planar
Profile
Mount
Installation
Guide
1
5
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 5
Installing the Planar Profile
Mounting System
For Planar Profile kits, a template has been supplied in the kit to simplify installation of the
Planar Profile components. If the template has been misplaced or lost, refer to the product
outline drawing for pertinent dimensions on the location of the Planar Profile mount component
locations. The following steps describe the use of the template to locate components.
Note: The mounting instructions below show a 75” landscape display; however, any size is
similar in procedure.
Determine and mark a vertical and horizontal line of the center display of the unit. For
mount location verification, it is optional to continue the line or mark the left and right most
edge of the display as well as the top.
6
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 6
Using the dimensions on the template for the model being installed, mark the location of
the upper-left mount position.
Install the left mount as indicated. The marked position is the location of the center hole on
the mount.
7
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 7
Level and install the main support screws. At minimum, two pieces of mounting hardware
must be used on a single hanging mount component.
Note: When mounting, it is best practice to install hardware on either side of the hook to
distribute the load both vertically and horizontally. Failure to do this may result in the panel
flexing outward from the wall.
Place the opening in the template over the hook of the installed mount so it is resting
against the back of the mount, level, and slightly pull to the right to find the labeled hole
position for the model and orientation of the display being mounted. Mark this location on
the structure.
Note: The “V” notch in the template labeled for the model being installed can be used to
verify the center marks made in step 1 are correct. A slight variation in this location is okay
due to being able to slightly move the display horizontally once installed.
8
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 8
Remove the template and install the right mount in the location marked. The marked
position is again the location of the center hole on the mount.
Level and install the main support screws. At minimum, two pieces of mounting hardware
must be used on a single hanging mount component.
Place template vertically on either hook of the installed hanging mounts.
9
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 9
Plumb the template, slightly pull down and mark the three locations of the service mounts
attachment locations for the model product being installed.
Note: The “V” notch in the template labeled for the model being installed can be used to
verify the center marks made in step 1 are correct.
Remove the template and repeat steps 8-9 for the other hanging mount.
10
Planar Profile Mounting System Installation Guide
008-0217-00A
Page | 10
Install the service mounts where marked.
Note: Two of the side mount attachment locations are slotted, in case when the panel is
installed there needs to be a slight vertical adjustment in location.
Release the locking tabs on the service mounts so they do not interfere with the display
installation.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Planar Support et étagère
Manuels Support et étagère populaires d'autres marques
Salamander
Salamander Acadia AC/W/L400/WH Manuel utilisateur
Fohhn
Fohhn VAT-09 Guide de l'utilisateur
ricoo
ricoo FS0522 Manuel utilisateur
AMSOIL
AMSOIL BMK-22 Guide rapide
Kargo Master
Kargo Master 48220 Manuel utilisateur
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur
