Planar LA1710R Manuel utilisateur
LA1710R and LA1710RTR Operations Manual www.planar.com
2
Table of Contents
Usage Notice
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Introduction
About the Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Package Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Installation
Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
User Controls
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
How to Use the OSD Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
On-Screen Display Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Appendix
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Warning Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Compatibility Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Touch Screen Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . .21
3
Precautions
Follow all warnings, precautions and maintenance as recommended in this
user’s manual to maximize the life of your unit.
Do:
Turn off the product before cleaning.
Use only a dry soft cloth or clean room wiper when
cleaning the LCD panel surface.
Use only high quality and safety approved AC/DC power
adapter.
Disconnect the power plug from AC outlet if the product
is not used for a long period of time.
Don’t:
Do not touch the LCD panel surface with sharp or hard
objects.
Do not use abrasive cleaners, waxes or solvents for
cleaning.
Do not operate the product under the following condi-
tions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- Place in direct sunlight.
Usage Notice
WARNING – To prevent the risk of fire or shock hazards, do not
expose this product to rain or moisture.
WARNING – Please do not open or disassemble the product as this
may cause electric shock.
!
!
4
Introduction
About Planar’s LA1710R / LA1710RTR
The LA17 is a 17” flat panel screen with an active matrix, thin-film tran-
sistor (TFT), liquid crystal display (LCD).
Features include:
Dual signal input: Analog VGA and Digital DVI-D
Active matrix TFT LCD technology
1280 x 1024 SXGA resolution
17” viewable display area
31.5 ~ 80 kHz horizontal scan
56 ~ 75 Hz refresh rate
0.264mm x 0.264mm pixel pitch
260 cd/m2(typ.) brightness
4 CCFT backlights lamps w/30,000 hrs life
450:1(typ.) contrast ratio
L/R=70º/70º,U/D=70º/70º viewing angle, CR=10
Tr+Tf: 16ms(typ.) response time
Auto-adjustment function
Multilingual OSD user controls
VESA DPMS power saving
Durable, 7-wire resistive touch screen( for LA1710RTR)
5
Touch Screen (for LA1710RTR)
Resistive for finger and pen interface
Surface: Anti-glare treatment
Interface: USB
Durability:
Note Life: 106words (min.)
Input Life: 107times (min.)
Hardness of surface = pencil hardness 2H (min.)
Operating force =0.05~0.49N (5~50gf)
Measured with R8 silicon rubber hardness 60º
Transparency: 78%
HAZE = 5% (typ.)
Insulation resistance= 10Mohm/DC25V (min.)
Driver: Windows®95/98/Me/NT/2000/XP,DOS,Win3.1, Win CEx86
6
Package Overview
LCD Display Power Adapter Power Cord
VGA Signal Cable Quick Start Guide Touch Screen Driver
Installation CD-ROM
(for LA1710RTR)
LCD Display
7
Installation
Product Overview
• Front View
• Rear View
LCD Display
Connector Ports “A” Connector Ports “B”
8
• Connector Ports “A”
• Connector Ports “B”
USB
(For LA1710RTR)
9
Connecting the display (Figure 1.1)
To configure this monitor, please refer to the following figure and
procedures.
1. Be sure all equipment is off.
2. Connect the DC power cord to the power connector. Plug one end
of the AC power cord into the power adapter, and the other end into
an electrical outlet(1).
3. For the PC with Analog output: connect the VGA signal cable from
display VGA input connector to the 15-pin connector of your host
computer and tighten the screws(2).
4. Connect the USB cable from USB port of your display to the USB
port of your computer(3).
5. Turn on your computer, display and video source.
Notice: To ensure the LCD display works well with your computer, configure
the display mode of your graphic card, less than or equal to 1280 x
1024 resolution and make sure the timing of the display mode is com-
patible with the LCD panel. “Compatibility Modes” of this LCD panel
are listed in the appendices for your reference.
10
Figure 1.1
Autres manuels pour LA1710R
3
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Planar Moniteur
Planar
Planar PL150 Manuel utilisateur
Planar
Planar PX2491W Manuel utilisateur
Planar
Planar PT1545R Manuel utilisateur
Planar
Planar EL640.480-A Manuel utilisateur
Planar
Planar LB1500R Manuel utilisateur
Planar
Planar PX171M Manuel utilisateur
Planar
Planar PXL2430MW Manuel utilisateur
Planar
Planar PT1700M(U) Manuel utilisateur
Planar
Planar PLL1900MW Manuel utilisateur
Planar
Planar LA1500R Manuel utilisateur
Planar
Planar EP-Series Manuel utilisateur
Planar
Planar PXN2200 Manuel utilisateur
Planar
Planar LX1501PTI Manuel utilisateur
Planar
Planar LT1201 Manuel utilisateur
Planar
Planar PT1745P Manuel utilisateur
Planar
Planar EP6514K Manuel utilisateur
Planar
Planar PL2010 Manuel utilisateur
Planar
Planar EP-Series Manuel utilisateur
Planar
Planar PT1945R Manuel utilisateur
Planar
Planar LC08 Manuel utilisateur
