Pixio C2L Manuel utilisateur

WARNING

· Image may different from the actual product.

· Make sure the package is perfect before sign it, if any defect please ask

carrier confirm it.

· Verify all the parts are included, not all the hardware included will be used.

· Install according to manual, or improper installation and assemble may cause

display to fall suddenly so producer will not response for any loss or injury.

· The product contains small items so keep away of children.

· Choose approximate place for mounting, and be aware of display size,extension

height adjustment,maxium weight capacity and pitch or roll requirement.

P 1/8 A-01

Multiple Flexiele Monitors Stand

C2L

Installation Instruction

step 1

Parts list:

Arm assemble 1 Pole assemble 3

P 2/8 A-01

C- (8.0mm*80mm)-1 pcs

A- (M4x12)-8 pcs B- (M4x16)-8 pcs

D- (Ø8.0*Ø5.5*5mm)-8 pcs E- (5.0mm*150mm)-1 pcs

Desk clamp 1X

Clamp-1

Install desk clamp and screw

tightly with 8mm allen key

(Figure1-1)

Figure1-1

Install grommet clamp and

screw tightly with 8mm allen

key (Figure1-3)

Clamp-2

Figure1-2

50.0

80.0

F- (2.0mm*50mm)-1 pcs G- (4.0mm*60mm)-1 pcs

step 2

P 3/8 A-01

Figure2-1

Screw the pole then connect

with the desk part

(Figure 2-1）

Install the desk part

(Figure 2-2）

Figure2-2

step 3

Take arm assemble（1）to attach the pole assemble（3），

then adjust the height properly,and tighten adjust lock

collar as Figure3-1

Lock Collar

Use 8mm(C) allen key to tighten the

screw of pole assemble to secure arm

assemble with pole assemble.

(Figure3-2）

Figure3-1

Figure3-2

2~4mm

step 5

Place the display face down on protective surface，

and choose proper screw.When turn the two screws

in the upper back face,make sure the distance is

2-4mm between the head of screw and display as

Figure 4-1.

Figure4-1 Figure4-2

Figure5-1

A/B

C/D

Choose C or D proper screw for

different display back face with

spacer.When turn the two screws

in the upper back face as

Figure4-2,make sure the distance

is 2-4mm between the head of

spacers and display as

Figure 5-1.

step 4

P 4/8 A-01

step 7

P 5/8 A-01

Tight or loose the screw by hand to align the

displays.Or you can pitch display to get the horizontal

level.(Figure7-1 and Figure 7-2).

Figure7-1

Figure7-2

Swivel adjustment Swivel adjustment

step 6

Attach the display with two screws in the

center mount bracket，then use Philips

screwdriver to tighten the two screws. Stop

suddenly when you encounter any resistance.

as Figure6-1

Figure6-1

Then take proper screws to tighten the

other two screws (Figure6-2)

Figure6-2

step 9

Move left

and right

Move left

and right

Figure9-1

P 6/8 A-01

Move the monitor and get zero distance

between monitors，then loose or tighten screw

by hand Figure 9-1.

Warning: When loose the

screws Only one loop,

not more than three.

step 8

12°

The product can tilt forward and backforward+12/-12

degree to get good view.And also can adjust horizontal

level.Use 4mm allen key(G) to tighten or loose the control

hex screw as Figure 8-1～8-4.

Figure8-1 Figure8-2

Figure8-4

Figure8-3

Swing

adjustment

Displays in both sides can come forward 0～18 degrees

to suit different view angle. Then use 4mm allen key(G)

to tighten or loose to get required angle as Figure11-1.

Figure11-1

step 11

P 7/8 A-01

Swing

adjustment

step 10

Figure10-1

Loose the screws by hand to

slide left and right.

Attach the cable to the arm and pole with plastic clip and insure

enough slack is left in the cables to allow for movement. Use the

cable clip to secure the cables to the pole and

get clean look as Figure 11-2

Figure11-2

P 8/8 A-01

step 11

Table des matières

Autres manuels Pixio Support et étagère

Pixio

Pixio PS2S WHITE Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur