Pit Boss 10806 Manuel utilisateur

 /  /  /  /   24

 /  /  /  /   10806

  |  '

   |  |   



  

IMPORTANT, READ CAREFULLY, RETAIN

FOR FUTURE REFERENCE. MANUAL MUST

BE READ BEFORE OPERATING!

  

  

IMPORTANT, PRENEZ CONNAISSANCE DE

CE DOCUMENT ET CONSERVEZ-LE POUR

RÉFÉRENCE ULTÉRIEURE. VOUS DEVEZ LIRE

CE GUIDE AVANT D’UTILISER LE BARBECUE!

  

  

IMPORTANTE, LEER DETENIDAMENTE,

CONSERVAR PARA REFERENCIA FUTURA.

LEA EL MANUAL ANTES DEL USO!



WICHTIG: AUFMERKSAM LESEN UND GUT

AUFBEWAHREN BITTE UNBEDINGT VOR

GEBRAUCH DIE BEDIENUNGSANLEITUNG

SORGFÄLTIG DURCHLESEN!

 

  

IMPORTANTE: LEGGERE ATTENTAMENTE E

CONSERVARE PER RIFERIMENTO FUTURO.

LEGGERE IL MANUALE PRIMA DELL'USO.

For outdoor nd household use onl Not for commercl use

Réservé  l'use extéreur et résdentel unquement Non destné  un use commercl

Solo pr uso doméstco  en el exteror No pto pr uso comercl

Btte nur m Freen und prvt nutzen Ncht fr de ewerblche Anwendun eenet

Solo per uso domestco ed esterno Non per uso commercle

WARNING:       

         

     ,   

        

     

 

AVERTISSEMENT:

  '   

        

      ,

        

     

   '     

ADVERTENCIA:         

       , 

  ,    

        

        

          

ACHTUNG:       

,       

     

,       

    

         

  

AVVERTENZA:  '  

'  '    

       

,       

   '      

       

    

EN ENGLISH

may be copied, transmitted, transcribed, stored in a

retrieval system, in any form or by any means without

expressed written permission of,

 

11 Rue Galvani Paris, France 75017

  

8877 North Gainey Center Drive, Scottsdale, AZ, USA 85258

 

www.pitboss-grills.com

  

Parts & Specs.......................................................................3

Assembly Preparation.......................................................4

Assembly Instructions.......................................................4

Installing The Wheels....................................................................4

Mounting The Body Bracket Handles.......................................5

Securing The Chimney ..................................................................5

Mounting The Lid Handle ............................................................5

Mounting The Door Handle.........................................................6

Installing The Air Intake Pipes ....................................................6

Securing The Side Shelf Brackets ...............................................6

Installing The Side Shelves ..........................................................7

Mounting The Thermometer ......................................................7

Installing The Charcoal Basket....................................................7

Placing The Cooking Components .............................................8

ENGLISH

  

MODEL ASSEMBLED (WxDxH) WEIGHT GRIDS GRID DIAMETER COOKING AREA

 24 1,357  1,300  856 

/ 53.4  51.1  33.7  67.0 

/ 147.7  356.1 

/ 22.1  7,471 

/ 1,158 

Part# Description

1 Chimney Assembly (x1)

2 Thermometer (x1)

3 Lid Handle (x1)

4 Barrel Body (x1)

5 Body Bracket Handle (x2)

6 Side Shelf (x2)

7 Side Shelf Bracket - Left (x2)

8 Side Shelf Bracket - Right (x2)

9 Air Intake Pipe (x2)

10 Air Intake Silicone Pad (x2)

11 Hanging Rack (x1)

12 Cooking Grid (x3)

13 Heat Diffuser Plate (x1)

14 Charcoal Basket (x1)

15 Charcoal Tray (x1)

16 Door Handle (x1)

17 Wheel (x2)

A Wheel Axle Pin (x2)

B Wheel Washer (x2)

C Wheel Cotter Pin (x2)

D Screw (x4)

E Screw (x14)

F Locking Washer (x4)

G Washer (x4)

H Screw (x8)

I Step Screw (x4)

NOTE: Due to ongoing product development, parts are subject to change without notice. Contact

Customer Care if parts are missing when assembling the unit.

125

16 12

17 15

  

 









EN ENGLISH

 

IMPORTANT: It is advised to read each step entirely before starting assembly on instructions. Do not tighten screws

completely until all screws for that step have been installed. Hardware combination involving a locking washer and

washer should be installed with the locking washer closest to the head of the screw.

1.   

Parts Required:

1 x Barrel Body (#4)

2 x Wheel (#17)

2 x Wheel Axle Pin (#A)

2 x Wheel Washer (#B)

2 x Wheel Cotter Pin (#C)

Installation:

• Place a piece of cardboard on the floor to prevent scratching the unit

and parts during assembly.

• Insert Wheel Axel Pin through the Wheel to the base of the Barrel Body

and into the hole, as shown. From below, add a Wheel Washer, then

secure using the Wheel Cotter Pin. Repeat same installation for the

other Wheel.

NOTE: Once installed, both wheels should spin freely.

 

Parts are located throughout the shipping carton, including underneath the smoker. Inspect the unit, parts, and hardware blister

pack after removing from the protective shipping carton. Discard all packaging materials from inside and outside of the smoker

before assembly, then review and inspect all parts by referencing the parts list. If any part is missing or damaged, do not attempt

to assemble. Shipping damage is not covered under warranty. Contact your dealer or Pit Boss® Grills Customer Care for parts.

www.pitboss-grills.com

IMPORTANT: Using two people is necessary when assembling this unit.

Tools required for assembly: Phillips screwdriver. Tools not included.



17 







ENGLISH

2.     

Parts Required:

2 x Body Bracket Handle (#5)

4 x Screw (#D)

4 x Locking Washer (#F)

4 x Washer (#G)

Installation:

• Insert the open end of a Body Bracket Handle into the top end of the

Body Bracket, pushing it in until the mounting holes align. Secure using

two washers, locking washers, and screws. Repeat installation for the

second Body Bracket Handle. See illustration for proper arrangement.

3.   

Parts Required:

1 x Chimney Assembly (#1)

4 x Screw (#E)

Installation:

• First, twist the Chimney Cap off of the Chimney Stack. This will make

the Chimney Stack easier to install. Locate the round opening on the

top of the Barrel Lid. From the outside, secure the Chimney Stack to the

top of the Barrel Lid using four screws. The screw will fasten to the self-

clinching nut on the inside of the Barrel Lid. Note illustration 3A.

• Replace the Chimney Cap by twisting it back onto the top of the Chimney

Stack. Note illustration 3B.

NOTE: Adjust the Chimney Cap to affect the airflow inside the

Smoker. If cooking at low temperature, keep the cap more closed to

restrict airflow. If cooking at a high temperature, keep the cap more

open to increase airflow.

4.    

Parts Required:

1 x Lid Handle (#3)

Installation:

• Remove the pre-installed screws, locking washers, and washers from the

Lid Handle. From the inside the Lid of the Barrel Body, insert one screw,

locking washer, and washer to protrude to the outside, then secure the

screw (from the inside) into the Lid Handle. Repeat same installation for

other end of the Lid Handle.

3

3









EN ENGLISH

5.    

Parts Required:

1 x Door Handle (#16)

Installation:

• First, open the Charcoal Refill Door. Pull the end of the Door Buckles to

release the Door Buckles latch that seals the Charcoal Refill Door. Note

detail illustration 5A & 5B.

• Remove the pre-installed screws, nylon gaskets, locking washers, and

washers. From the inside the Charcoal Refill Door, insert one screw,

locking washer, and washer to protrude to the outside, then add the

nylon gasket over the protruding screw. Secure the screw (from the

inside) into the Door Handle. Repeat same installation for other end of

the Door Handle. Note illustration 5B.

6.     

Parts Required:

2 x Air Intake Pipe (#9)

2 x Air Intake Silicone Pad (#10)

10 x Screw (#E)

Installation:

• Starting on one side, place an Air Intake Silicon Pad between the Air

Intake Pipe and align the mounting holes with the Barrel Body, as

shown. Then tighten each of the four screws halfway first. Secure a fifth

screw, from the inside of the Barrel Body, into the upper part of the

Air Intake Pipe. Once all five screws are mounted and aligned properly,

tighten completely.

• Repeat same installation for the other Air Intake Pipe on the opposing

side of the Barrel Body.

IMPORTANT: The bottom part of each Air Intake Pipe should be

completely sealed (once completely tightened) to avoid any chance

ofembers escapingwhilethe charcoalis lit.If therearegaps,unscrew

and attempt to reinstall again.

7.     

Parts Required:

2 x Side Shelf Bracket - Left (#7)

2 x Side Shelf Bracket - Right (#8)

8 x Screw (#H)

Installation:

• Note illustration for proper arrangement. Mount one Side Shelf Bracket

to the Barrel Body using two screws. Install each screw halfway first,

then tighten completely when both screws are mounted and aligned

properly. Repeat installation for the other three Side Shelf Brackets to

the Barrel Body.

787



5

5







ENGLISH

8.    

Parts Required:

2 x Side Shelf (#6)

4 x Step Screw (#I)

Installation:

• Align and position one Side Shelf onto the Side Shelf Brackets on one

side of the Barrel Body. From underneath, secure a step screw into each

corner, as shown the detailed illustration. Repeat same installation for

the Side Shelf on the other side of the unit.

NOTE: Once installed, both Side Shelves can be raised (for use) or

lowered (for storage) with ease.

IMPORTANT: Avoid using the Side Shelves to move or lift the unit.

The weight of the unit will cause the shelves to break, which is not

covered by warranty.

9.   

Parts Required:

1 x Thermometer (#2)

Installation:

• First, remove the pre-installed nut and washer from the stem of the

Thermometer.

• From the outside of the Barrel Body insert the stem of the Thermometer

from the outside, then secure into place using the washer and nut from

the inside of the Barrel Body.

NOTE: Ensure the Thermometer is rotated for readability.

10.    

Parts Required:

1 x Charcoal Basket (#14)

1 x Charcoal Tray (#15)

Installation:

• First, place the Charcoal Basket onto the inset grooves of the Charcoal

Tray, as shown in illustration 10A. The Charcoal Basket will rest in these

grooves without fastening.

• Next, with the Charcoal Refill Door open, place the combined Charcoal

Basket and Tray into the base of the door. Note illustration 10B. Once

in position, close the Charcoal Refill Door and latch the Door Buckles to

seal.



10

10

EN ENGLISH

11.    

Parts Required:

1 x Hanging Rack (#11)

3 x Cooking Grid (#12)

1 x Heat Diffuser Plate (#13)

Installation:

• Open the Lid of the Barrel Body. Insert the Heat Diffuser Plate into

the lowest position inside the Barrel Body, directly above the Charcoal

Basket.

NOTE: The Heat Diffuser Plate is used to disperse the direct heat

from the Charcoal Basket, creating a more even heat distribution

throughout the Barrel Body.

• Next, place the Cooking Grids into the Barrel Body, resting each grid on

the pre-mounted support brackets. Adjust the height of the support

brackets, as needed.

NOTE: To maintain the grilling performance of your Cooking Grids,

regular care and maintenance is required.

• When desired for use, remove the Cooking Grids and place the Hanging

Rack on the highest position inside the Barrel Body.

• The unit is now completely assembled.

Refer to Owner's Manual for Operating Instructions.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Pit Boss Fumeur

Pit Boss

Pit Boss Competition Series Manuel utilisateur

Pit Boss

Pit Boss 0094876 Manuel de la liste des pièces

Pit Boss

Pit Boss Competition Series Instructions d'installation

Pit Boss

Pit Boss 3 Series Manuel de la liste des pièces

Pit Boss

Pit Boss HAMMERTONE 2 Series Instructions d'installation

Pit Boss

Pit Boss PRO Series Instructions d'installation

Pit Boss

Pit Boss PB0600SS Manuel utilisateur

Pit Boss

Pit Boss PBV3D1 Manuel utilisateur

Pit Boss

Pit Boss V5P1 Instructions d'installation

Pit Boss

Pit Boss CHAMPION PBV24CB Manuel utilisateur

Pit Boss

Pit Boss COPPERHEAD PBV3PM1 Instructions d'installation

Pit Boss

Pit Boss HAMMERTONE 2 Series Manuel de la liste des pièces

Pit Boss

Pit Boss PB2BPGG Manuel utilisateur

Pit Boss

Pit Boss 7 Series Instructions d'installation

Pit Boss

Pit Boss PBV5PW1 Manuel de la liste des pièces

Pit Boss

Pit Boss PBV2G1 Manuel de la liste des pièces

Pit Boss

Pit Boss PRO Series PBV6PSE ELITE Instructions d'installation

Pit Boss

Pit Boss PLATINUM PBV5PL Manuel utilisateur

Pit Boss

Pit Boss Competition Series Manuel utilisateur

Pit Boss

Pit Boss PBV3A1 Manuel de la liste des pièces

Pit Boss

Pit Boss 4 Series Manuel utilisateur

Pit Boss

Pit Boss 3 Series Instructions d'installation

Pit Boss

Pit Boss 10734 Manuel utilisateur

Pit Boss

Pit Boss PBV7P1 Manuel utilisateur

Manuels Fumeur populaires d'autres marques

Smoke hollow

Smoke hollow 30166E Manuel utilisateur

oklahoma joes

oklahoma joes 15202037 Manuel utilisateur

Trail Embers

Trail Embers SMK7030AS Manuel utilisateur

Masterbuilt

Masterbuilt 20100814 Manuel de l'opérateur

Klarstein

Klarstein 10031325 Manuel utilisateur

Kingsford

Kingsford SC2315801-KF Manuel utilisateur

Char-Broil

Char-Broil 1000 Manuel utilisateur

Auber

Auber WS-1500DPMS Manuel utilisateur

Char-Broil

Char-Broil 1000 Manuel utilisateur

oklahoma joes

oklahoma joes 14201884 Manuel utilisateur

Lang BBQ Smokers

Lang BBQ Smokers 36 Series Mode d’emploi

Smokey Bandit

Smokey Bandit Lumberjack Manuel utilisateur

Masterbuilt

Masterbuilt 20072612 Mode d’emploi

Char-Broil

Char-Broil 12701705 Manuel utilisateur

Rosle

Rosle Silence Manuel utilisateur

Masterbuilt

Masterbuilt 20070910 DIGITAL SMOKEHOUSE Mode d’emploi

Royal Catering

Royal Catering RCRO-1300 Manuel utilisateur

Masterbuilt

Masterbuilt MES 130B Manuel utilisateur