Pima Hunter-Pro 32 Manuel utilisateur

HUNTER-PRO 32

Intruder Alarm System

Installation Guide

PIMA Electronic Systems Ltd.

5 Hatzoref Street, Holon 58856, Israel

℡

+972-3-5587722



+972-3-5500442



support@pima-alarms.com



http://www.pima-alarms.com

PIMA Electronic Systems Ltd. does not represent that its Product may not be

compromised and/or circumvented, or that the Product will prevent any death,

personal and/or bodily injury and/or damage to property resulting from

burglary, robbery, fire or otherwise, or that the Product will in all cases provide

adequate warning or protection. The User understands that a properly

installed and maintained equipment may only reduce the risk of events such

as burglary, robbery, and fire without warning, but it is not insurance or a

guarantee that such will not occur or that there will be no death, personal

damage and/or damage to property as a result.

PIMA Electronic Systems Ltd. shall have no liability for any death,

personal and/or bodily injury and/or damage to property or other

loss whether direct, indirect, incidental, consequential or otherwise,

based on a claim that the Product failed to function.

Warning:

The user should follow the installation and operation instructions

and among other things test the Product and the whole system at least once a

week. For various reasons, including, but not limited to, changes in

environment conditions, electric or electronic disruptions and tampering, the

Product may not perform as expected. The user is advised to take all

necessary precautions for his/her safety and the protection of his/her

property.

This document may not be duplicated, circulated, altered, modified, translated,

reduced to any form or otherwise changed; unless PIMA’s prior written

consent is granted.

All efforts have been made to ensure that the content of this manual is

accurate. Pima retains the right to modify this manual or any part thereof,

from time to time, without serving any prior notice of such modification.

Please read this manual in its entirety before attempting to program or

operate your system. Should you misunderstand any part of this manual,

please contact the supplier or installer of this system.



Israelhttp://www.pima-alarms.com

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

Table of Contents

CHAPTER 1 Introduction............................................................. 7

1.1

Main Features HUNTER-PRO 32 .............................................8

1.2

Safety Precautions.................................................................9

1.3

Signs and Abbreviations Key ..................................................9

1.4

The Control-Panel................................................................ 11

1.4.1

Control Panel Fuses....................................................... 12

1.4.2

The Control Panel’s Connections & Terminals ................. 12

CHAPTER 2 Partitions ............................................................... 16

2.1

General............................................................................... 16

2.2

Examples ............................................................................ 17

2.2.1

Example A .................................................................... 17

2.2.2

Example B .................................................................... 18

2.2.3

Example C .................................................................... 20

CHAPTER 3 Installing Peripherals ............................................ 21

3.1

General............................................................................... 21

3.2

Connecting Zones................................................................ 22

3.2.1

Zone Inputs.................................................................. 22

3.2.2

Connecting Detector without using EOL resistor.............. 22

3.2.3

Connecting Detector using ONE EOL resistor

............................. 23

3.2.4

Connecting Detector using TWO EOL resistors

........................... 24

3.3

Connecting Zone-Expanders

(General)

................................... 25

3.3.1

EXP-LOCAL: Local Expansion ......................................... 26

3.3.2

I/O-8: Remote Expanders.............................................. 27

3.3.3

RC-PRO: Wireless Expansion.......................................... 29

3.4

Connecting Key/Remote Control........................................... 29

3.5

TMPR1 and TMPR2 .............................................................. 30

3.6

Connecting Sirens................................................................ 31

3.6.1

AC Siren (Horn/Speaker) ............................................... 31

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

3.6.2

Low current DC Siren (Piazzo) ....................................... 32

3.6.3

Low current DC Siren (Bell) ........................................... 33

3.7

Relay Outputs ..................................................................... 33

3.8

Auxiliary Outputs: ON/OFF

(AUX1)

ALARM

(AUX2)

.................. 34

3.9

Expansion Outputs: OUT-1000

............................................ 34

3.10

Connecting Keypads ......................................................... 35

3.10.1

LCD Keypads: RXN-400/410 .......................................... 36

3.11

Telephone Line and Devices

................................................ 37

3.12

TRV/TRU-100................................................................... 38

3.12.1

Connecting the Transmitter ........................................... 38

3.13

Microphone Unit: MIC-100 ................................................ 40

3.14

Connecting Voice Unit: VU-20 ........................................... 40

3.15

Connecting Battery........................................................... 41

3.16

Connecting Mains............................................................. 42

3.17

Initializing the System ...................................................... 42

3.17.1

Setting Time ................................................................. 43

CHAPTER 4 Operating & Programming the System ................ 44

4.1

General............................................................................... 44

4.2

Programming Possibilities..................................................... 44

4.2.1

Programming with the Fast Programmer PRG-22 ............ 44

4.2.2

Local Programming with COMAX & LCL-11A ................... 45

4.2.3

Remote Programming with Modem and COMAX.............. 46

4.2.4

Programming with a Keypad .......................................... 46

4.3

Programming with a Keypad

.................................................. 46

4.3.1

PIMA Programming Method ........................................... 46

4.3.2

Entering “User Menu”.................................................... 48

CHAPTER 5 Technician Menu.................................................... 49

5.1

Entering Technician Menu .................................................... 49

5.2

Installing the System ........................................................... 49

5.2.1

Service Provider ............................................................ 49

5.2.2

Wire Expenders............................................................. 50

5.2.3

Wireless Expender ........................................................ 51

5.2.4

Keypads ....................................................................... 52

5.2.5

Keypads Partitions ........................................................ 52

5.3

Zone Programming .............................................................. 53

5.3.1

Zone Characteristics...................................................... 53

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

5.3.2

Zone Name................................................................... 55

5.3.3

Partitioning ................................................................... 55

5.3.4

Zone Responses (Templates)......................................... 55

5.4

Communication Parameters ................................................. 56

5.4.1

Communication to Central Monitoring Station

........................ 56

5.4.2

Radio Transmitter ......................................................... 61

5.4.3

Modem Call Back .......................................................... 62

5.4.4

Communication Features ............................................... 62

5.5

TIMERS .............................................................................. 64

5.5.1

Entry/Exit Delay ............................................................ 64

5.5.2

Programming Outputs Time........................................... 64

5.5.3

AC Report Delay ........................................................... 65

5.5.4

Soak Test Days ............................................................. 65

5.5.5

Double Knock ............................................................... 66

5.5.6

Conditioned Zones Time ................................................ 66

5.5.7

Bypass Limit Time ......................................................... 67

5.5.8

False Code.................................................................... 67

5.6

General Parameters ............................................................. 67

5.6.1

General Parameters First Screen .................................... 68

5.6.2

General Parameters Second Screen................................ 69

5.7

System Responses............................................................... 70

5.7.1

System in ON State ....................................................... 70

5.7.2

5.7.2 System in OFF State ............................................. 71

5.8

Programming Outputs.......................................................... 71

5.8.1

Polarity......................................................................... 71

5.8.2

Output Cards ................................................................ 72

5.9

Programming the Entire System ........................................... 72

5.9.1

Initializing System ......................................................... 72

5.9.2

Local Download ............................................................ 72

5.9.3

Fast Programming......................................................... 73

5.10

Installer Code .................................................................. 73

5.11

Tests ............................................................................... 73

5.11.1

Walk Test ..................................................................... 74

5.11.2

Wireless Test ................................................................ 74

5.11.3

Wireless TAMPER Test................................................... 75

5.11.4

Configuring Soak Test Zones ......................................... 75

5.11.5

Siren Test..................................................................... 75

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

5.11.6

Monitoring Station Dialer Test........................................ 75

5.11.7

Central Monitoring Station Radio Test ............................ 76

5.12

Remote-Controlling via Telephone..................................... 76

CHAPTER 6 Name Programming............................................... 78

CHAPTER 7 Troubleshooting..................................................... 79

7.1

Restoring Master & Technician Codes ................................... 79

7.2

Displaying System Faults ..................................................... 80

7.3

Solutions............................................................................. 81

7.3.1

Clock............................................................................ 81

7.3.2

Battery ......................................................................... 81

7.3.3

Low DC ........................................................................ 81

7.3.4

AC Line......................................................................... 81

7.3.5

Tamper ........................................................................ 82

7.3.6

Zone ............................................................................ 82

7.3.6

Keyboard Not Connected............................................... 82

7.3.7

Telephone .................................................................... 83

7.3.8

Communication............................................................. 83

7.3.9

Automatic Arming Failure .............................................. 85

7.3.10

Open Zone does not cause Alarm................................... 85

CHAPTER 8 Tables..................................................................... 86

8.1

Programming System Defaults ............................................. 86

8.2

Central-Station Report Formats ............................................ 92

8.2.1

Pulse Formats ............................................................... 92

8.2.2

DTMF Formats .................

Error! Bookmark not defined.

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

CHAPTER 1

NTRODUCTION

HUNTER-PRO 32 Intruder Alarm System contains many features that fits

customer’s individual needs, and yet remains easy to program and use both by

the customer and the technician.

The HUNTER-PRO 32 is secured against radio-frequency (RF) interference and

electro-magnetic interferences (EMI). In this guide you will find installation

instructions, description of programming options and further information to

assist installation and operation of the system.

IMPORTANT!

For every-day operation uses, please see HUNTER-PRO 32 User Guide booklet,

which is an integral part of the Installer Guide. Furthermore, the User Guide

includes user’s programming parameters instructions, which is crucial for

operating the system.

For any further questions, please do not hesitate to contact your local

PIMA

distributor or

PIMA

directly at:

PIMA Electronic Systems Ltd.

Tel.: +972–3–558 7722

Fax: +972–3–550 0442

Email: support@pima-alarms.com

Up to date literature is available to download from our website:

www.pima-alarms.com

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

1.1 Main Features HUNTER-PRO 32



8 to 32 zones with wireless add-on, local, and remote bus expanders



Supports a wide range of partition options:



Up to 16 partitions each with it own Account ID and Users



Up to 8 subsystems each with different keypads, IDs, etc.



Full supervision data of wireless detectors (supervision, low battery, tamper)



Comprehensive Zone Tests for flawless installation: Walk Test, Soak Test,

etc.



Two options for viewing system status:



Detailed: Scrolling events, zones’ and system’s status



“PIMA” Style: Status of all 32 zones is displayed simultaneously



Four Subscriber dialing numbers with optional voice message



Four Monitoring Stations phone numbers



PIMA unique Integrated Digital Communicator (telephone, long-range radio)



Supports split and double reporting to two monitoring stations with different

account IDs



LCD keypad with multilingual Menu-Driven screens for easy programming

and operation



Many alternatives for easy programming (Keypad, Fast Programmer,

Local/Remote download software)



Up to 24 users with various authorization levels



Various accessories (mic, voice unit etc.)



Memory Log up to 410 events



Automatic Arming at a preset time and/or after a preset silence time



System remote control via any touchtone telephone

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

1.2 Safety Precautions

Your HUNTER-PRO 32 alarm system has been registered with the CE in

accordance with EN 60950 of its rules. The CE requires us to tell you the

following information:

 To reduce the risk of fire or electric shock, do not expose this alarm

system to rain or moisture.

 Do not open the door of the alarm system. Dangerous high voltages

are present inside of the enclosure. Refer servicing to qualified

personnel only.

 This alarm system should be used with AC 230V, 50Hz. To prevent

electric shocks and fire hazards, do NOT use any other power source.

 Do not spill liquid of any kind onto the unit. If liquid is accidentally

spilled onto the unit, immediately consult a qualified service.

 Install this product in a protected location where no one can trip over

any line or power cored. Protect cords from damage or abrasion.

 Disconnect all sources of power supply before proceeding with the

installation.

 Connect the AC wires to the terminal block on the PCB as marking. Pay

attention to polarity.

1.3 Signs and Abbreviations Key



Key press



Press and hold key, until confirmation beep is heard

Save data

Press this key at any programming stage in order to return to

root screen

Default Master Code:

5555

“Enabled User Code”

: A code enabled by technician to enter the user menu

HUNTER-PRO 32 Intruder Alarm System - Installation Manual

“LCD Zone Numbers”

: Referring to the frame of zones engraved above and

below the LCD display window, indicating the zones’

numbers.

CMS

: Central Monitoring Station

Autres manuels pour Hunter-Pro 32

Table des matières

Autres manuels Pima Système de sécurité

Pima

Pima hunter-pro Manuel utilisateur

Pima

Pima hunter-pro Manuel utilisateur

Pima

Pima SRO743 Caractéristiques techniques

Pima

Pima Hunter-Pro 832 Manuel utilisateur

Pima

Pima VISION Manuel utilisateur

Pima

Pima RPB Manuel utilisateur

Pima

Pima HUNTER-PRO 32 RXN-9/416 Manuel utilisateur

Pima

Pima hunter-pro Manuel utilisateur

Pima

Pima Hunter-Pro 832 Manuel utilisateur

Pima

Pima FORCE Manuel utilisateur

Pima

Pima Sentinel Manuel de l'opérateur

Pima

Pima FORCE Mode d'emploi

Pima

Pima FORCE Series Manuel utilisateur

Pima

Pima AlarmView Manuel utilisateur

Pima

Pima FORCE Manuel utilisateur

Pima

Pima CAPTAIN-i 4410061 Manuel utilisateur

Pima

Pima Captain 8 Hunter-Pro 832 Manuel utilisateur

Pima

Pima hunter-pro Guide de configuration

Pima

Pima Captain 6 Manuel utilisateur

Pima

Pima Captain 6 Manuel utilisateur

Pima

Pima VISION Manuel utilisateur

Pima

Pima HUNTER-PRO 896 Manuel utilisateur

Pima

Pima Hunter-Pro 832 Manuel utilisateur

Pima

Pima SRO143 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur