Picberm PB2312 Manuel utilisateur
User Manual
of
Picberm Centrifugal Juicer
PB2312
Printing Version: M
Contents
Chapter I. Precautions for Safe Operation................1
Chapter II. Parts and Functions.................................4
Chapter III. Method of Operation.............................6
Chapter IV. How to Assemble...................................6
Chapter V. Tips for Ingredients Selection..................9
Chapter VI. Maintenance and Preservation..............12
Chapter VII. Trouble Shooting.................................14
Chapter VIII. Applicable Standard...........................15
Read the instructions below carefully before use.
Before using the Juicer, please check the consistency between actual
voltage with its rated voltage (110-130V～/60Hz).
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance
in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Warning: Potential injury from misuse. Care shall be taken when
handling the sharp cutting blades, emptying the bowl and during
cleaning.
This appliance shall not be used by children. Keep the appliance and
its cord out of reach of children.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a
hazard.
Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
This appliance is intended for household use and similar applications,
such as the following:
1
Chapter I. Precautions for Safe Operation
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential-type environments;
- breakfast-type environments.
Before power on, please ensure that detachable parts, such as juicing
sieve and top cap, are put in place and fully fastened; if juicing sieve
is damaged, please stop using the Juicer.
During operating, do not put hand or sharp object into feed inlet. It is
strictly prohibited to use any other thing as a pusher. Keep your eyes
away from the feed inlet in case of accidents.
During operating, do not touch parts such as juicing sieve and motor
wheel with operator’s body or other hard foreign matters in case of
injury or damage to the Juicer.
When using and completing juicing, please ensure that the motor
stops running and power is cut before removing its detachable parts.
Fruits and vegetables shall have pits, hard seeds, thick skin or hard
cores removed before processing.
It is strictly prohibited to sterilize all accessories with hot water
beyond 80℃ or to microwave in case of thermal deformation and
damage.
2
Do not directly put the Juicer body into water or flush it with water in
case of failure. Before wiping the Juicer body, power must be
disconnected.
Do not clean the Juicer with steel wool, abrasive cleaners or corrosive
liquid (e.g., gasoline, acetone).
Please operate it in strict accordance with rated working time: time of
continuous working shall not exceed 1 min; each cycle must be
stopped for 2 mins after completing functions; it must be stopped for
15-20 min after continuously working 3 cycles, and then restarted
after motor has cooled. This method is helpful to extend its lifetime.
Non-professionals are not allowed to randomly remove its detachable
parts as it may cause electric shock; if the Juicer fails, please send it to
a specified maintenance station for service.
Upon completion, please disconnect the power cord. If damaged, the
power cord must be replaced by a professional from the manufacturer,
its maintenance department or a similar department to prevent any
danger.
This Juicer is for household use only. It is inadvisable to use it for
commercial purposes.
FOR FOOD CONTACT USE
3
No.
Part Name
Description and Function
1Pusher
When putting the ingredients in it, tenderly
pushes and presses the ingredients to ensure full
contact with juicing sieve so as to improve
juicing efficiency.
4
Chapter II. Parts and Functions
2 Top cap
Connects with the body. Exists as a major part of
the juicing process and serves as a safety
protection.
3 Juicing sieve
Cuts the ingredients with cutter on its bottom,
filters juice and separates pomace with side
sieve.
4
Center ring
Gets and exports juice separated by juicing sieve.
5
Juice outlet
Fruit juice comes out from it through center ring.
6 Motor wheel
Used to connect juicing sieve to make the sieve
realize self-centering for easy pick and place.
7
Cup Lid
Filters fruit juice bubble and guard against dust.
8 Juice cup
Gets and collects fruit juice separated by juicing
sieve.
9 Main body
Major part of the Juicer, with internal motor and
other parts.
10 Clamp
Controls connection between top cap and the
body.
11 Rotary
switch
Controls the Juicer's working status: pulse (P),
stop (0), low-speed gear (1)and high-speed gear
(2).
12 Power cord Connects power source (110-130V～/60Hz)
13
Pomace
container
Gets and collects pomace separated by juicing
sieve.
14 Microswitch
(Safety
switch)
Safety protection so power source won’t get
though when th
e microswitch isn’t depressed by
the top cap. This means the juicer won’t work if
it hasn’t been assembled tightly.
5
Before initial use of the Juicer, please thoroughly clean the parts in contact
with the ingredients.
Rotary Switch Operation Overview
Position“P”: Rapid and momentary rotation.
Position “0”: Close and shut off.
Position“1”: Low-speed gear, applied to
process soft fruits and vegetables, such as
orange, tomato, cucumber, strawberry.
Position“2”: High-speed gear, applied to
processing all fruits and vegetables.
Refer to “Tips for Ingredients Selection” for
detail instructions for selection of fruits and
vegetables.
The Juicer is designed with a double safety system and can start working
only after all parts are installed correctly.
Please install and use the Juicer as follows:
6
Chapter III. Method of Operation
Chapter IV. How to Assemble
1. Turn the body's switch into position “0”
and put the center ring into the body
2. Put the juicing sieve into the center ring
and ensure that the juicing sieve is
installed correctly on the motor wheel
(check the completeness of juicing sieve
before use; if damaged, do not use it).
3. Put the top cap into the body from the
right above and install it in the direction
indicated on the top cap.
4. Put and press the clamp to two lugs on
the top cap. It is correctly installed with a
cluttering sound, or the Juicer will not
work.
7
5. a. Slightly tilt and put the pomace
container under outlet of center ring;
b. Push the pomace container bottom to
the body to install it.
6. Put the juice cup under the juice outlet
and press down the juice outlet.
7. Connect power source and prepare for
startup. The working time shall be ≤1 min.
(Before connecting power, please ensure
the switch is off.)
8. Clean, peel (shell) and pit fruits and
vegetables, then cut them into pieces of
suitable size for feed inlet.
9. Start switch and select suitable tap
position according to type of fruits (refer to
“Tips for Ingredients Selection”). To
extend the Juicer's lifetime, it is advisable
to let it run continuously for less than
1min.
8
Table des matières
Autres manuels Picberm presse-agrumes
