Picberm PB2210 Manuel utilisateur
User Manual
of
Picberm Masticating Juicer
PB2210
Contents
Chapter I. Precautions for Safe Operation................1
Chapter II. Parts and Functions.................................4
Chapter III. Method of Operation.............................6
Chapter IV. How to Assemble...................................7
Chapter V. Tips for ingredients Selection.................10
Chapter VI. Maintenance and Preservation..............12
Chapter VII. Trouble Shooting.................................13
Chapter VIII. Applicable Standard...........................15
Read the instructions below carefully before use.
Before using the Juicer, please check the consistency between actual
voltage with its rated voltage (110-130V～/60Hz).
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance
in a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
This appliance shall not be used by children. Keep the appliance and
its cord out of reach of children.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a
hazard.
Always disconnect the appliance from the supply if it is left
unattended and before assembling, disassembling or cleaning.
This appliance is intended for household use and similar applications,
such as the following:
- staff kitchen areas in shops, offices and other working
environments;
- farm houses;
- by clients in hotels, motels and other residential-type environments;
- breakfast-type environments.
1
Chapter I. Precautions for Safe Operation
Before power on, please ensure that detachable parts, such as juicing
sieve and top cap, are put in place and fully fastened; if juicing sieve
is damaged, please stop using the Juicer.
During operating, do not put hand or sharp object into feeding inlet. It
is strictly prohibited to use any other thing as a pushing rod. Keep
your eyes away from the feeding inlet in case of accidents.
During operating, do not touch parts such as juicing sieve and motor
wheel with operator’s body or other hard foreign matters in case of
injury or damage to the Juicer.
When using and completing juicing, please ensure that the motor
stops running and power is cut before removing its detachable parts.
Fruits and vegetables shall have pits, hard seeds, thick skin or hard
cores removed before processing.
It is strictly prohibited to sterilize all accessories with hot water
beyond 80℃ or to microwave in case of thermal deformation and
damage.
Do not directly put the Juicer main body into water or flush it with
water in case of failure. Before wiping the Juicer body, power must be
disconnected.
Do not clean the Juicer with steel wool, abrasive cleaners or corrosive
liquid (e.g., gasoline, acetone).
2
Non-professionals are not allowed to randomly remove its detachable
parts as it may cause electric shock; if the Juicer fails, please send it to
a specified maintenance station for service or contact us.
Upon completion, please disconnect the power cord. If damaged, the
power cord must be replaced by a professional from the manufacturer,
maintenance department or a similar department to prevent any
danger.
This Juicer is for household use only. It is inadvisable to use it for
commercial purposes.
FOR FOOD CONTACT USE
3
No.
Name of
Parts
Function Introduction
1
Pomace
container
Contain and gather pomace separated from
juicing body.
2
Juice
container
Contain and gather juice separated from juicing
body.
3 Control panel
Control working conditions of this product,
including starting up, powering off, reverse
rotation.( it reversely rotates a while only after
turned off), hard fruits and vegetables, soft fruits
and vegetables.
4
Chapter II. Parts and Functions
10
9
8
7
6
1
23
5
4
13
11
12
4 Power cord
It is used to connect power supply and provide
working power.
5 Main body
This is the major part of this machine and
contains the motor that is the power producer and
provides working power.
6 Juicing body
Store ingredientss and produce juice and pomace
through juice outlet and pomace outlet.
7 Juicing sieve
Run with the spiral propeller, grind up
ingredientss and filter juice.
8
Spiral
propeller
Hand over and grind up ingredientss through
running with Juicing sieve.
9 Top cap
Connect with the juicing body, playing a safety
protection role.
10 pushing rod
Help to push ingredientss to juicing body for
juicing
11 Safety cover
Prevent hands or hard objects from reaching the
working area when the machine is working;Open
it to feeding ingredientss in.
12 Lock catch of
safety cover
Sliding to the left or right can make safety cover
open or close up. Safety cover is close up when
initial received.
13 Juice outlet
lid
Prevent dripping.The lid of juice outlet can be
removed. When opening the lid of juicing outlet,
juice in the juicing body can be extracted; when
the lid closes up, juice in the juicing body can be
temporarily sealed.
5
Before using this product for the first time, please thoroughly wash parts
that touch with ingredientss.
Instruction of buttons operation :
“On/off” button: starting up, power off and
reverse rotation.( it reversely rotates a while
only after turned off)
“1” button: slow rotation speed and indicator
light shows 1, this gear is used for soft fruits
and vegetables, e.g., cherry tomato.
“2” button: high rotation speed and
indicator light shows 2.This gear is used for
hard fruits and vegetables, e.g., carrot.
Note: In case of pomace discharging failure
or rotation blocked , the machine will make
sounds and shut down for one second, and
then reversely rotate for 4 seconds, and
finally power off.
(In the process of juicing, if necessary,
gently press “on/off” button, and the
indicator light shows “--”. Thereafter, the
machine will shut down for one second, and
then reversely rotate for 4 seconds, and
finally power off, and you can turn on and
continue juicing again.)
6
Chapter III. Method of Operation
1
2
ON/OFF
The Juicer is designed with a double safety system and can start working
only after all parts are installed correctly.
Please install and use the Juicer as follows:
1
Groove on the juicing body is aligned with
convexity on the Main body. Place the
juicing body on the Main body.
2
Pomace outlet on the juicing sieve
(compound net) is aligned with the pomace
outlet on the juicing body.Place the juicing
sieve into the juicing body.
(Please make sure that the red sealing
gum is inserted into the groove of
pomace outlet completely)
3
The spiral propeller is inserted into the
center of juicing sieve.Press the spiral
propeller with a decent strength to make the
spiral propeller properly inserted into the
base hole.
7
Chapter IV. How to Assemble
4
“” on the Top cap is aligned with
“” on the juicing body, spin the top cap
along with the juicing body. When a sound
is heard, this indicates a good snap-fit.
Contrary procedures are carried out for
detaching the top cap from the juicing
body.
5
Respectively put the juice container and
pomace container under the juicing outlet
and pomace outlet.
6
Connect power source and prepare for
startup. (Before connecting power, please
ensure the switch is off.)
7
Clean and remove the core, hard seeds,
thick skin or hard shell from fruits and
vegetables.
8
Table des matières
Autres manuels Picberm presse-agrumes
