Photron FASTCAM Multi Manuel utilisateur

The copyright of this manual is held by PHOTRON LIMITED.

Product specifications and manual contents are subject to change without notice.

PHOTRON LIMITED bears no responsibility for any results by using our products nor by applying this manual to any operations.

WARNING

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the users will be required to correct

the interference at their own expense.

CAUTION:

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Introduction

Thank you for your purchase of Photron’s high-speed camera system, the “FASTCAM Multi LED Light

Option” (referred to below as the system).

This manual contains the operating instructions and warnings necessary for using the system.

Before using the system, please read the entire manual.

If any part of this manual is unclear, contact Photron using the contact information printed at the back of

the manual.

After you finish reading the manual, store it in a safe place along with the warranty card and refer back to

it when necessary.

Manual Notation

The following icons and symbols are used in the explanations in this manual.

Icon/Symbol

Description

This symbol indicates content that should always be read.

This symbol indicates instructions that should always be

followed when using the software, or things to be careful of

when using the software.

This symbol indicates supplementary items to be aware of

when using the system.

This symbol indicates the location of a reference.

This symbol indicates a space for you to make notes.

“ “

This symbol is used to indicate the names of items on a

screen, references, dialog names, and connectors.

［］

This symbol is used to indicate menu names, and sub-menu

names.

Using the Manual

This section explains the layout of the manual. For other options, please refer to each manual

Introduction

The introduction explains the manual and safety precautions.

Chapter 1. Overview

This chapter gives an overview of the system and an explanation of its features.

Chapter 2. Functions

This chapter explains the system’s functions. Refer to the “Photron FASTCAM Viewer User’s Manual” for

additional details on using a PC to control the system.

Chapter 3. Specifications

This chapter explains the system’s specifications.

Chapter 4. Warranty

This chapter explains about the warranty.

Chapter 5. Contacting Photron

This chapter lists the contact information to use when contacting Photron if the system malfunctions or if a

portion of the manual is unclear.

Using the System Safely and Correctly

In order to prevent injury to yourself and others, and to prevent damage to property, carefully observe the

following safety precautions.

Photron has given its full attention to the safety of this system. However, the extent of damage and injury

potentially caused by ignoring the content of the safety precautions and using the system incorrectly is

explained next. Please pay careful attention to the content of the safety precautions when using the

system.

This symbol indicates actions that carry the risk that a person could receive a

serious injury.

This symbol indicates actions that carry the risk that a person could receive a

moderate injury, or that damage to physical property might occur.

The safety precautions to be observed are explained with the following symbols.

This symbol indicates actions that require caution.

This symbol indicates actions that are prohibited and must be avoided.

This symbol indicates actions that must always be performed.

Caution

Warning

■Do NOT try to look directly at the laser beam, or look into the laser emission port.

If you do, your eyesight can be seriously damaged.

■Do NOT try to look directly at the laser beam using an optical equipment (such as a telescope

or binoculars).

If you do, your eyesight can be seriously damaged.

■When pointing the laser beam to a reflecting object (such as a mirror, prism or metal surface),

do NOT look directly at the reflected laser beam.

If you do, your eyesight can be seriously damaged.

■Do NOT point the laser beam at other persons.

■ Do not perform actions that will damage the cable or plug.

(Do not damage the cable, modify it, use it near a heater, excessively bend, twist or pull on it,

place heavy objects on it, or bundle it.）

Using the cable when damaged can cause fire, electric shock, or a short circuit.

■ Do not insert metallic objects inside, or pour liquids such as water on, the system.

Doing so can cause fire, electric shock, or malfunction from short circuit or heat.

■ Do not disassemble or modify the system.

There are high voltages inside the system that can cause electric shock.

■ Do not plug in or unplug the LED Light Option Cable Connector with wet hands.

Doing so can cause electric shock.

Warning

■Not fully plugging in the LED Light Option Cable Connector can cause fire from electric shock

or heat.

■ When something is wrong with the system, unplug the Main Unit’s power cable immediately.

- When a foreign substance or liquid, such as metal or water, gets inside.

- When the outer case is broken or damaged, such as from a fall.

- When the system produces smoke, a strange smell, or strange sound.

Using the system in these conditions might cause a fire or electric shock.

■ Always unplug the system when cleaning it or when it is unused for a long period of time.

Leaving or storing the system connected to the power source might cause fire from insulation

deterioration or electrical discharge.

■ Do not set the system in a location where the temperature gets unusually hot.

The trunk and inside of a car can get especially hot in summer.

Doing so can cause the outer case and internal components to deteriorate or cause a fire.

■ Do not place the system in a location prone to oily smoke or steam, or in a location with a lot of

humidity or dust.

Oil, moisture, and dust conduct electricity, which can cause a fire or electric shock.

■ Ambient temperature 0-45° C, humidity 85% RH or lower, maximum altitude 2,000m or lower.

In addition, if exceeding these limits, use in a condensation-free environment.

Doing so can cause malfunction.

■ Do not store the equipment in a location where the temperature goes below -20°C or higher

than 60°C. Also, prevent condensation from forming during shipment.

■ When shipping, remove the connecting cable and use the original packaging or a dedicated

carrying case.

Do not ship the equipment in an environment where the temperature goes below

-20°C or higher than 60°C. Also, prevent condensation from forming during shipment.

Caution

“CE” mark indicates that this product complies with the European requirements for safety,

health, environment and customer protection. “CE” mark equipments are intended for sales in

Europe.

These symbols indicate that this product is not to be disposed of with your household waste,

according to the WEEE Directive (2002/96/EC), the Battery Directive (2006/66/EC) and/or your

national laws implementing those Directives.

This product should be handed over to a designated collection point, e.g., on an authorized

one-for-one basis when you buy a new similar product or to an authorized collection site for

recycling waste electrical and electronic equipment (EEE) and batteries and accumulators.

Improper handling of this type of waste could have a possible impact on the environment and

human health due to potentially hazardous substances that are generally associated with EEE.

Your cooperation in the correct disposal of this product will contribute to the effective usage of

natural resources.

For more information about the recycling of this product, please contact your local city office,

waste authority, approved scheme or your household waste disposal service or visit

www.photron.com.

(EEA: Norway, Iceland and Liechtenstein)

This product is in conformity with the protection requirements of EU Council Directive

2014/30/EU (Class A) on the approximation of the laws of the Member States relating to

electromagnetic compatibility.

Warning: This is a Class A product. In a domestic environment, this product may cause radio

interference, in which case the user may be required to take adequate measures.

European Union (and EEA) only

About the Laser

Conforming Standard

This product is categorized as Class 2 laser equipment by the following standard. It emits visible laser

light from the ports located in its front.

EN60825-1:2007

Laser Specifications

For the specifications of the laser, refer to Section 3.1.1. Product Specifications (Laser Pointer).

Laser Caution Label

Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous radiation exposure.

Caution

Laser output direction

Side view

Autres manuels pour FASTCAM Multi

Table des matières

Autres manuels Photron Appareil photo numérique

Photron

Photron IDP-Express R2000 Manuel utilisateur

Photron

Photron FASTCAM-PCI Manuel utilisateur

Photron

Photron FASTCAM ultima 1024 Manuel utilisateur

Photron

Photron FASTCAM SA8 Manuel utilisateur

Photron

Photron FASTCAM Multi Manuel utilisateur

Photron

Photron FAST Dock Manuel utilisateur

Photron

Photron FASTCAM Mini WX50 Manuel utilisateur

Photron

Photron Fastcam SA3 Manuel utilisateur

Photron

Photron Fastcam SA2 Manuel utilisateur

Photron

Photron FASTCAM Multi Manuel utilisateur

Photron

Photron Fastcam SA5 Manuel utilisateur

Photron

Photron FASTCAM MH6 Manuel utilisateur

Photron

Photron FASTCAM Mini AX100 Manuel utilisateur

Photron

Photron FASTCAM Mini WX50 Manuel utilisateur

Photron

Photron FASTCAM ultima APX-i2 Manuel utilisateur

Photron

Photron FASTCAM Mini Series Manuel utilisateur

Photron

Photron FASTCAM ultima SE Manuel utilisateur

Photron

Photron FASTCAM SA-X2 Manuel utilisateur

Photron

Photron FASTCAM Nova Manuel utilisateur

Photron

Photron Fastcam APX RS Mode d’emploi

Photron

Photron FASTCAM Mini GigabitEthernet Interface Manuel d'instructions

Photron

Photron FASTCAM SA-Z Manuel utilisateur

Photron

Photron Fastcam MC1 Manuel utilisateur

Photron

Photron FAST Drive Manuel utilisateur

Manuels Appareil photo numérique populaires d'autres marques

Mercury

Mercury 350K Manuel utilisateur

Pentax

Pentax Optio LS 465 Manuel utilisateur

Sanyo

Sanyo VPC-S1085 Manuel utilisateur

GE SMART A1255 Manuel utilisateur

Point Grey

Point Grey Gazelle Manuel utilisateur

Nikon

Nikon COOLPIX A Manuel utilisateur

Pentax

Pentax P-5 Manuel utilisateur

BlazeVideo

BlazeVideo A280 Manuel utilisateur

Sony

Sony MCA-20 Manuel utilisateur

Sony

Sony Alpha DSLR-A290 Manuel utilisateur

ATIK Cameras

ATIK Cameras One Manuel utilisateur

CohuHD Costar

CohuHD Costar 3930 Series Manuel utilisateur

Leica

Leica M10-R Manuel utilisateur

FujiFilm

FujiFilm FinePix A700 Manuel utilisateur

Lorex

Lorex LNZ81P25 Series Manuel utilisateur

GE J1470S Manuel utilisateur

Sony

Sony A6700 Guide de l'utilisateur

Canon

Canon EOS ELAN7 Manuel utilisateur