Phoenix SS1160F Fiche d'information produit

Ph Sf Cpny r eac n s gurte

FIRST OPENING ON FACTORY DEFAULT CODE

Factory code is 1 2 3 4 5 6

1. Touch the screen, to activate (1 bleep and screen illuminates).

2. Enter the user code (1st time usage 123456).

3. Touch OPEN, a melodic tone will sound and the display will

show OPEnd.

4. Turn handle counter clockwise and open the door while the

tone is sounding.

CAUTION

I. If an incorrect code is entered, Error will appear in the display

panel and a short warning tone will sound.

II. If a wrong code is entered 5 times the lock will cease to oper-

ate for 5 minutes. During which a warning tone will sound and

the display will indicate deLAY.

SETTING A NEW USER CODE

Set a new code with the door open and test the new code before

closing the door.

1. Touch the screen to activate

2. Touch ENTER

3. Type in the present code

4. Touch ENTER

5. Type in the new 4 – 16 digit code

6. Touch ENTER, a melodic tone will sound and the display will

show EntErd

For example:

If the present code is 1 2 3 4 5 6 and a new four digit code is

decided as 4 2 4 2 enter the following –

ENTER >1 2 3 4 5 6 > ENTER > 4 2 4 2 >ENTER

EntErd will show in the display and a short tone will sound to

conrm the change to 4 2 4 2

INTRODUCING A FINGERPRINT

Open the door using the user code. Keep the door open while

carrying out this process.

1. Press the Mbutton on the back of door, the screen will be

activated

2. Press 3on the screen

3. Press ENTER

4. Enter the user code and press ENTER

5. Scan in the ngerprint twice

consecutively, by placing the

nger on the sensor. The screen

will show EntErd a melody will

sound.

NOTE: Check the nger print had

been set correctly following -

How to open with a ngerprint.

• A total of 128 nger prints can be

introduced into the lock.

HOW TO OPEN WITH A FINGERPRINT

1. Touch the screen to activate

2. Scan the ngerprint on the sensor, the screen will show

OPEnd and a melody will sound.

3. Turn the handle counter clockwise and open the door while the

tone is sounding.

CAUTION

I. If an incorrect ngerprint is scanned, ErrOr will appear in the

display and a short warning tone will sound.

II. If a wrong ngerprint is scanned 5 times the lock will cease to

operate for 5 minutes. During which a warning tone will sound

and the display will indicate deLAY.

V1 JUL 2018

Battery Case

Hold the upper part and turn it counter-clockwise to

disassemble (1,5V AA Alkaline 4 pcs)

Upper part Lower part

Reset Button

Upper

part

Lower

part

Securing

Hole

Memory Button

Door back or Top drawer back

Put Finger-print twice

While red lamp flickering,

put user’s finger on sensor.

2After Bi- sound,

repeat the above 1

SS1160F OPERATING INSTRUCTIONS

& GUARANTEE REGISTRATION

Ph Sf Cpny r eac n s gurte

HOW TO DELETE REGISTERED FINGERPRINTS

1. Press the Mbutton on the back of the door, the screen will be

activated.

2. Press ENTER

3. Press 3

4. Press ENTER, the display will show CLEAr and a melody will

sound.

NOTE: All ngerprints are deleted

DUAL LOCKING (2 CODES REQUIRED TO OPEN THE

SAFE)

Set up a 2nd user code

Press the Mbutton, touch number 2, touch ENTER, type in the

numbers required for the code and touch ENTER. The screen will

show EntErd

M >2 > Enter > 2nd Code >Enter

Activate / Deactivate Dual Locking

Press the Mbutton touch number 9, touch ENTER. The screen

will show dUAL – to indicate dual locking has been activated or

5in9LE to indicate the lock has been reverted to single locking.

M > 9> Enter

To Open While in Dual Mode

1. Touch the screen to activate

2. Type in the 1st user code

3. Touch OPEN

4. Type in the 2nd user code

5. Touch OPEN

6. The screen will show OPEnd

NOTE: In dual mode it is not possible to open using a nger-

print.

TO HIDE CODE IN THE DISPLAY AND TURNOFF

KEYPAD SOUND

To activate and deactivate –

Press memory button M on the back of the door touch number 7,

touch ENTER. The display will show hidE or CLEAr

M > 7 > Enter

SCRAMBLE NUMBERS

The code can be disguised by inserting random numbers either

before, after, or both before and after, the user code. This feature

can also be used with the hidden code display and silent keypad

as above.

For example – personal code has been set as 4 2 4 2

1. Touch the screen to activate

2. Enter the user code as 61 4 2 4 2 75391

3. Touch OPEN

The display will show OPEnd

ALARM SETTING

The alarm can be set before closing the door and will automati-

cally be deactivated when the personal code is entered.

TO SET THE ALARM

Press the Mbutton on the back of the door touch number 8, touch

ENTER. The display will show ALErT

M >8 >Enter

If the safe is tilted over 45° or impacted, the alarm will sound if it

has been activated.

RESET

If the display does not respond, press the reset button on the

inside of the display casing to reset the lock. The registered codes

and nger prints will not be deleted.

BATTERY LIFE

6 months if the lock is accessed 3 times a day.

The batteries must be replaced if –

1. When touching the screen, LobAtt appears on the display.

2. The battery icon appears in the display.

3. Correct code or ngerprint entered but the door will not open.

* Even if the batteries are completely exhausted, the codes

are not lost.

BATTERIES

4 X 1.5v AA Alkaline Batteries (supplied) are required

to activate the lock. Used batteries should not be

disposed of with normal domestic waste. These should

be disposed of at approved collection points. You may

also return used batteries to your Retailer at their expense (where

applicable).

SS1160F OPERATING INSTRUCTIONS

& GUARANTEE REGISTRATION

Ph Sf Cpny r eac n s gurte

BASE FIXING FOR THE SS1160F SERIES

Thank you for purchasing a Phoenix Safe. Your safe is ready

prepared for base xing / rear xing (dependent on the model

purchased), with xing bolts for concrete supplied.

To x your safe, follow the instructions to the below, using the

dimensions in the table.

DIMENSION OF

THE ANCHOR

BOLT

LENGTH OF

THE ANCHOR

BOLT (L), MM

DIAMETER

OF THE DRILL

BIT (D), MM

DEPTH TO

DRILL (M), MM

MINIMUM

DEPTH TO

INSERT THE

BOLT (H), MM

M12/180mm 180 12 150 81

Drill the hole according to the dimensions (C&D)

Insert the anchor bolt through the base of the safe

and tap down using with the help of a hammer.

Screw the anchor bolt until it will tighten no further.

Clean the hole with a brush to remove debris.

GUARANTEE REGISTRATION

Please submit your guarantee registration by visiting our website

www.phoenixsafe.com and clicking on guarantee registration.

For further assistance or information

please contact us on 0151 944 6444.

APEX HOUSE, 1 ORRELL MOUNT, LIVERPOOL, L20 6NS,

UNITED KINGDOM | +44 (0)151 944 6444

SS1160F OPERATING INSTRUCTIONS

& GUARANTEE REGISTRATION

Autres manuels Phoenix Sûr

Phoenix

Phoenix DS2500K Manuel utilisateur

Phoenix

Phoenix FS1610K Fiche d'information produit

Phoenix

Phoenix FS2230K Series Manuel utilisateur

Phoenix

Phoenix SS1180K Manuel utilisateur

Phoenix

Phoenix NESO SS0200F Series Manuel utilisateur

Phoenix

Phoenix FS0430E Series Manuel utilisateur

Phoenix

Phoenix SS0935E Series Manuel utilisateur

Phoenix

Phoenix COSMOS HS9070 Fiche d'information produit

Phoenix

Phoenix SS1190E Citadel Manuel utilisateur

Phoenix

Phoenix Venus Manuel utilisateur

Phoenix

Phoenix FS1270E Series Manuel utilisateur

Phoenix

Phoenix SS1190E Series Manuel utilisateur

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Phoenix

Phoenix Mercury HS2050 Manuel

Phoenix

Phoenix GS8010K Fiche d'information produit

Phoenix

Phoenix SS0992E Manuel utilisateur

Phoenix

Phoenix SS0720E Series Manuel utilisateur

Phoenix

Phoenix GS8000K Fiche d'information produit

Phoenix

Phoenix VENUS HS0650 Fiche d'information produit

Phoenix

Phoenix FIRECHIEF FS1650 Fiche d'information produit

Phoenix

Phoenix FIRE COMMANDER FS1910E Manuel utilisateur

Phoenix

Phoenix KS0030E Manuel utilisateur

Phoenix

Phoenix SS0987E Series Manuel utilisateur

Phoenix

Phoenix FS0352C Fiche d'information produit

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi

Ankaro

Ankaro ANK EZ I Manuel utilisateur

Intratone

Intratone KEY SAFE Mode d’emploi

Costway

Costway HW50956 Manuel utilisateur

Megasat

Megasat K Series Manuel utilisateur

ECOSAFE

ECOSAFE 3030ARD Manuel utilisateur