Phoenix SPECTRUM LS6000 Manuel utilisateur

SPECTRUM

LS6000

Operating

Instructions

Contents Page

1 Batteries 3

2 Opening 4

3 Setting User Code 4

4 Locking 5

5 LED Light 5

6 Multi-user mode & Dual-user mode 6

7 Changing Door Panel 7

Contents

FOR SAFETY

Prior to using the safe, please read the instructions carefully.

Cautions when placing the safe.

The safe is heavy and should be handled very carefully.

Never move the safe with the door open.

Place the safe on at oor.

Cautions when using the safe.

Be careful not to slam the door closed.

Be careful not to trap hands or ngers when closing door.

As the safe is heavy and operated with a smart digital lock, it is not recommended

that children operate the safe.

Be careful not to forget the user code, and keep the instruction outside of the safe.

Components

Prior to using safe, install 4pcs of AA alkaline batteries.

(LED ickers, Bi Bi Bi sound, Melody rings for 1 second)

* Non-alkaline and rechargeable batteries are not

recommended.

The batteries need to be replaced when ‘Bi-ric’ sound is

emitted when any button is pressed.

Replace all 4 batteries at the same time.

* Battery life span : 1 year (Average openings 3 times a day)

* When the batteries are replaced, the registered user code is

not erased.

* Note: If the door does not open in spite of the correct user

code being entered, please change the batteries before calling

for service.

Instructions Drawer Shelf Shelf Clips

(4pcs)

1.5V Alkaline

AA Batteries

(4pcs)

Memory Button

LEDLight

Digital Lock

Door Panel

1. Batteries

2. Opening

NOTE: If wrong code is tried, Red LED ickers sounding Bi Bi Bi Bi.

Paralysis: If a wrong code is entered 5 times, the lock will be paralyzed for 5 minutes

Remaining paralysis time can be checked via the LED.

Eg) In the case of 4 minutes remaining, LED ickers 4 times every 10 seconds.

Scramble Numbers: The code can be disguised by inserting random numbers either before, after

or both before and after the user code. E.g. user code of 1234, xxx1234, 1234xxx or xxx1234xxx.

Total of 32 numbers can be accepted.

Mute sound: You can hide the button sound.

SET: M 7 #

UNSET: M # 7 #

3. Set User Code

NOTE: 1) Prior to closing the door, check the new code has been registered correctly by

following 2. Opening.

2) It is not recommended to use codes such as a telephone numbers, birthday or

consecutive numbers for security reasons.

1 ) Press C Button

(Bi sound, LED ickers)

2 ) Enter User Code

(LED ickers, Bi sound)

(Factory Code 1 2 3 4)

3 ) Press # Button

(Melody rings)

4 ) Open the door

1 ) Press MButton on the back of the door. 2 ) Enter New Code

(4 ~16 digits)

3 ) Press #Button.

(Melody rings)

Keep the door open.

4. Locking

NOTE: 1) Don’t close the door with the bolts in the locked position.

2) If door is unlocked when #button pressed, red LED turns on sounding Bi Bi Bi Bi.

- Door may not be closed because of over inside matters.

Door open alert: If the door is not locked within 1 minute after opening, an alert will sound for

30 seconds.

5. LED Light

1) Close the door 2 ) Press # Button

(LED ickers with melody)

LED turns on for 15 seconds, each time the Cbutton is pressed.

6. Multi-user mode & Dual-user mode

Multi-user mode

Multi-user mode: Two users can independently open the safe with their own user code.

Dual-user mode: Two different codes should be entered consecutively to open the safe.

* Both modes can not be used simultaneously.

SET: M 2 # 2nd Code #

NOTE: 1) Prior to closing the door, conrm the 2nd code has been registered correctly by

following 2. Opening

2) 2nd code can be changed in the same way as Multi-user mode > set .

3) For setting or changing 1st code, please do as shown in 3. Setting User Code .

UNSET: M # 2 #

NOTE: When unsetting multi user codes the 2nd code is removed automatically. The 1st code

will be retained.

OPEN: C 1st Code or 2nd Code # Open the door

Dual-user mode

SET: M 9 # 2nd Code #

NOTE: 1) Prior to closing the door, conrm the ngerprint has been registered correctly as

shown in 2. Opening

2) 2nd code can be changed in the same way as the initial set up Dual-user mode > SET

3) For setting or changing the 1st code, please follow the instructions in 3. Set User

Code.

UNSET: M # 9 #

NOTE: When unsetting dual mode, the 2nd code is removed automatically. The 1st code will be

retained.

OPEN: C 1st Code # 2nd Code # Open the door

7. Changing Door Panel

When changing the panel please take care not to trap ngers in between the panel and door

frame. It is recommended when replacing the panel with a new one, to wear gloves.

1 ) Hold and adjust the panel to allow the

position guide to locate into the xing hole.

2 ) Push the panel into the door frame to

attach.

1 ) Place a nger into the hinge hole on upper

right side of door frame and push the panel

outwards to detach.

2 ) Lift the panel up to detach.

DETACH PANEL

ATTACH PANEL

Need support?

We’re here if you need us.

Web www.phoenixsafe.co.uk

Email [email protected]

Phone 0151 944 6444

Where peace of mind

is guaranteed.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Phoenix Sûr

Phoenix

Phoenix Dream Series Manuel utilisateur

Phoenix

Phoenix FS2250K Series Manuel utilisateur

Phoenix

Phoenix SS0935E Series Manuel utilisateur

Phoenix

Phoenix Diamond Deposit HS1090ED Manuel utilisateur

Phoenix

Phoenix Fire Fox SS1621E Manuel utilisateur

Phoenix

Phoenix FS2230K Series Manuel utilisateur

Phoenix

Phoenix SS1190E Series Manuel utilisateur

Phoenix

Phoenix SS1190E Citadel Manuel utilisateur

Phoenix

Phoenix Neptune HS1050 Fiche d'information produit

Phoenix

Phoenix NEXT PLUS LS7010 Manuel utilisateur

Phoenix

Phoenix FS0352C Series Manuel utilisateur

Phoenix

Phoenix DIONE SS0313E Manuel utilisateur

Phoenix

Phoenix KS0030E Series Manuel utilisateur

Phoenix

Phoenix FS1650E Fiche d'information produit

Phoenix

Phoenix VENUS HS0656 Fiche d'information produit

Phoenix

Phoenix FIRECHIEF FS1650 Fiche d'information produit

Phoenix

Phoenix NEPTUNE HS1056 Fiche d'information produit

Phoenix

Phoenix FORTRESS II SS1182E Fiche d'information produit

Phoenix

Phoenix SS0935E Series Manuel utilisateur

Phoenix

Phoenix FS1510E Series Manuel utilisateur

Phoenix

Phoenix SS0100E Fiche d'information produit

Phoenix

Phoenix GS8000K Fiche d'information produit

Phoenix

Phoenix KS0030E Manuel utilisateur

Phoenix

Phoenix PS600 Manuel utilisateur

Manuels Sûr populaires d'autres marques

Squire

Squire Stronghold Keysafe Manuel utilisateur

Vaultek

Vaultek 10 Series Fiche technique

Arregui

Arregui CLASS Manuel utilisateur

Beaumont

Beaumont SMART KEYBOX Manuel utilisateur

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur

Hornady

Hornady SnapSafe Trunk Safe II Manuel utilisateur

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Manuel utilisateur

Honeywell

Honeywell 5912 Manuel utilisateur

Technomax

Technomax Trony Series Manuel

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Manuel utilisateur

RICHTER CZECH

RICHTER CZECH LA Manuel d'utilisation

Olymp

Olymp GOsafe 110 Manuel utilisateur

Clarke

Clarke Strong-Arm CS1000K Mode d’emploi

Ankaro

Ankaro ANK EZ I Manuel utilisateur

Intratone

Intratone KEY SAFE Mode d’emploi

Costway

Costway HW50956 Manuel utilisateur

Megasat

Megasat K Series Manuel utilisateur

ECOSAFE

ECOSAFE 3030ARD Manuel utilisateur