Phoenix Contact FL SWITCH GHS 4G/12 Manuel utilisateur

AUTOMATION

UM QS EN FL SWITCH GHS for

FL SWITCH GHS 12G/8

FL SWITCH GHS 4G/12

Quick Start Guide

Order No.: -

Gigabit Modular Switch

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

Designation:

Revision:

Order No.:

This user manual is valid for:

2010-03-03

AUTOMATION

8042_en_00 PHOENIX CONTACT

Quick start guide for access to the web-based management of the Gigabit Modular Switch

UM QS EN FL SWITCH GHS

—

Designation Revision Order No.

FL SWITCH GHS 2989200

FL SWITCH GHS 4G/12 2700271

FL FXT 2989307

Quick start guide

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

FL SWITCH GHS

PHOENIX CONTACT 8042_en_00

Please observe the following notes

In order to ensure the safe use of the product described, you have to read and understand

this manual. The following notes provide information on how to use this manual.

User group of this manual

The use of products described in this manual is oriented exclusively to qualified electricians

or persons instructed by them, who are familiar with applicable national standards and other

regulations regarding electrical engineering and, in particular, the relevant safety concepts.

Phoenix Contact accepts no liability for erroneous handling or damage to products from

Phoenix Contact or third-party products resulting from disregard of information contained in

this manual.

Explanation of symbols used and signal words

The following types of messages provide information about possible property damage and

general information concerning proper operation and ease-of-use.

This is the safety alert symbol. It is used to alert you to potential personal injury

hazards. Obey all safety measures that follow this symbol to avoid possible

injury or death.

DANGER

This indicates a hazardous situation which, if not avoided, will result in death or serious

injury.

WARNING

This indicates a hazardous situation which, if not avoided, will result in death or serious

injury.

CAUTION

This indicates a hazardous situation which, if not avoided, could result in minor or

moderate injury.

NOTE

This symbol and the accompanying text alerts the reader to a situation which may cause

damage or malfunction to the device, either hardware or software, or surrounding

property.

This symbol and the accompanying text provides additional information to the reader. It is

also used as a reference to other sources of information (manuals, data sheets, literature)

on the subject matter, product, etc.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

8042_en_00 PHOENIX CONTACT

General terms and conditions of use for technical documentation

Phoenix Contact reserves the right to alter, correct, and/or improve the technical

documentation and the products described in the technical documentation at its own

discretion and without giving prior notice, insofar as this is reasonable for the user. The

same applies to any technical changes that serve the purpose of technical progress.

The receipt of technical documentation (in particular data sheets, installation instructions,

manuals, etc.) does not constitute any further duty on the part of Phoenix Contact to furnish

information on alterations to products and/or technical documentation. Any other

agreement shall only apply if expressly confirmed in writing by Phoenix Contact. Please

note that the supplied documentation is product-specific documentation only and that you

are responsible for checking the suitability and intended use of the products in your specific

application, in particular with regard to observing the applicable standards and regulations.

Although Phoenix Contact makes every effort to ensure that the information content is

accurate, up-to-date, and state-of-the-art, technical inaccuracies and/or printing errors in

the information cannot be ruled out. Phoenix Contact does not offer any guarantees as to

the reliability, accuracy or completeness of the information. All information made available

in the technical data is supplied without any accompanying guarantee, whether expressly

mentioned, implied or tacitly assumed. This information does not include any guarantees

regarding quality, does not describe any fair marketable quality, and does not make any

claims as to quality guarantees or guarantees regarding the suitability for a special purpose.

Phoenix Contact accepts no liability or responsibility for errors or omissions in the content

of the technical documentation (in particular data sheets, installation instructions, manuals,

etc.).

The aforementioned limitations of liability and exemptions from liability do not apply, in so

far as liability must be assumed, e.g., according to product liability law, in cases of

premeditation, gross negligence, on account of loss of life, physical injury or damage to

health or on account of the violation of important contractual obligations. Claims for

damages for the violation of important contractual obligations are, however, limited to

contract-typical, predictable damages, provided there is no premeditation or gross

negligence, or that liability is assumed on account of loss of life, physical injury or damage

to health. This ruling does not imply a change in the burden of proof to the detriment of the

user.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

FL SWITCH GHS

PHOENIX CONTACT 8042_en_00

Statement of legal authority

This manual, including all illustrations contained herein, is copyright protected. Use of this

manual by any third party is forbidden. Reproduction, translation, and public disclosure, as

well as electronic and photographic archiving or alteration requires the express written

consent of Phoenix Contact. Violators are liable for damages.

Phoenix Contact reserves all rights in the case of patent award or listing of a registered

design. Third-party products are always named without reference to patent rights. The

existence of such rights shall not be excluded.

How to contact us

Internet Up-to-date information on Phoenix Contact products and our Terms and Conditions can be

found on the Internet at:

www.phoenixcontact.com

Make sure you always use the latest documentation.

It can be downloaded at:

www.phoenixcontact.net/catalog

Subsidiaries If there are any problems that cannot be solved using the documentation, please contact

your Phoenix Contact subsidiary.

Subsidiary contact information is available at www.phoenixcontact.com.

Published by

Should you have any suggestions or recommendations for improvement of the contents and

layout of our manuals, please send your comments to

tecdoc@phoenixcontact.com

PHOENIX CONTACT GmbH & Co. KG

Flachsmarktstraße 8

32825 Blomberg

Germany

Phone +49 - (0) 52 35 - 3-00

Fax +49 - (0) 52 35 - 3-4 12 00

PHOENIX CONTACT

P.O. Box 4100

Harrisburg, PA 17111-0100

USA

Phone +1-717-944-1300

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

Table of contents

8042_en_00 PHOENIX CONTACT i

Table of contents

1 Mounting and installing the Gigabit Modular Switch ................................................................1-1

1.1 Mounting the head station ..................................................................................1-1

1.2 Mounting of the extension module......................................................................1-2

1.3 Installing the GHS...............................................................................................1-3

1.3.1 Connecting the supply voltage to the GHS .........................................1-3

1.4 Operability of the GHS........................................................................................1-4

1.5 Activating the default IP address ........................................................................1-4

1.6 Assigning IP parameters.....................................................................................1-5

1.6.1 Assigning IP parameters with IPAssign ...............................................1-5

1.7 Making contact between the GHS and PC for initial configuration......................1-7

1.7.1 Operation with static IP addresses ......................................................1-7

1.7.2 Requirements for the use of WBM ......................................................1-8

1.8 Web-based management ...................................................................................1-9

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

FL SWITCH GHS

ii PHOENIX CONTACT 8042_en_00

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

Mounting and installing the Gigabit Modular Switch

8042_en_00 PHOENIX CONTACT 1-1

1 Mounting and installing the Gigabit Modular Switch

1.1 Mounting the head station

Mount the head station on a clean DIN rail according to DIN EN 50 022 (e.g., NS 35 ... from

Phoenix Contact). To avoid contact resistance only use clean, corrosion-free DIN rails. Fix

the DIN rail tightly and secure it against twisting to avoid damaging the switch in applications

with a high level of mechanical strain (strong vibrations or shocks). When using "NS 35..."

rails with heavy loads, fix/screw the rails at a distance of about 75 mm.

Before mounting the modules, an end clamp (E/AL-NS 35, Order No. 1201662) should be

mounted on the left-hand side next to the head station to stop the modules from slipping on

the DIN rail. After installation of the modules, install one of the above end clamps to the right

of the station.

Assembly:

1. Place the module onto the DIN rail from above (A). The upper holding keyway must be

hooked onto the top edge of the rail. Push the module from the front towards the

mounting surface (B).

Figure 1-1 Snapping the head station onto the DIN rail

2. Once the module has been snapped on properly, check that it is fixed securely on the

rail. Check whether the positive latches are facing upwards, i.e., snapped on correctly.

Unless otherwise expressly stated, all information provided in this user manual always

applies to both the FL SWITCH GHS 12G/8 and the FL SWITCH GHS 4G/12.

NOTE: Always switch off the supply voltage when mounting/removing the head station

and extension modules.

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

FL SWITCH GHS

1-2 PHOENIX CONTACT 8042_en_00

1.2 Mounting of the extension module

Mounting:

1. Place the module onto the DIN rail from above (A). The upper holding keyway must be

hooked onto the top edge of the rail. Push the module from the front towards the

mounting surface (B). Check that the positive latches have snapped on properly.

Figure 1-2 Mounting extension modules

2. Now that the extension module is snapped onto the DIN rail, push it along the DIN rail

towards the head station (A), until the male connector/female connector of the modules

are interlatched and the sides of the modules lie flush with one another. Secure the

connection using the two screws (B).

Figure 1-3 Mounting extension modules

NOTE: Always switch off the supply voltage when mounting/removing the extension

module.

MAC

Address

Ord.No. 29 89 200

X29

MEM

FL SWITCH GHS 12G/8

X10

X12

X11

X1 X3

X2 X4

X30 X31US1 UIGND GNDI

GND DI2

MODE

LNK

X1 59

GNDI R2 R4 V.24

RESET

DI1

US1

US2

FAIL

DI2 UI

US2 DI1UI R1 R3 X32

RSPSupply - 1-888-532-2706 - www.RSPSupply.com

http://www.RSPSupply.com/p-14161-Phoenix-Contact-2700271-FL-SWITCH-GHS-4G/12-Modular-Ethernet-Switch.aspx

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Phoenix Contact Changer

Phoenix Contact

Phoenix Contact FL SWITCH 2206-2FX ST Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH SMN 6TX/2FX Guide de démarrage rapide

Phoenix Contact

Phoenix Contact 1708 M12 POE Manuel utilisateur

Phoenix Contact

Phoenix Contact 1001T-4POE Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 16TX Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL EP74 Series Manuel utilisateur

Phoenix Contact

Phoenix Contact IRT Series Manuel utilisateur

Phoenix Contact

Phoenix Contact FL SWITCH EP74 Series Manuel d'instructions

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 14TX/2FX Guide de démarrage rapide

Phoenix Contact

Phoenix Contact PSR-CT Series Manuel utilisateur

Phoenix Contact

Phoenix Contact FL SWITCH SFN 5TX-24VAC Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH GHS 12G/8 Manuel utilisateur

Phoenix Contact

Phoenix Contact ILC 131 ETH Schéma de câblage

Phoenix Contact

Phoenix Contact FL SWITCH SFN 5GT Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 8TX Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH 2000 Series Manuel d'installation

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 8TX Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 16TX Manuel utilisateur

Phoenix Contact

Phoenix Contact 1001T-4POE-GT-SFP Guide de démarrage rapide

Phoenix Contact

Phoenix Contact SWITCH 1008E Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH SMCS 8TX Guide de démarrage rapide

Phoenix Contact

Phoenix Contact FL SWITCH SFNT 5GT Guide de démarrage rapide

Phoenix Contact

Phoenix Contact IEC 61850 Manuel utilisateur

Phoenix Contact

Phoenix Contact FL SWITCH 2005 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur