Philips LDS Series Manuel utilisateur

LDS Series

DIE CAST ALUMINUM LED EXIT

Page 1 of 2

Job Information Type:

Job Name:

Cat. No.:

Notes:

Features

Illumination: Illumination of

the stencil face is accomplished

with long-lasting, high-output

Light Emitting Diodes (LEDs).

Hot spots and striations are

eliminated by the internal “light

chamber” allowing for even

illumination in normal and

emergency situations.

Housing: Rugged die cast

aluminum housing, backplate,

faces and canopy. Exits are

painted with a durable powder

coat and available in a black

frame with brushed aluminum

stencil face, black frame with

black stencil face, or white

frame with white stencil face.

Operating Temperature

Range:

65°F (19°C) to 85°F (30°C)

Diagnostic Electronics

(standard): 120/277 VAC,

60 Hz, dual voltage input.

Solid state circuitry is surge-

protected and provides for

a reliable charging system.

Standard features include

low voltage disconnect, labor

saving AC lockout, brownout

protection and instantaneous

transfer.

Self-Testing Diagnostics

(optional): The diagnostics

routine is activated upon the

presence of AC power to

ensure proper installation

and initialization. Continuous

monitoring of the systems

critical components include:

battery disconnect/failure,

charger failure, LED failure,

AC line voltage monitoring

and transfer circuit failure.

Fault/service monitoring is

accomplished via a dual color

LED on the outside of the unit

so there is no need to open

the fixture if trouble shooting

is needed. The self-test

routine satisfies the exception

clause for periodic testing

requirements of NFPA 101 and

automatically tests the unit for

one minute every thirty days

and 90 minutes annually.

Electrical Specifications:

AC Only Red and Green:

0.026 A (120 VAC)

0.012 A (277 VAC)

Self-Powered Red and Green:

0.033 A (120 VAC)

0.017 A (277 VAC)

Code Compliance

UL 924 listed. NFPA 101,

NEC, BOCA, OSHA and IBC

illumination standards.

Warranty

Five year full warranty.

13.38"

(33.97 cm)

8.5"

(21.59 cm)

LDSNURW

9.125"

(23.18 cm)

12.75"

(32.38 cm)

2.0"

(5.08 cm)

LDS Series

DIE CAST ALUMINUM LED EXIT

Page 2 of 2

Philips Lightolier

e: [email protected]

t: (508) 679-8131

w: www.lightolier.com

LDS Series August 11, 2011

Specifications are subject to change without notice.

Job Information Type:

Ordering Information

Series

LDS = Die Cast

Aluminum LED Exit

SD = Self-Testing Diagnostics1

Factory Installed Options

A= AC Only

N= Self-Powered

Battery

A= Natural Brushed Aluminum

Face w/ Black Housing

B= Black Stencil Face w/ Black

Housing

W= White Stencil Face w/

White Housing

Stencil Face/Housing Color

LDS

U= Universal, 2 Faces

Backplate and Canopy

Stencil Faces

R= Red

G= Green

Letter Color

Note

1) SD available on nickel cadmium models only and only as universal.

2) Custom pendant lengths and colors available, consult factory.

Accessories (order as a separate item)

PKIT12W2= Pendant Kit, 12” White Finish

PKIT12B2= Pendant Kit, 12” Black Finish

Ce manuel convient aux modèles suivants

Autres manuels Philips Lampe de travail

Philips

Philips LD Series Manuel utilisateur

Philips

Philips E6 Series Manuel utilisateur

Philips

Philips GreenPower LED series Manuel utilisateur

Philips

Philips C2 Series Manuel utilisateur

Philips

Philips Lightolier Skyway SKSGPK228 Manuel utilisateur

Philips

Philips Xperion 3000 Zoom Manuel utilisateur

Philips

Philips MasterColor P-5496-E Manuel utilisateur

Philips

Philips LivingColors 6917330PH Manuel utilisateur

Philips

Philips LivingColors SA1307-120060EU Manuel utilisateur

Philips

Philips MJ series Manuel utilisateur

Philips

Philips Xperion 3000 Pocket Manuel utilisateur

Philips

Philips RCH20 Manuel utilisateur

Philips

Philips LivingColors 6950230PH Manuel utilisateur

Philips

Philips PL-L Manuel utilisateur

Philips

Philips LivingColors 6917167PU Manuel utilisateur

Philips

Philips LivingColors 6916660PH Manuel utilisateur

Philips

Philips LivingColors 6917155PH Manuel utilisateur

Philips

Philips 220-230-240V Manuel utilisateur

Philips

Philips Xitanium Xitanium Manuel utilisateur

Philips

Philips LivingColors 6914848PU Manuel utilisateur

Philips

Philips LivingColors 6950060PU Manuel utilisateur

Philips

Philips GreenPower LED series Manuel utilisateur

Philips

Philips LivingColors 6917130PH Manuel utilisateur

Philips

Philips Ledino 66704/30/16 Manuel utilisateur

Manuels Lampe de travail populaires d'autres marques

ANSMANN

ANSMANN POWERLIGHT 5.1 Manuel utilisateur

RTRMAX

RTRMAX RTX1868 Manuel utilisateur

FeinTech

FeinTech LAL00220 Manuel utilisateur

Bunker Hill Security

Bunker Hill Security 64735 Manuel utilisateur

Goobay

Goobay 30450 Manuel utilisateur

REV Ritter

REV Ritter SPOT Manuel utilisateur

Ignition

Ignition Stagepix Line 100 IP Manuel utilisateur

SCANGRIP

SCANGRIP DUO CONNECT Manuel utilisateur

Bosch

Bosch GLI 18 V Manuel utilisateur

Bayco

Bayco SL-1514 Manuel utilisateur

EUFAB

EUFAB SMD LED 8+1 Manuel utilisateur

DeWalt

DeWalt DCL510 Manuel utilisateur

PowerSmith

PowerSmith PWLD080T Manuel utilisateur

MaxLite

MaxLite 73683 Manuel utilisateur

Heitronic

Heitronic Trend 27867 Manuel utilisateur

Monzana

Monzana Gore MZCL10 Manuel utilisateur

EINHELL

EINHELL TE-CL 18/2000 LiAC Manuel utilisateur

Bayco

Bayco NIGHTSTICK Dual-Light Xtreme Lumens... Manuel utilisateur