Philips 26HF7875/10 Manuel utilisateur

Philips Professional and Business Solutions

26HF7875

26HF5445

32HF7875

32HF5445

42HF7845

User Manual

Contents ................................................ 1

Introduction .......................................... 2

Kensington Security Slot ..................... 2

Safety ..................................................... 3

Troubleshooting ................................... 4

Getting started ..................................... 6

Mounting the TV on a wall...........................6

Connecting the aerial and mains.................6

Putting batteries in the remote control ....6

Overview of TV Connectors and

Controls ................................................ 7

Remote Controls .................................. 8

RC2886 ............................................................. 8

Guest Remote Control Keys ............... 9

Overview of TV Setup Main Menu /

Sub-Menus ........................................... 11

Overview of TV Setup Main Menu /

Sub-Menus ........................................... 12

Accessing the Setup Menu ................ 13

Installation ......................................... 14

A. Selecting the language ............................14

B. Selecting your Communication Source

..........................................................................14

C. Defining the number of available

channels ..........................................................15

D. Installing the Programmes.....................15

E. Specifying and Configuring the settings

and options ...................................................19

F. Setting up the TV Clock........................31

Cloning the TV and the SmartLoader

configuration ....................................... 34

Contents

Installing a System SmartCard or

System Box ......................................... 35

Diagnosing Basic Problems ............... 37

Appendix A – Multi Remote Controls

Support ............................................... 39

Appendix B – Resolutions Table ....... 40

Environmental Information .............. 41

Information for Users in the UK ...... 42

Introduction

Congratulations on your purchase and

welcome to Philips!

This manual contains information about how

to install and operate your TV.

If you still have problems after reading

this manual, call your Local Philips Customer

or Service Centre. The telephone numbers

and addresses are given in the worldwide

guarantee booklet supplied with the TV.

Product information

The model and serial number can be found

at the rear of the TV, on left side of the TV,

and on the packaging

Kensington Security Slot

(if present)

Your TV is equipped with a Kensington

Security Slot, to prevent it from getting

stolen. An anti-theft Kensington lock has to

be purchased separately. The Kensington

lock is a plastic-coated steel cable with a

lock. One end has to be fixed to the opening

of the TV and locked with a special key. The

other end is attached to a fixed point.

® Kensington and MicroSaver are

registered US trademarks of ACCO World

Corporation with issued registrations and

pending applications in other countries

throughout the world. All other registered

and unregistered trademarks are the

property of their respective owners.

Do not touch any part of the TV, power

lead, or aerial lead during lightning

storms.

Do not leave the TV in stand-by mode

for an extended period of time. Instead,

disconnect the TV from the mains.

The TV set is always connected to the

mains. You can disconnect the TV from

the mains by doing one of the following

tasks:

• unplugging the mains cord located at

the back of TV set

• unplugging the mains plug from the

mains socket outlet

Pull the power cord by the plug - do not

pull on the power cord.

Ensure that you always have easy access

to the mains cord or the mains plug to

disconnect the TV from the mains.

Ensure the power cord is fully inserted

into the TV mains socket and the wall

socket.

If the TV is mounted on a swivel base

or swivel arm, ensure no strain is placed

on the power cord when the TV is

swivelled. Strain on the power cord can

loosen connections and cause arcing or

ﬁre.

Verify that the mains supply voltage in

your home corresponds to the voltage

printed on the sticker at the rear of the

TV.

10.

11.

12.

13.

14.

15.

Safety

Two people are required to lift and

carry a TV that weighs more than 25

kilograms. Improper handling of the TV

can cause serious injury.

If you place the TV set on a solid surface,

ensure the surface is level and that it can

withstand the weight of the TV.

Mounting the TV on the wall requires

special skill that should only be

performed by a qualiﬁed personnel.

You should not attempt to do the work

yourself. Philips bears no responsibility

for improper mounting or mounting that

results in accident or injury.

This TV is compatible with the VESA

wall mounting standard. Please contact

your local electronics supplier for a

VESA compliant bracket to wall mount

this TV. Before you mount your TV on a

wall, ensure the wall is suitable to carry

the weight of the TV.

Wherever you place or mount the

TV, ensure that air can circulate freely

through the ventilation slots. Do not

place the TV in a conﬁned space.

Do not place naked ﬂame sources such

as lighted candles close to the TV.

Do not expose the TV or the batteries

of the remote control to heat, direct

sunlight, rain, or water.

Do not place vessels ﬁlled with water on

top of or near to the TV. Spilling water

into the TV can result in electric shock.

If you spill water into the TV, do not

operate the TV.

Immediately disconnect the TV from

the mains and have the TV checked by a

qualiﬁed technician.

Troubleshooting

If you are experiencing problems, check this list of symptoms and suggested steps to take

before requesting service. You may be able to solve the problem yourself.

Note: Please be familiar with the commercial features as described in the TV installation. The effects

of several of these features if not thoroughly understood might appear as faulty operation.

Symptoms Possible Solutions

Installation TV does not

respond to

commands of the

Setup Remote

Control

Check the button on the left hand side of the remote

control must be in the SETUP location (see page 13).

•

TV does not

respond to the

Guest Remote

Control

Check if YES is selected in the Remote Control Lock

feature. Select NO if YES is selected (see page 23)

•

Unable to enter

Setup menu via

Guest Remote

Control

Use the Green Remote Control (RC2573) to access

Setup menu to reset SECURITY setting (see page 22).

•

Picture No picture Check that the antenna / cable is connected

properly at the rear of the TV.

Check picture adjustments (brightness, contrast,

colour, tint).

Possible TV station problem. Try another channel.

Ensure VIDEO is not selected in the MUTE feature of

the PROGRAM INSTALL menu (see page 18).

•

Double image /

“ghost” image

Check antenna, cable or set-top box.•

Snowy / noisy

picture

Check antenna, cable and /or set-top box

connections. Ensure that they are properly connected.

•

Power No power Ensure that the TV's AC power cord is plugged into the

main socket and to your TV. If there is still no power,

disconnect the plug. Wait for 60 seconds and re-attach

plug. Switch on the TV again.

•

TV switch off by

itself

Check ESP (Energy Saving Programmability) setting in

TV installation / setup (see page 24).

Check that POWER SCART in the AUTO SCART

feature is not selected (see pages 25 and 26).

•

TV cannot be

switched off

Ensure FORCED ON is not selected in the POWER

ON feature of the SWITCH ON / OSD menu (see

pages 20 and 21).

•

Symptoms Possible Solutions

Power TV cannot be

switched on

If you are using the POWER button of the remote control to

switch on the TV, note that button is only use to set the TV to

stand-by mode. Use the Digit 0-9 or CH + / –

buttons to switch on TV.

Check if YES is selected in the REMOTE CONTROL

LOCK feature in SECURITY menu. Select NO to

deactivate lock function (see page 23).

Check if ALL is selected in the KEYBOARD LOCK

feature in SECURITY menu. Select NO to deactivate lock

function (see page 22).

Note: If both REMOTE CONTROL LOCK and

KEYBOARD LOCK feature are activated, use the Setup

Remote Control to go into these two menus to deactivate lock

function.

•

Sound No Sound Check if the volume of TV is not at the minimum. Try

pressing the Volume Up button of the remote control to

increase sound.

Check that the mute mode is not on. If mute mode is on, press

the Mute button on the remote control to deactivate mute

mode.

Check AUDIO is not selected in the MUTE feature of the

PROGRAM INSTALL menu (see page 18).

Check that the audio source in the DEFAULT HDMI

AUDIO feature is selected correctly (see page 30).

•

Volume level

cannot be

increased or

decreased

beyond a

certain value

Check the limit setting for the Minimum and Maximum Volume

and re-specify the setting in the MIN VOLUME / MAX

VOLUME features in the CONTROL menu (see page 27).

•

Remote

Control

TV does

not respond

to Guest

Remote

Control

Try changing the batteries.

Aim remote control directly at remote control sensor lens on

TV and try pressing any button on the remote control.

Check if YES is selected in the REMOTE CONTROL

LOCK feature in SECURITY menu. Select NO to

deactivate lock function (see page 23).

Deselect HM - LINK in the COMMUNICATION feature

(see page 14).

•

Note: The Troubleshooting section is applicable only to TV that is installed as a stand-alone.

If TV is connected to an interactive system, the behaviour of the TV will be controlled by the

system.

Troubleshooting

Getting started

Mounting the TV on a wall

This TV is compatible with the VESA wall

mounting standard. Please contact your local

electronics retailer for a VESA compliant

bracket to wall mount this TV.

Insert the cables into the TV before you

mount it on the wall.

Ensure that there is a distance of at least 30

mm between the wall and the back of the

TV. For sets with sub-woofer, an additional

10 mm is required for optimal sound effect.

Connecting the aerial and mains

Insert the aerial plug and the mains cord

firmly into their respective socket at the

bottom of the TV before connecting them

into the wall socket.

How to switch your TV on

To switch the TV on, press the POWER

key on the side controls. A green indicator

light comes on and after a few seconds the

screen lights up.

If the TV set remains in stand-by mode,

the indicator light remains red. Press the

PROGRAM +/- key on the side controls or

press the TV +/- key on the remote control.

Putting batteries in the remote

control

Insert the batteries into the remote control,

ensuring that the + and - ends of the

batteries are aligned correctly. The correct

alignment is indicated inside the casing of the

remote control.

Overview of TV Connectors and Controls

Warning

Do not connect any telephone cables or

equipment to Data 1 (RJ12) & Data 2 (RJ45)

connectors.

. POWER

To switch off the TV.

- PROGRAM +

To switch on TV and also to select the

next or previous programme.

To display or close menus.

- VOLUME +

To increase or decrease volume.

Data 1 (RJ 12)

For System Terminal connection.

Data 2 (RJ 45)

For SmartCard XpressBox connection.

8 ΩSpeaker

To connect to bathroom speaker. A

stereo jack must be used.

VGA In

For PC/Lap-top VGA input.

Headphones

To connect headphones. The mute

function does not work when head-

phones are plugged in.

EXT 1 (RGB) and EXT 2 (CVBS/

S-VIDEO)

To connect peripheral equipment.

TV Aerial

To connect to the aerial plug.

Audio / Video Inputs (EXT 3)

To connect to video camera or

camcorder. Only one video connection

can be used at a time.

HDMI 1 / HDMI 2

To connect to peripheral equipment,

including high-deﬁnition equipment.

Component Video Inputs/Audio

Inputs (EXT 4)

To connect to DVD or decoder which

have the same connectors.

Smart Card Slot

(Applicable to certain models only).

For use with compatible 32 pin smart

card.

Note: For the System SmartCard to

function, NO must be selected in the

LOW POWER STANDBY feature

of the FEATURES menu (see page 28).

YES must be selected in the ENABLE

CARD SLOT feature of the

COMMUNICATION menu.

10.

11.

12.

13.

14.

15.

PROGRAM

2DATA

1DATA

VGA In

11 12 13 14

EXT 3

EXT 4

Remote Controls

The following remote controls are applicable

to Philips Professional and Business Solutions

TV products. These can be used for setup

and configuration purposes.

RC2886

Guest Mode Remote Control

RC2573 is an optional remote control for

Institutional TV / Professional and Business

Solutions features and SmartCard settings. It

can be purchased separately.

POWER

SLEEP

GUIDE

RESET

CLOCK A / V

SMART

GUEST

DCM

SETUP

TEXT

RECALL

EFG

DBC

A/CH

VOL CH

Slide this button

up to enter into

Guest mode.

Slide this button

down to enter

into Setup

mode.

Autres manuels pour 26HF7875/10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips TV

Philips

Philips 46PP9302H Manuel utilisateur

Philips

Philips PFL30x8D Manuel utilisateur

Philips

Philips 32PFT5300 Manuel utilisateur

Philips

Philips 42PFL3604/12 Manuel utilisateur

Philips

Philips 19PFL3403/98 Manuel utilisateur

Philips

Philips MAGNAVOX 27TS57C1 Manuel utilisateur

Philips

Philips Matchline 34PT9421 Manuel utilisateur

Philips

Philips 50PF9630A 50 Manuel utilisateur

Philips

Philips 7855 Series Manuel utilisateur

Philips

Philips 26FW5220 Manuel utilisateur

Philips

Philips 40HFL4683S/F7 Manuel technique

Philips

Philips 27PT9007D Manuel utilisateur

Philips

Philips 52PFL7603D Manuel utilisateur

Philips

Philips 24PFL3538/V7 Manuel utilisateur

Philips

Philips 4100 series Manuel utilisateur

Philips

Philips 8507 Series Manuel utilisateur

Philips

Philips 6103 Series Manuel utilisateur

Philips

Philips 28DW6557 Manuel utilisateur

Philips

Philips 82WA8414/03 Manuel utilisateur

Philips

Philips EM5E AA Manuel utilisateur

Philips

Philips TCM2.0E Manuel utilisateur

Philips

Philips 50PFL3707/F7 Manuel utilisateur

Philips

Philips 7906 Series Manuel utilisateur

Philips

Philips 40HFL5011T/12 Manuel utilisateur

Manuels TV populaires d'autres marques

Toshiba

Toshiba 27A10 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Panasonic

Panasonic Genus TX-G10 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Sylvania

Sylvania 6427FB Manuel utilisateur

Sanyo

Sanyo CE19LD90N-B Manuel utilisateur

North State

North State TV2GO Manuel utilisateur

RCA

RCA RTU7877 Manuel utilisateur

Sharp

Sharp 21K-FG1RU Manuel utilisateur

Sony

Sony Esprit TAV-L1 Manuel utilisateur

Grundig

Grundig 43 VLE 4820 Manuel utilisateur

Samsung

Samsung LN26C350D1D Manuel utilisateur