Philips BM5C/98 Manuel utilisateur

www.philips.com/support

User manual

Always there to help you

BM5

Question?

Contact

Philips

English

Contents

1 Important 2

Safety 2

2 Your multiroom speaker 3

Introduction 3

What's in the box 3

Overview of the main unit 4

3 Prepare 6

Connect power and turn on 6

4 Play 8

Play in single mode 8

Play in group mode 9

Control play 11

5 Other features 12

Listen to an external device 12

Update rmware 12

Reset group status 13

6 Product information 14

Specications 14

7 Troubleshooting 15

8 Understand meanings of LED status 16

9 Notice 18

Written offer 18

2EN

1 Important

Safety

• Make sure that there is enough free space

around the product for ventilation.

• Only use attachments or accessories

specied by the manufacturer.

• Use only power supplies listed in the user

manual.

• The product shall not be exposed to

dripping or splashing.

• Do not place any sources of danger on the

product (e.g. liquid filled objects, lighted

candles).

• Where the plug the Direct Plug-in Adapter

or an appliance coupler is used as the

disconnect device, the disconnect device

shall remain readily operable.

Warning

• Never remove the casing of this unit.

• Never lubricate any part of this unit.

• Place this unit on a at, hard and stable surface.

• Never place this unit on other electrical equipment.

• Only use this unit indoors. Keep this unit away from

water, moisture and liquid-lled objects.

• Keep this unit away from direct sunlight, naked ames

or heat.

This is CLASS II apparatus with double

insulation, and no protective earth provided.

English

2 Your multiroom

speaker

Congratulations on your purchase, and

welcome to Philips! To fully benet from

the support that Philips offers, register your

product at www.philips.com/welcome.

Introduction

With the Philips izzylink speaker, you can:

• listen to music from your Bluetooth-

enabled devices;

• listen to music everywhere in your home

through a group of izzylink-compatible

multiroom speakers (not supplied);

• listen to music from an external audio

device through a 3.5mm audio cable.

What's in the box

Check and identify the contents

of your package:

• 1 x izzylink multiroom speaker

• 1 x power adapter

• Printed materials

4EN

Overview of the main unit

• Turn the speaker on or off.

b GROUP button/indicator

• Press and hold to group with another

multiroom speaker.

• Press to exit or return to a group.

• Flashes green during grouping.

• Turns solid green after

successful grouping.

• Flashes green when the

speaker acts as a slave and is

disconnected from its master.

c Signal strength indicator

• Indicates the signal strength of group

connection.

d Volume knob

• Turn clockwise/anticlockwise to

increase/decrease volume.

• Press to mute/unmute the speaker.

e Volume indicator

• Lights up after power-on.

abcdefg

hijk

• Dims in standby mode.

• Flashes when the speaker is muted.

• Turns green when the speaker acts

as a slave in a group of speakers.

f button/indicator

• Flashes blue in pairing mode.

• Turns solid blue after

successful connection with a

Bluetooth-enabled device.

• Turns off in standby mode or

when the speaker acts as a

slave in a group of speakers.

• Press and hold for three seconds

to disconnect the current

Bluetooth connection.

• Press and hold for ten seconds to

clear the pairing information.

• Start, pause, or resume play.

h AUDIO IN

English

• Audio input socket (3.5mm) for an

external audio device.

i SOFTWARE UPGRADE

• USB socket for speaker software

upgrade only.

j GROUP RESET

• Press with a sharp object to restore

factory defaults.

k DC IN

• Power socket.

6EN

3 Prepare

Always follow the instructions in

this chapter in sequence.

If you contact Philips, you will be asked

for the model and serial number of

this apparatus.The model number and

serial number are on the bottom of the

apparatus.Write the numbers here:

Model No. __________________________

Serial No. ___________________________

Connect power and turn on

Caution

• Risk of product damage! Make sure that the power

supply voltage corresponds to the voltage printed on

the bottom of the speaker.

• Risk of electric shock! When you unplug the AC power

adapter, always pull the plug from the socket. Never

pull the cord.

• Before you connect the AC power adapter, make sure

that you have completed all the other connections.

• Connect the power adapter to

• the DC IN socket on the back of the

speaker.

• the wall power socket.

» The volume indicator lights up.

» The signal strength indicators ash

for several seconds until the speaker

boots up.

» For rst-time use or in single mode,

the indicator starts ashing and the

speaker enters pairing mode.

» When the speaker acts as the master

in group mode, the indicator starts

ashing until the speaker nds the last

paired Bluetooth-enabled device.

» When the speaker acts as a slave in

group mode, the GROUP indicator

starts ashing until the speaker nds its

master in the group.

Tip

• Single mode indicates to use a speaker as a single

Bluetooth speaker that does not acts as a master or

slave in a group of speakers.

• Group mode indicates that several multiroom speakers

form a group, with one speaker acting as the master

and the others as slaves.

Switch to standby mode

• In single mode, press to switch to

standby mode.

» The volume indicator dims.

» All the other indicators turn off.

• In group mode, press on any speaker in

the group to switch to standby mode.

» The volume indicator on each speaker

in the group dims.

» All the other indicators turn off.

To switch between standby

mode and ECO mode

• Press and hold for three seconds.

• In single mode, to switch on from standby

mode or ECO mode, press again.

• In group mode, press on any speaker

in the group to switch all the speakers on

from standby mode or ECO mode.

English

Note

• You can hold to turn off the volume indicator

completely.

• In single mode, if the Bluetooth connection is invalid or

music playback is stopped for 15 minutes, the speaker

switches to standby mode automatically.

• In group mode, if the Bluetooth connection with the

master speaker is invalid or music playback is stopped

for 15 minutes, all the speakers in the group switch to

standby mode automatically.

8EN

4 Play

Play in single mode

Single mode: Single mode means that the

speaker is not grouped with any other

izzylink-compatible multiroom speakers.

Instead, it is used as a standalone speaker.

Connect a Bluetooth-enabled device

Note

• Make sure that your Bluetooth-enabled device is

compatible with this speaker.

• Before pairing a device with this speaker, read its user

manual for Bluetooth compatibility.

• The speaker can memorize a maximum of 8 paired

devices.

• Make sure that the Bluetooth function is enabled on

your device, and your device is set as visible to all other

Bluetooth devices.

• Any obstacle between this speaker and a Bluetooth

device can reduce the operational range.

• Keep away from any other electronic device that may

cause interference.

• The operational range between this speaker and a

Bluetooth device is approximately 10 meters (30 feet).

1 Make sure that the speaker is in pairing

mode, that is, the indicator ashes blue.

2 On your Bluetooth device, enable

Bluetooth and search for Bluetooth devices

(refer to the user manual of the device).

3 When [Philips BM5 XXX] is displayed on

your device, select it to start pairing and

connection. If necessary, enter the default

password “0000”.

» After successful pairing and connection,

the speaker beeps twice, and the

indicator turns solid blue.

Philips BM5 XXX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Intervenants

Philips

Philips CSP652/51 Manuel utilisateur

Philips

Philips HTL2183B/93 Manuel utilisateur

Philips

Philips SBCBC700/00 Manuel utilisateur

Philips

Philips BTS5000B Manuel utilisateur

Philips

Philips MMS8080B Manuel utilisateur

Philips

Philips SPA5210B Manuel utilisateur

Philips

Philips SPA7351 Manuel utilisateur

Philips

Philips SPA3210 Manuel utilisateur

Philips

Philips SB365B Fiche d'information produit

Philips

Philips SPA8180B Manuel utilisateur

Philips

Philips FX20 Manuel utilisateur

Philips

Philips TAFS1/10 Manuel utilisateur

Philips

Philips HTS7140 Manuel utilisateur

Philips

Philips SPA7380 Manuel utilisateur

Philips

Philips Fidelio DS8800W/10 Manuel utilisateur

Philips

Philips HTL1032 Manuel utilisateur

Philips

Philips HTS7111/12 Manuel utilisateur

Philips

Philips AD6000W/10 Manuel utilisateur

Philips

Philips PHBT2600 Manuel utilisateur

Philips

Philips Fidelio B5 Manuel utilisateur

Philips

Philips SBCBA130/00 Manuel utilisateur

Philips

Philips HTL2101A Manuel utilisateur

Philips

Philips SBT50/00 Manuel utilisateur

Philips

Philips CSS5123/12 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur