Philips SRU 540/05 Manuel utilisateur

SRU 540/05

Quick, Clean & Easy Setup

www.philips.com/urc

Instructions for use 4

Quick, Clean & Easy Setup

www.philips.com/urc

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 1

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 2

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 3

Contents

1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2. Installing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Inserting the batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Testing the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Setting the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7

3. Keys and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. Extra possibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9

Adjusting device selection (Mode-selector) . . . . . . . . . . . . . . . . . . . . . . 8

Adding a remote control function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Restoring the original remote control settings . . . . . . . . . . . . . . . . . . . . 9

5. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6. Need help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Code list of all brands / equipment . . . . . . . . . . . . . . . . . . . . . . . . . 12-20

1. Introduction

Congratulations on your purchase of the Philips SRU540 universal remote

control. After installing the remote control you can operate a maximum of

4 different devices with it:TV, DVD player/recorder, video recorder and SAT

(settop box, satellite or cable decoder).You can find information about how

to prepare this remote control for use in the chapter ‘Installing the remote

control’.

2. Installing the remote control

Inserting the batteries

1Press the cover inwards and slide it in the

direction of the arrow.

2Place two AAA type batteries into the

battery compartment, as shown.

3Slide the cover back and click it firmly into

place.

Note: If the device indicators in the selector window (TV, DVD, SAT and VCR) blink

four times after every key press, the remote control is indicating that its

batteries are running low. Replace the old batteries with two new AAA

batteries.

Testing the remote control

The remote control has been programmed to operate most Philips devices.

Because the SRU540 may use different signals for each brand and even for

different models of the same brand, it is advisable to test whether your

device responds to the SRU540.The example below (TV) instructs you how

to do this.You can repeat the same steps for other devices (DVD

player/recorder, video recorder, etc.) which you want to operate using the

SRU540.

Example of TV:

1Turn your TV on manually or use the original remote control.

Tune to channel 1.

Instructions for use

English

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 4

Instructions for use

English

2Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

If TV does not light up, check whether the

batteries are properly inserted

(see ‘Inserting the batteries’).

3Check whether all keys are working.

For an overview of the keys and their

functions see ‘3. Keys and functions’.

–If the TV responds as it should to all of the

key commands the SRU540 is ready for use.

•If the device does not respond at all or not to all of the

key commands, follow the instructions under

‘Setting the remote control’, or for online setup go to:

www.philips.com/urc.

Setting the remote control

This is only necessary if your device does not respond to the SRU540.

If that is the case, the SRU540 does not recognize the brand and/or model of

your device and you need to program the remote control to do so.

The example below (TV) instructs you how to do this.You can repeat the

same steps for other devices (DVD player/recorder, video recorder, etc.)

which you want to operate using the SRU540.

Automatically setting the remote control

The remote control will now automatically search for the right code for your

device.

Example of TV:

1Make sure the TV is switched on and select a channel using the original

remote control or the keys on the TV (for example channel 1).

The SRU540 emits the ‘switch off TV’ signal for all models of TV that are

stored in the memory.

•If the device is a DVD player/recorder or video recorder,

insert a disk or tape and start playback.

2Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

3Then keep keys 1 and 3 pressed

simultaneously for five seconds until TV in the

selector window flashes twice and then

remains lit.

4Press and hold the Standby key of the

SRU540.

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 5

–The SRU540 now starts emitting all known

‘TV off ’ signals, one by one.

Each time a code is sent,TV in the selector

window lights up.

5When your TV switches off (stand-by), release the Standby key of the

SRU540 immediately.

–The SRU540 has now found a code that works on your TV.

6Check if you can operate all functions on your TV with the SRU540.

•If this is not the case, you can redo the automatic setting.

The SRU540 will then search for a code that works better.

–After the SRU540 has run through all the known codes, the search will

stop automatically and TV in the selector window will stop flashing.

–Automatic programming of a TV takes a maximum of 5 minutes.

For DVD,VCR and SAT this time is 2 minutes

Manually setting the remote control

Example of TV:

1Turn on the TV manually or use the original remote control.

Tune in to channel 1.

2Look up the brand of your TV in the

code list at the back of this manual. One or

more four-figure codes are shown for each

brand. Note the first code.

Be careful! There are separate tables for TV,

video, DVD, etc.

On our website www.philips.com/urc you can directly select your device

typenumber to find the right code.

Make sure you use the codes from the correct table.

3Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

4Keep keys 1 and 3 pressed simultaneously

for five seconds until TV in the selector

window flashes twice and then remains lit.

5Then enter the code noted in step 2 using the digit keys.

–TV in the selector window will now flash twice.

If TV flashes once for an extended period, the code has not been

entered properly or the wrong code has been entered.

Start again from step 2.

6Point the SRU540 at the TV and check that it responds as it should.

–If the TV responds to all of the key commands, the SRU540 is ready for

use. Do not forget to note your code.

Instructions for use

English

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 6

•If the device does not respond at all, or not to all of the

key commands, start again from step 2 and try the next code

from the list.

3. Keys and functions

The illustration on page 3 gives an overview of all keys and their functions.

1yStandby . . . . . . . . . switches TV,VCR, DVD or SAT on or off.

2. . . . . - teletext on/off ( );

- text off ( );

- wide screen TV ( );

- subtitle ( );

- text hold ( ).

3MENU. . . . . . . . . . . . . turns the menu on and off.

4Cursor keys. . . . . . . . cursor up, down, left, right in a menu.

5AV . . . . . . . . . . . . . . . . switches between external inputs of your

equipment.

6s. . . . . . . . . . . . . . . . . . mutes the sound of the TV.

7- VOL + . . . . . . . . . . . . adjusts the TV volume.

8Digit keys. . . . . . . . . . direct choice of channels and other functions.

9SHIFT . . . . . . . . . . . . . for extra functions.When pressed at the same

time as a second key, the second key will get

another function. All blue labelled keys can be

used together with SHIFT. For example:

SHIFT + INSTALL . installs your TV

SHIFT + STORE . . . stores TV settings

Tr y out other combinations with the SHIFT-key on your device in order to

find out which functions are available.

Only functions featured on the original remote control are available.

05. . . . . . . . . . . . . . . . . - red teletext key

- rewind (VCR/DVD)

2. . . . . . . . . . . . . . . . . . - index

- play (VCR/DVD)

6. . . . . . . . . . . . . . . . . - blue teletext key

- wind (VCR/DVD)

9. . . . . . . . . . . . . . . . . . - green teletext key

- stop (VCR/DVD)

0. . . . . . . . . . . . . . . . . . record

;. . . . . . . . . . . . . . . . . . - yellow teletext key

- pause (VCR/DVD)

!/. . . . . . . . . . . . . . . . . selects between one- and two-figure channel

numbers.

@22/ SURROUND . . selects previous programme/channel.

selects surround modes.

#- PROG + . . . . . . . . . . selects a previous or following channel.

$INFO . . . . . . . . . . . . . . turns menu info on and off.

%OK . . . . . . . . . . . . . . . . confirms your selection.

^BACK . . . . . . . . . . . . . jumps back one level in the menu or turns off

the menu.

&SELECT . . . . . . . . . . . selects TV, DVD, SAT or VCR mode.

If you use the (ﬁ) 'memory off' key to get to the next teletext page on your

Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.

If the device does not respond at all, or not to all of the key

commands, follow the instructions under ‘Setting the remote control’.

It is possible that you must enter another code for the device. 7

Instructions for use

English

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 7

4. Extra possibilities

Adjusting device selection (Mode selector)

The SRU540 is default set for operating TV,VCR, SAT (settop box, satellite or

cable decoder) and DVD.You can select the device you wish to operate with

the SELECT key (mode selector). Each option allows operation of one device

only. If desired, you can program the SELECT key (mode selector) to select a

different kind of device. For example, if you want to operate a second TV.

In the following example you will see how to configure the SAT mode for a

second TV.

1Switch on the second TV.

2Press the SELECT key to select SAT.

Press the key until SAT lights up in the

selector window.

3Then keep keys 1 and 6 on the SRU540

pressed simultaneously for five seconds, until

SAT in the selector window lights up.

4Press keys 9, 9 and 2, in that order.

5Press the SELECT key to select TV.

Press the key until TV lights up in the selector

window.

6Press the 1 key.

–SAT in the selector window flashes twice.

SAT will now allow you to operate your

second TV.

7Program the SRU540 to operate the second TV.

See ‘Setting the remote control’.

Adding a function to the remote control

If you want to add a function to the SRU540, you can contact the

Philips service line for Universal Remote Control to ask for the 5-figure code

for the extra function.

Instructions for use

English

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 8

Restoring the original functions of your remote

control

1Keep keys 1 and 6 on the SRU540 pressed

simultaneously for five seconds,until one of

the device indicators (TV, DVD, SAT,VCR)

lights up in the selector window.

2Press keys 9, 8 and 1, in that order.

– The device indicator in the selector window

flashes twice. All original functions have now

been restored and any extra functions have

been deleted.

5. Troubleshooting

• Problem

– Solution

•The device indicators in the selector window (TV, DVD, SAT and VCR)

blink four times after every key press.

–The remote control is indicating that its batteries are running low. Replace the old

batteries with two new AAA batteries.

•The device you want to operate does not respond and it’s indicatior in

the selector window does not flash when you press a key.

–Replace the old batteries with two new AAA batteries.

•The device you want to operate does not respond but it’s indicatior in

the selector window does flash when a key is pressed.

–Point the SRU540 at the device and make sure that there are no

obstructions between the SRU540 and the device.

•The SRU540 does not respond properly to commands.

–Maybe you are using the wrong code.Try programming the SRU540 again

using another code, which is mentioned under the brand of your device, or

reset for automatic search to find the right code.

If the device still does not respond, call our helpline.

•The Teletext keys do not work.

– Find out whether your TV is equipped with Teletext.

•You have difficulties operating all of the functions on your device.

– Maybe the SRU540 has to be adapted to the model of the device.

Call our helpline for details.

•Your brand of device is not in the code list.

– Try to set the SRU540 automatically.

See ‘Automatically setting the remote control’.

•None of the codes works during manual setting of the remote control.

– If that is the case, follow the instructions under

‘Automatically setting the remote control’.

Instructions for use

English

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 9

6. Need help?

If you have any questions about the SRU540, you can always contact us.

You will find our contact details after the code list at the back of this manual.

Read this manual carefully before you make a call.You can solve most of the

problems yourself. If you cannot find any answers to your problems, write

down the details of your device shown in the code list at the back of this

manual.This will help our operators to assist you better and more quickly.

Look up the numbers of the models in the instructions accompanying the

device or on the back of your device.When you call our helpline, make sure

the device is to hand so that our operators can help you determine whether

your remote control is working properly.

The model number of your Philips universal remote control is SRU540/10.

Date of purchase: ......../......../........

(day/month/year)

Instructions for use

English

SRU540_05_English_versie_6.qxd 26-04-2005 14:40 Pagina 10

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Télécommande

Philips

Philips 29PT8403/32 Manuel utilisateur

Philips

Philips Pronto NG Manuel utilisateur

Philips

Philips SBCRU620 Manuel utilisateur

Philips

Philips PRESTIGO SRU8008 Manuel utilisateur

Philips

Philips SRU5110/87 Manuel utilisateur

Philips

Philips Head Hall C13 Manuel utilisateur

Philips

Philips PRONTO TSU7500 Manuel utilisateur

Philips

Philips Magnavox 50P8241 Manuel utilisateur

Philips

Philips Prestigo SRU8112 Manuel utilisateur

Philips

Philips SRP9368D/27 Manuel utilisateur

Philips

Philips SBCRU098/00 Manuel utilisateur

Philips

Philips SRU8008/27 Manuel utilisateur

Philips

Philips SRP4004/86 Manuel utilisateur

Philips

Philips SBCRU1000/05 Manuel utilisateur

Philips

Philips Pronto TSU9400 Guide de sécurité

Philips

Philips SBCRU640 Manuel utilisateur

Philips

Philips SRU2104S/27 Manuel utilisateur

Philips

Philips PM525S - Phlips 5 Device Universal Remote... Manuel utilisateur

Philips

Philips SRU3004WM/17 Manuel utilisateur

Philips

Philips SRU5040/55 Manuel utilisateur

Philips

Philips Prestigo SRU8015 Manuel utilisateur

Philips

Philips GV-3/1F-RC-M433 Manuel utilisateur

Philips

Philips SRP2024A/27 Manuel utilisateur

Philips

Philips 22AV8573/00 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation