Philips SRP6011 Manuel utilisateur

TAPR802

www.philips.com/support

User manual

Universal Remote

SRP6011

1EN

Contents

1 Your universal remote 2

Introduction 2

Overview of the universal remote 2

2 Get started 3

Insert batteries (not included) 3

Set up the universal remote 3

3 Use your universal remote control 6

Learning 6

4 Notice 7

Disposal of your old product and battery 7

5 Service and support 8

Frequently asked questions 8

Need help? 8

Contents

2EN

1 Your universal

remote

Congratulations on your purchase, and

welcome to Philips! To fully benet from the

support that Philips offers, register your product

at www.philips.com/welcome

Introduction

With the universal remote, you can use it to

operate your device.

Overview of the universal

remote

LIST

FAV AUDIO

HOME

BASS

TREBLE

BASS

SMART

MENU BACK

a: power on or off.

bAMBLIGHT: switch the amblight on/off.

LIST: open the channel list.

SLEEP: sleep timer

FAV: access the favorite channel list.

OPTIONS: access the options menu.

AUDIO: select the audio channel.

c: stop

: pause

: record

: rewind

: play

: fast forward

d: previous track

STREAM: shortcut to Netix or other App.

: next track

eHOME

SMART: SMART TV, My App or Apps.

MENU: menu on or off.

BACK: go back one menu level.

OK: conrm your selection.

TREBLE/BASS: select the sound preference.

/ //: scroll the menu up/down/

left/right.

fCH+/- go to the next/previous channel.

: select available source inputs (antenna,

cable, etc.).

: volume down

: mute

: volume up

g: subtitle

: return to the previous tuned channel.

: screen format

: teletext off

: teletext mix

: teletext on

Red/Green/Yellow/Blue: context sensitivity

buttons.

hDigit buttons

I/II : select the audio channel.

-/-- : select between one and two-gure

channel numbers.

3EN

2 Get started

Insert batteries (not included)

Warning

• Check the battery polarity when inserting in the

battery compartment. Incorrect polarity may damage

the product.

Caution

• Risk of explosion! Keep batteries away from heat,

sunshine or re. Never discard batteries in re.

• Risk of decreased battery life! Never mix different

brands or types of batteries.

Note

• When you replace the batteries, all user settings will

be retained in the memory of the universal remote for

5 minutes.

Set up the universal remote

You must rst set up the universal remote

before operating your device.

Set up by code selection

1 Switch on your device.

2 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

3 Look up the 5-digit code for your brand

in the code list. Codes are listed by the

device type and brand name.The most

popular code is listed rst.

12345

4EN

4 Enter the rst 5-digit code using the digit

buttons.

5 If the light is off, a valid code is saved.

Otherwise, the light will ash six times, and

then remains on for code re-entry.

LIST

FAV AUDIO

HOME

BASS

TREBLE

BASS

SMART

MENU BACK

6 Operate the device with the universal

remote. If your device responds correctly,

it means you have entered the right code.

Otherwise, repeat from Step 2, and enter

the second code on the list.

Note

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again. If there spill problem on code or key, you

can try to learn a key by learning faction if the remote

support learning function.

Auto registration

1 Switch on your device.

2 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

3 Point at your device with the universal

remote.Then press and release to

start searching the code for your brand.

A different infrared signal is sent every 2

seconds as the universal remote searches,

indicated by a blue ash.

5EN

LIST

FAV AUDIO

HOME

BASS

TREBLE

BASS

SMART

MENU BACK

4 When the device is off, immediately press

and release OK to save the code.The blue

LED indicator will turn off.

max. 20

minutes

LIST

FAV

AUDIO

HOME

BASS

TREBLE

BASS

SMART

BACK

LIST

FAV

AUDIO

HOME

BASS

TREBLE

BASS

SMART

BACK

5 Operate the device with the universal

remote. If your device responds correctly, it

means you have saved the right code.

Note

• Auto registration can be reversed, by pressing and

releasing once more during the auto registration

process.This is helpful if you missed out the chance to

press OK within 2 seconds. Make sure that the device

is rst powered on again.

• It is possible sometimes that your device only responds

to some of the buttons. In such case, set up with the

next code in the code list, and try operating your

device again.

6EN

3 Use your

universal

remote control

Learning

You must have an original remote for the

Universal Remote Control (URC) to learn code

from it.

Learn commands

1 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

2 Enter the learning code 99900.

The red LED light will ash once and then

remains on.

3 Place the URC and the original remote,

head to head aiming at each other, on a at

surface.

4 On the URC, press the button that you

would like to learn a code from the

original remote. The LED will ash twice

and stay on.

5 On the original remote, press and hold the

button that you would like to learn from

for 2 seconds.

6 The LED will blink once and stay on if the

learning was successful.To learn another

key, repeat Step 4.

To exit, press 1and 6at the same time.

7 The LED will blink 6 times quickly if

learning failed. Repeat Step 4 to learn again.

Note

• On step 4, if no key is selected for more than 15

seconds, the LED indicator will ash six times and the

learning mode will exit automatically.

• On step 5, if no other remote signal is received for

more than 30 seconds, the LED indicator will ash

six times and then remains on. You will need to select

a desired key again for learning as in step 4 on your

universal remote control.

• Each function key will hold only one command, a new

command to be learned will automatically replace the

previous one.

Clear learned commands

Clear all codes learned for the universal

remote control

1 Press and hold 1and 6at the same time

for 5 seconds until the red LED is on.

2 Enter the learning code 99920.The

red LED light will remain on briey, ash

twice and then turns off.

» All codes learned for the universal

remote control will be cleared.

7EN

4 Notice

Disposal of your old product

and battery

Your product is designed and manufactured

with high quality materials and components,

which can be recycled and reused.

This symbol on a product means that the

product is covered by European Directive

2012/19/EU.

This symbol means that the product contains

batteries covered by European Directive

2013/56/EU which cannot be disposed of with

normal household waste.

Inform yourself about the local separate

collection system for electrical and electronic

products and batteries. Follow local rules and

never dispose of the product and batteries

with normal household waste. Correct disposal

of old products and batteries helps prevent

negative consequences for the environment and

human health.

Removing the disposable batteries

To remove the disposable batteries, see section

‘Insert batteries’.

When this logo is attached to a product, it

means a nancial contribution has been paid to

the associated national recovery and recycling

system.

Environmental information

All unnecessary packaging has been omitted.

We have tried to make the packaging easy to

separate into three materials: cardboard (box),

polystyrene foam (buffer) and polyethylene

(bags, protective foam sheet.)

Your system consists of materials which can

be recycled and reused if disassembled by

a specialized company. Please observe the

local regulations regarding the disposal of

packaging materials, exhausted batteries and old

equipment.

operators can help you determine whether

SRP6011 is working properly.

You will nd our contact details at the end of

this user manual. For online support, visit

www.philips.com/support

5 Service and

support

Frequently asked questions

My universal remote does not work at all.

• Check if you have correctly setup the

device with the right code. Check if you

have pressed the corresponding device key

for your device.

• Check if the batteries are inserted properly.

If the battery level is low, replace the

batteries.

• Check if your device is powered on.

If several device codes are listed under the

brand of my device, how can I select the

correct device code?

To seek the correct device code, test the codes

one by one.The codes are sorted by popularity,

and the most popular code is listed rst.

My device responds only to some of the

commands.

You have set a code for which only some

commands work properly but some do not.Try

other codes until most keys work properly or

learn the key from original remote if it support

learning function.

Need help?

We advise you to rst read this user manual

carefully. It helps you set up and use the

universal remote.

If, however, you require extra information or

have additional questions about setup, usage,

warranty, etc of the SRP6011, you can always

When calling our helpline, make sure to have

the SRP6011 at hand when you call, so that our

Specications are subject to change without notice.

Philips and the Philips Shield Emblem are registered trademarks

of Koninklijke Philips N.V. and are used under license.

This product has been manufactured by and is sold under the

responsibility of MMD Hong Kong Holding Limited or

one of its afliates, and MMD Hong Kong Holding Limited is

the warrantor in relation to this product.

SRP6011_10_UM_V1.0

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Télécommande

Philips

Philips SRP 3004/10 Manuel utilisateur

Philips

Philips SRU740NC/05 Manuel utilisateur

Philips

Philips SBC RU422 Manuel utilisateur

Philips

Philips SBC RU430 Manuel utilisateur

Philips

Philips Prestigo SRU8112 Manuel utilisateur

Philips

Philips Prestigo SRU8015/10 Manuel utilisateur

Philips

Philips Pronto TSU9800 Guide de sécurité

Philips

Philips Prestigo SRU6006/10 Manuel utilisateur

Philips

Philips SRP6013 Manuel utilisateur

Philips

Philips 29PT9413/12 Manuel utilisateur

Philips

Philips 22HFL2869P/12 Manuel utilisateur

Philips

Philips ProntoTSU9800 Manuel utilisateur

Philips

Philips SRU5150/86 Manuel utilisateur

Philips

Philips SBCRU510/87B Manuel utilisateur

Philips

Philips SRU2104S/27 Manuel utilisateur

Philips

Philips SRP3011 Manuel utilisateur

Philips

Philips SRP3219G/27 Manuel utilisateur

Philips

Philips Pronto TSU9200 Manuel utilisateur

Philips

Philips SBCRU258/00H Manuel utilisateur

Philips

Philips SRU3030/10 Manuel utilisateur

Philips

Philips SRP4004/27 Manuel utilisateur

Philips

Philips SRP5018 Manuel utilisateur

Philips

Philips Pronto SBCRU960/00 Manuel utilisateur

Philips

Philips SRP3013 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation