Philips RI2820/12 Manuel utilisateur
RI2800 SERIES
4239.000.7100.1.indd 1 15-12-09 16:53
2
4239.000.7100.1.indd 2 15-12-09 16:53
3
D E F GA B C
JKLM
H
I
1
4239.000.7100.1.indd 3 15-12-09 16:53
4
4239.000.7100.1.indd 4 15-12-09 16:53
6
18
31
4239.000.7100.1.indd 5 15-12-09 16:53
6
Congratulations on your purchase and welcome to Philips! To fully benet
from the support that Philips offers, register your product at www.philips.
com.br.
Spray nozzle
Cap of lling opening
Spray button 8
Steam control
- b= Calc-Clean function
- 0 = no steam
- l = minimum steam
- ; = maximum steam
Steam boost button \
Auto-off light (RI2860 only)
Mains cord
Temperature light
Anti-Calc tablet (RI2860/RI2840/RI2830/RI2820 only)
Note: Anti-Calc tablet not visible from the outside.
Type plate
Water tank
Temperature dial
Soleplate
Read this user manual carefully before you use the appliance and save it
for future reference.
- Never immerse the iron in water.
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
4239.000.7100.1.indd 6 15-12-09 16:53
- Do not use the appliance if the plug, the mains cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or leaks.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
- Never leave the appliance unattended when it is connected to the
mains.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
- Do not let the mains cord come into contact with the hot soleplate
of the iron.
- Only connect the appliance to an earthed wall socket.
- Check the mains cord regularly for possible damage.
- The soleplate of the iron can become extremely hot and may cause
burns if touched.
- When you have nished ironing, when you clean the appliance, when
you ll or empty the water tank and also when you leave the iron
even for a short while: set the steam control to position O, put the
iron on its heel and remove the mains plug from the wall socket.
- Always place and use the iron on a stable, level and horizontal
surface.
- Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.
- This appliance is intended for household use only.
This Philips appliance complies with all standards regarding
electromagnetic elds (EMF). If handled properly and according to the
7
4239.000.7100.1.indd 7 15-12-09 16:53
instructions in this user manual, the appliance is safe to use based on
scientic evidence available today.
1 Remove any sticker or protective foil from the soleplate.
2 Let the iron heat up to maximum temperature and pass the iron
over a piece of damp cloth for several minutes to remove any
residues from the soleplate.
Do not put perfume, vinegar, starch, descaling agents, ironing aids,
chemically descaled water or other chemicals in the water tank.
1 Switch off the appliance and unplug it.
2 Set the steam control to position 0 (= no steam) (Fig. 2).
3 Open the cap of the lling opening.
4 Tilt the iron and ll the water tank up to maximum level under the
tap (Fig. 3).
Note: Do not ll the water tank beyond the MAX indication.
Note: If the tap water in your area is very hard, we advise you to use distilled
water. Do not use chemically descaled water.
5 Close the cap of the lling opening (‘click’).
Fabric type Temperature
setting
Steam
setting
Steam boost
Linen MAX &Yes
Cotton 3&Yes
8
4239.000.7100.1.indd 8 15-12-09 16:53
Fabric type Temperature
setting
Steam
setting
Steam boost
Wool 2$N.A.
Silk 10 N.A.
Synthetic fabrics (e.g.
Acrylic, nylon,
polyamide, polyester).
10 N.A.
- Check the laundry care label for the required ironing temperature:
If you do not know what kind or kinds of fabric an article is made of,
determine the right ironing temperature by ironing a part that will not be
visible when you wear or use the article.
Silk, woollen and synthetic materials: iron the reverse side of the fabric to
prevent shiny patches. Avoid using the spray function to prevent stains.
1 To set the appropriate ironing temperature, turn the temperature
dial to the appropriate position (see ‘Temperature and steam
settings table’) (Fig. 4).
2 Set the appropriate steam setting (see ‘Temperature and steam
settings table’).
Note: Make sure that the steam setting you select is suitable for the set
ironing temperature.
3 Put the iron on its heel.
4 Put the mains plug in an earthed wall socket.
,The temperature light goes on.
5 When the temperature light goes out, wait a while before you start
ironing.
,During ironing, the temperature light goes on from time to time.
This indicates that the iron is heating up to the set temperature.
9
4239.000.7100.1.indd 9 15-12-09 16:53
Note: The iron may give off some smoke when you use it for the rst time.
This stops after a short while.
1 Make sure that there is enough water in the water tank.
2 Set the recommended ironing temperature (see chapter ‘Preparing
for use’, ‘Temperature and steam setting table’).
3 Set the appropriate steam setting. Make sure that the steam setting
is suitable for the ironing temperature selected:
- $ for minimum steam (temperature settings 2 and 3).
- & for maximum steam (temperature settings 3 to MAX).
Note: The iron starts to produce steam as soon as it has reached the set
temperature.
1 Set the steam control to position 0 (= no steam) (Fig. 2).
2 Set the recommended ironing temperature (see chapter ‘Preparing
for use’, ‘Temperature and steam setting table’).
You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is enough water in the water tank.
2 Press the spray button several times to moisten the article to be
ironed (Fig. 5).
A powerful boost of steam helps to remove very stubborn creases.
The steam boost function only works at temperature settings between
3 and MAX.
10
4239.000.7100.1.indd 10 15-12-09 16:53
Ce manuel convient aux modèles suivants
7
Table des matières
Langues :
Autres manuels Philips Fer
Philips
Philips EasySpeed GC1020 series Manuel utilisateur
Philips
Philips GC7300 Series Manuel utilisateur
Philips
Philips PerfectCare 7000 Series Manuel utilisateur
Philips
Philips PowerLife GC2510 Manuel utilisateur
Philips
Philips GC3592 Manuel utilisateur
Philips
Philips 8000 Series Manuel utilisateur
Philips
Philips GC8952-30 Manuel utilisateur
Philips
Philips 8000 Series Manuel utilisateur
Philips
Philips Perfect Care Performer GC8702 Manuel utilisateur
Philips
Philips HI282/22 Manuel utilisateur
Philips
Philips GC351/20 Manuel utilisateur
Philips
Philips GC4400 serie Manuel
Philips
Philips PerfectCare Xpress GC5060 Manuel utilisateur
Philips
Philips GC7480 Manuel utilisateur
Philips
Philips GC9610/20 Manuel utilisateur
Philips
Philips GC9600 SERIES Manuel
Philips
Philips GC7320 Manuel utilisateur
Philips
Philips GC1800 SERIES Manuel utilisateur
Philips
Philips GC7000 Series Manuel utilisateur
Philips
Philips PerfectCare Aqua GC8615 Manuel utilisateur
