Philips GC4900 Manuel utilisateur
User manual
Register your product and get support at
www.philips.com/welcome
GC4900 series
2
GC4900 series
ENGLISH 6
14
22
TÜRKÇE 30
38
6
Introduction
Congratulations on your purchase and welcome to Philips!
To fully benet from the support that Philips offers, register your
product at www.philips.com/welcome.
The new Philips PerfectCare Azur steam iron offers you an innovative
way to iron garments. We all know the fuss with traditional irons: choosing
the right temperature for tough and delicate fabrics, waiting for the iron
to warm up and cool down to avoid the risk of damaging clothes with
a too hot iron. Those hassles are things of the past with the new Philips
PerfectCare Azur steam iron.
Historically, wrinkle removal was done with a very hot soleplate, then
steam was added to enhance heat transfer and we could iron much faster.
In the past, a large amount of steam at this optimal temperature would
have led to water leakage. We have developed a unique steam chamber
that generates a consistent output of moisture-rich steam that penetrates
deep into the fabric for fast ironing with no risk of water leakage.
-Ironing is now really simple: no temperature adjustment, no scorching,
no waiting for the iron to heat up or cool down. Ironing takes less
time, no matter who does it. With this OptimalTEMP technology, every
single garment can be ironed effectively and safely.
This iron has been approved by The Woolmark Company Pty Ltd for the
ironing of wool-only products, provided that the garments are ironed
according to the instructions on the garment label and those issued by the
manufacturer of this iron, R1101. In the United Kingdom, Eire, Hong Kong
and India, the Woolmark trademark is a certication trademark.
1 Water tank lid
2 Spray button
3 Steam slider
4 Steam boost trigger
5 Mains cord
6 Cord winding area
7 Calc-Clean button
8 SmartLight/Calc-Clean reminder light
9 Soleplate
10 Spray nozzle
ENGLISH
1 Flipopenthewatertanklid,thenllthewatertankuptotheMAX
indication.
This appliance has been designed to be used with tap water. If you live
in an area with hard water, fast scale build-up may occur. Therefore, it is
recommended to use distilled or de-mineralized water to prolong the
lifetime of the appliance.
Note: Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank, as your appliance is not designed to work
with these chemicals.
1 Insert the plug into an earthed wall socket.The SmartLight starts
ashingbluetoindicatethattheironisheatingup.
2 TheSmartLightlightsupbluesteadilywhentheironisreadyforuse.
Note: If the colour of the SmartLight is amber instead of blue, this is a
reminder that you should perform function. See chapter
‘Cleaning and maintenance, section ‘Using the function’.
The OptimalTemp technology enables you to iron all types of ironable
fabrics, in any order, without the need to adjust any temperature setting.
-Fabrics with these symbols are ironable, for example linen, cotton,
polyester, silk, wool, viscose and rayon.
-Fabrics with this symbol are not ironable. These fabrics include synthetic
fabrics such as Spandex or elastane, Spandex-mixed fabrics and
polyolens (e.g. polypropylene), but also prints on garments.
-Do not iron non-ironable fabrics.
ENGLISH 7
You can set different steam settings with the steam slider:
- No steam: to stop steam output when the iron is not in use.
MAX.
- ECO: (specic types only) to save energy, reduce the steam output, and
still have sufcient steam to iron your garments.
- MAX: to set the maximum steam output, perfect combination with
OptimalTemp setting.
For the best results and shortest ironing time, we strongly recommend that
you iron all ironable fabrics at the setting for maximum steam output.
1 Makesurethereisenoughwaterinthewatertank.
2 Push the steam slider to the desired steam setting.
Note:The iron starts to produce steam when the SmartLight lights up blue
steadily.
With the OptimalTemp technology, you can iron every single garment
effectively and safely, even delicate fabrics like silk without having to worry
about temperature settings.
1 YoucanstartironingwhentheSmartLightstopsashingandlights
upbluesteadily.(Seechapter‘Preparingforuse’,section‘Heating
up’).
You can use the spray function to moisten the garment to be ironed. This
helps to remove stubborn creases.
1 Makesurethereisenoughwaterinthewatertank.
2 Pressthespraybuttonseveraltimestomoistenthegarmenttobe
ironed.
ENGLISH8
A steam boost from the soleplate helps removing stubborn creases. The
steam boost enhances the distribution of steam into every part of the
garment.
1 Pressandreleasethesteamboosttrigger.
For optimal steam boost performance, it is recommend to press the steam
boost trigger at intervals of 5 seconds.
1 Forextrasteamduringironing,pressandholdthesteamboost
trigger.
You can also use the steam boost function when you hold the iron in
vertical position.
1 Holdtheironinverticalposition,pressandreleasethesteamtrigger
and touch the garment lightly with the soleplate.
Tip: Pull the garment with one hand to stretch it for more effective wrinkle
removal.
Hotsteamcomesoutoftheiron.Donotremovewrinklesfroma
garmentwhileyouarewearingitorsomebodyelseiswearingit.To
preventburns,donotdirectthesteamatpeople.
To save energy, the appliance switches off automatically when it has not
been moved for 2 minutes in horizontal position, or 3 minutes when is
standing on its heel.
1 TheSmartLightstartspulsatingslowlywhenSafetyAutooffmode
hasbeenactivated.
2 Toreactivatetheiron,simplymoveit.TheSmartLightashesblueto
indicate that the iron is heating up, and it lights up steadily when the
ironisreadyforuse.
Note:The steam iron is not switched off completely when it is in Safety Auto off
mode. Unplug the iron to switch it off.
ENGLISH 9
Start wrinkle removal early in the drying process by spreading out the
laundry properly after washing. Put the garments on hangers to make them
dry naturally with less wrinkles.
Start with the time-consuming parts such as collar, cuff links and sleeves.
Next, iron the bigger parts like front and back. By doing this, you prevent
wrinkling the bigger parts when you are busy ironing the time-consuming
ones.
: When you iron a collar, start on its underside and iron from the
outside (the pointy end) inwards. Turn over and repeat. Fold down the
collar and press the edge for a crisp nish.
Buttons: Iron on the reverse side of the buttons for more effective and
faster ironing.
1 Setthesteamslidertothe‘nosteam’position,removetheplugfrom
the wall socket and let the iron cool down.
2 Wipeakesandanyotherdepositsoffthesoleplatewithadamp
clothandanon-abrasive(liquid)cleaningagent.
Tokeepthesoleplatesmooth,avoidhardcontactwithmetalobjects.Never
useascouringpad,vinegarorotherchemicalstocleanthesoleplate.
3 Cleantheupperpartoftheironwithadampcloth.
4 Regularly rinse the water tank with water. Empty the water tank
afteryouhaverinsedit.
ENGLISH10
Autres manuels pour GC4900
10
Table des matières
Langues :
Autres manuels Philips Fer
Philips
Philips GC240/25 Mode d’emploi
Philips
Philips GC7300 Series Manuel utilisateur
Philips
Philips WardrobeCare GC9950 Manuel utilisateur
Philips
Philips GC9500 Series Manuel utilisateur
Philips
Philips GC6600 series Manuel utilisateur
Philips
Philips PowerLife GC2510 Manuel utilisateur
Philips
Philips GC5030 series Manuel utilisateur
Philips
Philips GC4500 series Manuel utilisateur
Philips
Philips PerfectCare Elite Plus GC9660/30 Manuel utilisateur
Philips
Philips GC1442/27 Manuel utilisateur
Philips
Philips Azur 8000 Series Manuel utilisateur
Philips
Philips GC3800 series Manuel utilisateur
Philips
Philips GC9220/02 Manuel utilisateur
Philips
Philips SpeedCare GC6627 Manuel utilisateur
Philips
Philips FASTCARE COMPACT GC6700 Series Manuel utilisateur
Philips
Philips GC7900 Series Manuel utilisateur
Philips
Philips HI5900 series Manuel utilisateur
Philips
Philips GC6106 Manuel utilisateur
Philips
Philips EasyCare GC8351 Manuel utilisateur
Philips
Philips GC5030 series Manuel utilisateur
