Philips HQ444 Manuel utilisateur

ENGLISH 4
POLSKI 12
ROMÂNĂ 21
РУССКИЙ 29
ČEŠTINA 38
MAGYAR 47
SLOVENSKY 56
УКРАЇНСЬКА 64
HRVATSKI 72
EESTI 80
LATVIEŠU 88
LIETUVIŠKAI 97
SLOVENŠČINA 105
БЪЛГАРСКИ 114
SRPSKI 123
131
HQ444,HQ441 

Important

Read these instructions for use carefully before

using the appliance and save them for future

reference.

◗Only use the mains cord supplied.

◗Do not use a damaged mains cord.

◗If the mains cord is damaged, always have it

replaced by one of the original type in order

to avoid a hazard.

◗The appliance is equipped with an automatic

voltage selector and is suitable for mains

voltages ranging from 100 to 240 volts.

◗Store and use the appliance at a temperature

between 5cC and 35cC.

C◗Keep the appliance and the mains cord dry.

◗Noise level: Lc = 64 dB [A]

Using the appliance

Shaving

C1Put the appliance plug in the shaver.

2Put the mains plug in the wall socket.

C3Switch the appliance on by pressing the

switch lock (1) and pushing the on/off slide

upwards (2).

BThe switch lock prevents accidental switching on of

the appliance.

ENGLISH4

C4Move the shaving heads quickly over your

skin, making both straight and circular

movements.

Shaving on a dry face gives the best results.

Your skin may need 2 or 3 weeks to get

accustomed to the Philips system.

5Switch the shaver off by pushing the on/off

slide downwards.

C6Put the protection cap on the shaver every

time you have used it, to prevent damage.

Trimming

For grooming sideburns and moustache.

C1Open the trimmer by pushing the slide

upwards.

The trimmer can be activated while the motor is

running.

Cleaning and maintenance

Regular cleaning guarantees better shaving

performance.

Every week: shaving unit and hair chamber

1Switch the shaver off, remove the mains

plug from the wall socket and pull the

appliance plug out of the shaver.

ENGLISH 5

C2Clean the top of the appliance first, using

the brush supplied.

C3Press the release button (1) and remove

the shaving unit (2).

C4Clean the inside of the shaving unit and the

hair chamber with the brush.

C5Put the shaving unit back onto the shaver.

Every two months: shaving heads

1Switch the shaver off, remove the mains

plug from the wall socket and pull the

appliance plug out of the shaver.

C2Press the release button (1) and remove

the shaving unit (2).

ENGLISH6

C3Remove the retaining frame by pushing the

sides of the central spring towards each

other (1) and lifting the retaining frame out

of the shaving unit (2).

C4Slide the shaving heads out of the retaining

frame and clean them one by one.

Do not mix up the cutters and the guards.

This is essential since each cutter has been

ground with its corresponding guard for optimal

performance. If you accidentally mix the sets up, it

could take several weeks before optimal shaving

performance is restored.

C5Clean the cutter with the short-bristled

side of the brush.

Brush carefully in the direction of the arrow.

C6Brush the guard.

C7Slide the shaving heads back into the

retaining frame and put the retaining frame

back into the shaving unit.

8Put the shaving unit back onto the shaver.

For extra thorough cleaning, clean the shaving

heads by putting them in a degreasing liquid (e.g.

alcohol) every six months.To remove the shaving

heads, follow steps 1 to 4 described above.

ENGLISH 7

After cleaning, lubricate the central point on the

inside of the guards with a drop of sewing

machine oil to prevent wear of the shaving heads.

Trimmer

Clean the trimmer every time you have used it.

1Switch the shaver off, remove the mains

plug from the wall socket and pull the

appliance plug out of the shaver.

C2Clean the trimmer with the brush

supplied.

C3Lubricate the trimmer teeth with a drop

of sewing machine oil every six months.

Storage

C◗Put the protection cap on the shaver to

prevent damage.

◗HQ444 only:

The appliance can be stored in the luxury pouch

supplied.

Replacement

Replace the shaving heads every two years for

optimal shaving results.

ENGLISH8

Replace damaged or worn shaving heads with

HQ4«Philips shaving heads only.

1Switch the shaver off, remove the mains

plug from the wall socket and pull the

appliance plug out of the shaver.

C2Press the release button (1) and remove

the shaving unit (2).

C3Remove the retaining frame by pushing the

sides of the central spring towards each

other (1) and lifting the retaining frame out

of the shaving unit (2).

C4Slide the shaving heads out of the retaining

frame.

C5Slide new shaving heads into the retaining

frame.

C6Put the retaining frame back into the

shaving unit.

7Put the shaving unit back onto the shaver.

ENGLISH 9

Accessories

The following accessories are available:

- HQ4«Philips shaving heads.

- HQ110 Philips shaving head cleaner

(shaving head cleaning spray).

Environment

C◗Do not throw the appliance away with the

normal household waste at the end of its life,

but hand it in at an official collection point for

recycling. By doing this you will help to

preserve the environment.

Guarantee & service

If you need information or if you have a problem,

please visit the Philips website at www.philips.com

or contact the Philips Customer Care Centre in

your country (you will find its phone number in

the worldwide guarantee leaflet). If there is no

Customer Care Centre in your country, turn to

your local Philips dealer or contact the Service

Department of Philips Domestic Appliances and

Personal Care BV.

Troubleshooting

1Reduced shaving performance

BCause 1: the shaving heads are dirty.

BThe shaver has not been cleaned well enough or

has not been cleaned for a long time.

ENGLISH10

◗Clean the shaver thoroughly before you

continue shaving. See chapter 'Cleaning and

maintenance'.

BCause 2: long hairs are obstructing the shaving

heads.

◗Clean the cutters and guards with the brush

supplied. See chapter 'Cleaning and

maintenance', section 'Every two months:

shaving heads'.

BCause 3: the shaving heads are damaged or worn.

Replace the shaving heads. See chapter

'Replacement'.

2The shaver does not work when the on/off

slide is pushed upwards.

BCause: the shaver is not connected to the mains.

◗Put the mains plug in the wall socket.

ENGLISH 11

Ważne

Przed pierwszym użyciem urządzenia zapoznaj się

dokładnie z jego instrukcją obsługi i zachowaj ją na

wypadek konieczności użycia w przyszłości.

◗Używaj wyłącznie dołączonego przewodu

sieciowego.

◗Nie używaj przewodu sieciowego, jeśli jest

uszkodzony.

◗W przypadku uszkodzenia przewodu

sieciowego wymień go na nowy tego samego

typu w sieci serwis w wsp łpracujących z

Philips Polska Sp z o.o.

◗Urządzenie posiada automatyczny przełącznik

napięcia i jest dostosowane do użytku w

sieciach elektrycznych o napięciu od 100 V do

240 V.

◗Przechowuj urządzenie w temperaturze od

5cC do 35cC.

C◗Przechowuj urządzenie i przew d sieciowy w

suchym miejscu.

◗Poziom hałasu: Lc = 64 dB [A]

Zasady używan a

Golenie

C1Podłącz wtyczkę przewodu sieciowego do

golarki.

2Wł ż wtyczkę przewodu sieciowego do

gniazdka elektrycznego.

POLSKI12

Autres manuels pour HQ444

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Rasoir électrique

Philips

Philips S1070 Manuel utilisateur

Philips

Philips Philishave Turbovac HQT885 Manuel utilisateur

Philips

Philips BT1005 Manuel utilisateur

Philips

Philips S8850 Manuel utilisateur

Philips

Philips PQ206 Manuel utilisateur

Philips

Philips RQ1290 Series Manuel utilisateur

Philips

Philips HQ6990 Manuel utilisateur

Philips

Philips NT5650 Manuel utilisateur

Philips

Philips PT866 Manuel utilisateur

Philips

Philips Norelco Speed-XL 8160XLCC Manuel utilisateur

Philips

Philips SW5700 Manuel utilisateur

Philips

Philips QP6523 Manuel utilisateur

Philips

Philips ProStyler 7 Manuel utilisateur

Philips

Philips HP6479 Manuel utilisateur

Philips

Philips HQ564/16 Manuel utilisateur

Philips

Philips qs6161 Manuel utilisateur

Philips

Philips Beolink 1000 Mode d’emploi

Philips

Philips OneBlade QP2530 Manuel utilisateur

Philips

Philips SmartClick YS527 Manuel utilisateur

Philips

Philips SP9820/18 Manuel utilisateur

Philips

Philips HQT162/60 Manuel utilisateur

Philips

Philips Bikini Perfect HP6362 Manuel utilisateur

Philips

Philips PT715 Manuel utilisateur

Philips

Philips YS536 Manuel utilisateur

Manuels Rasoir électrique populaires d'autres marques

Norelco

Norelco Quadra 7610X Manuel utilisateur

Braun

Braun WaterFlex WF2s Manuel utilisateur

Daga

Daga MT-400 Manuel

Remington

Remington BHT100 Manuel utilisateur

Kompernass

Kompernass KH 5537 Manuel utilisateur

Remington

Remington BHT6100 Manuel utilisateur

MIA

MIA Aqua Body Manuel utilisateur

Matheo

Matheo MLR 15 Manuel utilisateur

CTC Union

CTC Union Clatronic HSM 3441 NE Manuel utilisateur

Remington

Remington XR7000 Manuel utilisateur

Eldom

Eldom G47 Manuel utilisateur

Braun

Braun silk-epil 5 Manuel utilisateur

SEVERIN

SEVERIN SÉRIE E700 0533 Guide de l'utilisateur

Remington

Remington PR1355 Manuel utilisateur

Aurora

Aurora AU 3543 Manuel utilisateur

Braun

Braun InterFace 3614 Manuel utilisateur

Wahl

Wahl 8061 5-STAR Manuel utilisateur

Norelco

Norelco 4404LC Manuel utilisateur