Philips MCD 289/12 Manuel utilisateur
SLOW
ANGLE
DISPLAY
MUTE
STANDBY-ON
MCD 289
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
2
User Manual
1
Quick Start Guide
A/V cord (R/W/Y) Remote control with two AAA
batteries
FM wire antenna
AC power cord
(for subwoofer)
Stand
User manual
Quick start guide
Power adapter
(for main set)
Step A Connect
Step C Enjoy
Step B Setup
MCD289 QUG_Eng-12 2009.10.16, 9:501
AUDIO
IN
S-VIDEO
IN
VIDEOIN
TVIN
AUDIO
IN
S-VIDEO
IN
VIDEO IN
TV IN
1
2
3
44
6
Tips
–See the User Manual for other TV
connection options.
–For connecting to a Progressive ScanTV,
refer to the user manual for proper
connections and detailed setup.
–See “Connect - Place the unit” in the
user manual for details about set and
speaker assembly.
– See the attached Wall Mounting
Instruction if you want to mount the set and
speakers onto wall.
– In case of wireless connection failure
between the main set and subwoofer, see
the User Manual for manual pairing (“Get
started -Turn on”).
2
5
3
Setting up the TV
1
2
Press SOURCE (DISC on the remote control) to select disc source.
Turn on the TV and set it to the correct Video In channel.
SLOW
ANGLE
DISPLAY
MUTE
STANDBY-ON
1
6
Power on both the main set and subwoofer.
➜Wireless connection will set up automatically.
AC power
Speaker
(right)
Speaker
(left)
FM antenna
AC power
Red
White
4
Connect the speaker cables.
Connect the FM antenna.
Connect the A/V cord to a TV.
Connect the power cords of the system and TV.
Assemble the main set.
5
Step B Setup
Step A Connect
MCD289 QUG_Eng-12 2009.10.16, 9:502
1
2
3
4
In standby mode, press and hold CLOCK on the remote control.
When the hour digits flash, press VOLUME-/+ (VOL+/- on the remote control) to set the
hours.
Press CLOCK again and the minute digits flash.Then press VOLUME-/+ (VOL+/- on the
remote) to set the minutes.
Press CLOCK again to confirm the time setting.
IMPORTANT!
– To set clock in the Eco Power mode, press and hold STANDBY-ON/ECO POWER
2
on the set for
3 seconds or more to switch to normal standby mode first before proceeding with the procedures
below.
Setting the clock
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive
signals or the cables are not connected accordingly, see the user manual for proper progressive
scan setup or deactivate the progressive scan feature as below:
1)Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit
progressive scan.
Tip
See chapters "Get started" and "Adjust
settings" in the User Manual for detailed
descriptions.
SLOW
ANGLE
RDS
DISPLAY
MUTE
STANDBY-ON
DIVX (R) VOD
3D
DIGITAL AUDIO SETUP
ANALOG AUDIO SETUP
PICTURE SETTING
Step B Setup
MCD289 QUG_Eng-12 2009.10.16, 9:503
Playing a disc
1
2
3
Insert a disc into the slot loader.
➜Make sure the label side is facing you.
➜Make sure you have removed any other disc from the slot loader.
Playback will start automatically. If not pressÉÅ.
To stop playback, press 9.
Programming and tuning to radio stations
1
2
3
Press SOURCE (TUNER on the remote control) to select tuner source.
Press PROGRAM for more than two seconds to program all available stations in order of waveband.
Press PRESET ¡/ ™until the desired preset station is displayed.
1
2
3
Insert the USB device’s USB plug into the socket on the set.
Press SOURCE once or more to select USB (or USB on the remote control).
Play the USB’s audio files as you do with the albums/tracks on a CD,
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
IMPORTANT!
Slide down to
expose some
buttons and jacks on
the front panel!
Tip
Detailed playback features and additional functions are
described in the accompany owner's manual.
MCD289_12_QSG_V3.0
P
r
i
n
t
e
d
S
i
d
e
Step C Enjoy
MCD289 QUG_Eng-12 2009.10.16, 9:504
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Philips Lecteur DVD
Philips
Philips DVP3000/69 Manuel utilisateur
Philips
Philips DVDR3575H/ Manuel utilisateur
Philips
Philips DVP2850/F8 Manuel utilisateur
Philips
Philips DVP3510 Manuel utilisateur
Philips
Philips DVDR3480 Manuel utilisateur
Philips
Philips DVD-712 Manuel utilisateur
Philips
Philips DVP3100/98 Manuel utilisateur
Philips
Philips DVD737 Manuel utilisateur
Philips
Philips DVDR3600 Manuel utilisateur
Philips
Philips DVP3556 Manuel utilisateur
Philips
Philips DVDR3383 Manuel utilisateur
Philips
Philips PET836 Manuel d'utilisation
Philips
Philips DVP3820 Manuel utilisateur
Philips
Philips DVP3680KX Manuel utilisateur
Philips
Philips DVP5500S/93 Manuel utilisateur
Philips
Philips DVP3500 Manuel utilisateur
Philips
Philips DVD405 Manuel utilisateur
Philips
Philips DVP3266 Manuel utilisateur
Philips
Philips DVP 5140K Manuel utilisateur
Philips
Philips DVP1120/94 Manuel utilisateur
