Philips AJT3300/79 Manuel utilisateur

www.philips.com/support

User manual

Always there to help you

AJT3300

Question?

Contact

Philips

1EN

Contents

1 Important 3

Safety 3

2 Your clock radio 4

Introduction 4

What's in the box 4

Overview of the clock radio 5

3 Get started 6

Install battery 6

Connect power 6

Turn on 6

Set time 7

4 Listen to FM radio 7

Tune to FM radio stations 7

Store FM radio stations in memory 7

Select a preset radio station 8

5 Use Bluetooth devices 8

Connect a device 8

Play audio from Bluetooth-enabled device 9

Clear the pairing information 9

Control your phone call 9

6 Other features 10

Charge your mobile devices 10

Listen to an external device 11

Set alarm timer 11

Set sleep timer 12

Adjust volume 12

7 Product information 12

Specications 12

8 Troubleshooting 13

General 13

About Bluetooth device 14

9 Notice 14

Disposal of your old product and

batteries 14

2EN

1 Important

Safety

Know these safety symbols

This 'bolt of lightning' indicates uninsulated

material within your unit may cause an electrical

shock. For the safety of everyone in your

household, please do not remove product

covering.

The 'exclamation point' calls attention to

features for which you should read the enclosed

literature closely to prevent operating and

maintenance problems.

WARNING:Toreducetheriskofreorelectric

shock, this apparatus should not be exposed to

rainormoistureandobjectslledwithliquids,

such as vases, should not be placed on this

apparatus.

CAUTION:To prevent electric shock, match

wide blade of plug to wide slot, fully insert.

Warning

•Never remove the casing of this clock radio.

•Never lubricate any part of this clock radio.

•Never place this clock radio on other electrical

equipment.

•Keep this clock radio away from direct sunlight, naked

amesorheat.

•Make sure that you always have easy access to the

power cord, plug or adaptor to disconnect the clock

radio from the power.

• Make sure that there is enough free space

around the product for ventilation.

• Battery usage CAUTION – To prevent

battery leakage which may result in bodily

injury, property damage, or damage to the

clock radio:

• Install the batteries correctly, + and - as

marked on the clock radio.

• Do not mix batteries (old and new or

carbon and alkaline, etc.).

• Remove the batteries when the clock

radio is not used for a long time.

• The batteries shall not be exposed to

excessiveheatsuchassunshine,reor

the like.

• Use only power supplies listed in the user

manual.

• The clock radio shall not be exposed to

dripping or splashing.

• Do not place any sources of danger on the

clockradio(e.g.liquidlledobjects,lighted

candles).

• Where the plug of the Direct Plug-in

Adapter is used as the disconnect device,

the disconnect device shall remain readily

operable.

3EN

2 Your clock radio

Congratulations on your purchase, and

welcometoPhilips!Tofullybenetfromthe

support that Philips offers, register your product

at www.philips.com/welcome.

Introduction

With this clock radio, you can

• play audio from Bluetooth-enabled devices,

or other external devices;

• listen to FM radio;

• charge your mobile devices; and

• set two alarms to ring at different time.

What's in the box

Check and identify the contents of your

package.

4EN

Overview of the clock radio

a Dock for charging mobile devices

b PLAY/PAUSE

• Answer, reject, or end an incoming call.

• In Bluetooth mode, start, pause, or

resume play.

c SOURCE

• Turn on the clock radio.

• Switch the clock radio to standby

mode.

• Select a source: Bluetooth, FM tuner,

or Aux.

d PRESET/SET TIME

• Store radio stations in memory.

• Select a preset radio station.

• Set time.

• Disconnect Bluetooth connection.

• Enter Bluetooth pairing mode.

f AL1/AL2/- VOLUME +

• Set alarm.

• Adjust volume.

g HR/MIN/- TUNE +

• Tune to FM radio stations.

• Set hour and minute.

h SNOOZE/SLEEP

• Snooze alarm.

• Set the sleep timer.

i Display panel

• Display current status.

5EN

3 Get started

Always follow the instructions in this chapter in

sequence.

Install battery

The batteries can only back up clock and alarm

settings when AC power is disconnected.

Caution

•The batteries contain chemical substances, so they

should be disposed of properly.

1 Open the battery compartment.

2 Insert 2 AA batteries with correct polarity

(+/-) as illustrated.

3 Close the battery compartment.

Tip

•When the low battery indicator is displayed, replace

the batteries.

•The display backlight is off when AC power is

disconnected.

Connect power

Caution

•Risk of product damage! Make sure that the power

voltage corresponds to the voltage printed on the back

or underside of the clock radio.

•Risk of electric shock! When you unplug the AC

adapter, always pull the plug from the socket. Never

pull the cord.

Connect the AC power adaptor to the wall

socket.

Turn on

Press to turn on the clock radio.

» The clock radio switches to the last

selected source.

• To select another source, press

repeatedly to switch to Bluetooth, FM,

or Aux mode.

Switch to standby mode

• Press again.

• In Bluetooth mode, if Bluetooth connection

is invalid or music playback is stopped

for 15 minutes, this product switches to

standby mode automatically.

• In Aux mode, if the audio-in cable is

disconnected or music playback is stopped

for 15 minutes, this product switches to

standby mode automatically.

6EN

Set time

Note

•You can only set time in standby mode.

1 Press and hold SET TIME for two seconds

to activate clock setting mode.

» The hour and minute digits blink.

2 Press HR repeatedly to set hour.

3 Press MIN repeatedly to set minute.

4 Press SET TIMEagaintoconrm.

» The set time is displayed.

Note

•The clock radio exits time setting mode when being

idle for 10 seconds.

4 Listen to FM

radio

Note

•Keep the clock radio away from other electronic

devices to avoid radio interference.

•For better reception, fully extend and adjust the

position of the FM antenna.

Tune to FM radio stations

1 Press SOURCE repeatedly to switch to FM

tuner mode.

2 Press and hold TUNE - or TUNE + for 2

seconds.

» The clock radio tunes to a station with

strong reception automatically.

3 Repeat step 2 to tune to more radio

stations.

To tune to a station manually:

In tuner mode, press TUNE - or TUNE +

repeatedlytoselectafrequency.

Store FM radio stations in

memory

You can store up to 10 FM radio stations.

1 Tune to an FM radio station.

2 Press and hold PRESET for two seconds.

» The preset number begins to blink.

3 Press TUNE - or TUNE + to select a

number.

4 Press PRESETagaintoconrm.

5 Repeat steps 1 to 4 to store other stations.

Tip

•To remove a pre-stored station, store another station

in its place.

7EN

Select a preset radio station

In tuner mode, press PRESET repeatedly to

select a preset station.

5 Use Bluetooth

devices

With this clock radio, you can listen to audio

from Bluetooth-enabled devices and control the

incoming call through Bluetooth.

Connect a device

Note

•Make sure that your Bluetooth device is compatible

with this product.

•Before pairing a device with this product, read its user

manual for Bluetooth compatibility.

•This product can memorize a maximum of 4 paired

devices.

•Make sure that Bluetooth function is enabled on your

device, and your device is set as visible to all other

Bluetooth devices.

•The operational range between this product and a

Bluetooth device is approximately 10 meters (30 feet).

•Any obstacle between this product and a Bluetooth

device can reduce the operational range.

•Keep away from any other electronic device that may

cause interference.

1 Press SOURCE repeatedly to select

Bluetooth mode.

» [BT] (Bluetooth)ashesonthedisplay.

2 On your Bluetooth device, enable

Bluetooth and search for Bluetooth devices

(refer to the user manual of the device).

3 When [AJT3300] is displayed on your

device, select it to start pairing and

connection. If necessary, enter default

password “0000”.

» After successful pairing and connection,

[BT] (Bluetooth)stopsashing,and

the clock radio beeps twice.

8EN

Note

•If your Bluetooth device has been paired with AJT3300

before,youjustneedtondout[AJT3300] on your

Bluetooth menu, then start the connection.

To disconnect the Bluetooth-enabled device:

• Press and hold for 3 seconds;

• Disable Bluetooth on your device; or

• Move the device beyond the

communication range.

To connect another Bluetooth-enabled device:

1 Press and hold for 3 seconds to

disconnect the currently connected device.

» The clock radio enters Bluetooth

pairing mode.

2 Connect another Bluetooth device.

Play audio from Bluetooth-

enabled device

Note

•If there is an incoming call on the connected mobile

phone, music play pauses.

After successful Bluetooth connection, play

audio on the Bluetooth device.

» Audio comes out from the clock radio.

• You can press PLAY/PAUSE to start,

pause or resume play.

Control your phone call

After Bluetooth connection, you can control

your incoming phone call with this product.

Button Function

Press to answer an incoming call.

During a call, press to end the

current call.

Press and hold to reject an incoming

call.

Note

•Music play pauses when there is an incoming call.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Station d'accueil

Philips

Philips DTM3170 Manuel utilisateur

Philips

Philips AJ300D/37B Manuel utilisateur

Philips

Philips DCM250/12 Manuel utilisateur

Philips

Philips AJ5300D/37 Manuel utilisateur

Philips

Philips MCM138D/05 Manuel utilisateur

Philips

Philips DCM109/93 Manuel utilisateur

Philips

Philips AZ1330D Manuel utilisateur

Philips

Philips DC190 Instructions de montage

Philips

Philips SBD8000/05 Manuel utilisateur

Philips

Philips DCP746/37 Manuel utilisateur

Philips

Philips AJ301DB Manuel utilisateur

Philips

Philips DC-291 Manuel utilisateur

Philips

Philips DC-291 Manuel utilisateur

Philips

Philips DC146 Manuel utilisateur

Philips

Philips DCP746 Manuel utilisateur

Philips

Philips DC190/12 Manuel utilisateur

Philips

Philips DCB310/05 Manuel utilisateur

Philips

Philips DC910 Manuel utilisateur

Philips

Philips Streamium DC1050/12 Manuel utilisateur

Philips

Philips HTS3220 Manuel utilisateur

Philips

Philips DC290 Manuel utilisateur

Philips

Philips DC-390 Manuel utilisateur

Philips

Philips DCB 2070 - Manuel utilisateur

Philips

Philips DC570 Manuel utilisateur

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur

Sirius Satellite Radio

Sirius Satellite Radio SUBX2082808a Manuel utilisateur

OWC

OWC Thunderbolt Dock Manuel utilisateur