Philips 9290 014 61062 Manuel utilisateur

Wireless Controller

Wireless

9290 014 61062

1. Communication distance: 15-30M

Toggle switch

Socket for software update

Battery

Remote controller

Rear plate

Magnet end cap

Remove the battery gently with your hand. Put the new battery into the lower part of the left spring plate first and pushing it from the

right side for installing

Installation guide

Parts description

Battery exchanged

For detailed information of APP , please refer to ：

www.beesmart.com.hk:88

12 NC

9290 014 61062

The information provided herein is subject to change, without notice. Signify does not give any representation or warranty

as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance

thereon. The information presented in this document is not intended as any commercial offer and does not form part of

any quotation or contract, unless otherwise agreed by Signify.Philips and the Philips Shield Emblem are registered trademarks

of Koninklijke Philips N.V. All other trademarks are owned by Signify Holding or their respective owners.

www.philips.com/lighting

02 Select One Option

05 Input MAC CODE

New product can be located after

successful adding

Network overtime or searching failure

warning,please check again

03 scan

06 Select Zone

01 Add Product

04 Search

07 Successful Adding 08 Adding Failure

Product configuration

Check Gateway and

compatibility

enviromnent

Check product power-on condition

Retry after few seconds

First to dial down the toggle switch so that the controller is in normal remote-control mode

1 . ① key is group 1, press it to control those lamps in the group

Dial up the toggle switch on the back, press 6 key until the LED is flicker under the ⑥ key, which means the remote controller has

been restored to original state

1 . Searching and adding new equipment in APP , Gateway open the Zigbee mesh network

2 . Turning the ① key slide switch on the back to the up, press ⑤ key on the front of remote and then the LED will flicker and

the remote search network. The LEDs will go out immediately after flashed six times. It mean the equipment is into

the mesh network

4 . ④ key is tunable white, press it to switch 2700k --3500K-4000K-5000K-6000K on the lamp

2 . ② key is group 2, press it to control those lamps in the group

5 . ⑤ key is RGBW, press it to switch red-green-blue-cyan-Purple on the lamp

7 . ⑦ key is Is dim up, keep pressing the key to dim up gradually. When luminaire is turned off,

it will light up automatically

3 . ③ key is group 3, press it to control those lamps in the group

6 . ⑥ key is On/Off keys, press it to control the lamp

8 . key is Dim down,, keep pressing the key to Dim down gradually. It will turn on when the state

is off at the lamp

⑧

Keys instruction

Accessing Zigbee mesh network

Turn the slide switch downward on the back first

Press ①、② and ③ keys which are equipment group and then LED under button will brighten up for a second.

Press ④、⑤、⑥、⑦ and ⑧ keys to control equipment and dimming amp

Control

Autres manuels Philips Contrôleurs

Philips

Philips DYNALITE DMC4 Manuel de service

Philips

Philips Dynalite DDRC810DT-GL Manuel utilisateur

Philips

Philips ColourChaser Touch Manuel utilisateur

Philips

Philips DYNALITE DDRC1220FR-GL Manuel utilisateur

Philips

Philips Dynalite Revolution DR2PE Manuel utilisateur

Philips

Philips Dynalite DDBC300-DALI Manuel utilisateur

Philips

Philips ColorDial Pro Manuel utilisateur

Philips

Philips Dynalite DDBC516FR Manuel utilisateur

Philips

Philips dynalite DBC1210 Manuel utilisateur

Philips

Philips CoralCare Instructions de montage

Philips

Philips 9890 000 0268 Series Manuel utilisateur

Philips

Philips Dynalite DMRC210 Manuel utilisateur

Philips

Philips Dynalite DDLE801 Manuel utilisateur

Philips

Philips dynalite DALI DDBC120-DALI Manuel utilisateur

Philips

Philips Dynalite DMC2 Manuel utilisateur

Philips

Philips CoralCare Manuel utilisateur

Philips

Philips dynalite DBC1220GL Manuel utilisateur

Philips

Philips Dynalite DMC-GRMS-UL Manuel utilisateur

Philips

Philips dynalite DDC116 Manuel utilisateur

Philips

Philips LFH 2305 Manuel utilisateur

Philips

Philips Light System Manager Manuel utilisateur

Philips

Philips ISP1362 Manuel utilisateur

Philips

Philips Dynalite Revolution Series Manuel utilisateur

Philips

Philips TDA8002C Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur