Philips CEM2000/55 Manuel utilisateur

EN Quick Start Guide

1ab

efg

bcd

5mm5mm5mm5mm

5mm

Overview of parts 1

These are the supplied parts needed to connect

and install this unit.

aIn-car audio system

b Sleeve

c Front panel

d Standard ISO connector

e Trim plate

f Rubber cushion

g Disassembly tools

h Screws (4 pieces)

Select country/region

1Press

to turn on the unit.

2 Rotate

to select an option:

[USA] (United States)•

[Latin] (Latin America)•

[Europe] (Western Europe)•

[ASIA] (Asia Paciﬁc)•

[Mid-East ] (Middle East)•

[Russia] (Russia)•

3 Press

to conﬁrm.

Connection

Caution

• Ensure that all loose leads are insulated with

electrical tape.

For cars with ISO connectors 234

1Pull out the ISO connectors from car

dashboard and connect them to the bigger

end of the supplied standard connector.

2Connect the other end of the supplied

standard connector to the unit.

3Connect the antenna and ampliﬁer as

illustrated, if applicable.You can connect the

car audio to the ampliﬁer through RCA-TO-

RCA cables (not supplied).

Connector Connect to

1ANTENNA Antenna

2FRONT LINE

OUT R (Socket)

Front right speaker

3FRONT LINE

OUT L (Socket)

Front left speaker

4REAR LINE

OUT R (Socket)

Rear right speaker

5REAR LINE

OUT L (Socket)

Rear left speaker

6SUBWOOFER Subwoofer

For cars with ISO connectors 45

Caution

• Be sure to connect the black ground (earth)

lead ﬁrst.

1Connect the antenna and ampliﬁer as

illustrated, if applicable.

2Cut off the bigger end of the supplied

standard connector.

3Check the car’s wiring carefully and connect

them to the supplied standard connector.

4Connect the supplied standard connector to

the unit.

1Green/black strip Left speaker (Rear)

2White/black strip Left speaker (Front)

3Gray/black strip Right speaker (Front)

4Purple/black strip Right speaker (Rear)

eRED Ignition key +12V DC when

ON/ACC

fBLUE Motor/electric antenna relay

control lead/Ampliﬁer relay

control lead

gBLACK Ground

hYELLOW To the +12V car battery

which is energized at all times

Mount in the dashboard 6

1If the car does not have an on-board drive

or navigation computer, disconnect the

negative terminal of the car battery.

If you disconnect the car battery in•

a car that has an on-board drive or

navigation computer, the computer

may lose its memory.

If the car battery is not disconnected,•

to avoid short-circuit, ensure that bare

wires do not touch each other.

2Remove the two screws on the top of the

unit.

3Remove the mounting sleeve with the

supplied disassembly tools.

4Install the sleeve into the dashboard and

bend the tabs outward to ﬁx the sleeve.

5Place the supplied rubber cushion over the

end of the mounting bolt.

6Slide the unit into the dashboard until you

hear a click sound.

7Reconnect the negative terminal of the car

battery.

Attach the front panel 6

1Attach the trim plate.

2Insert the right side of the panel in the

chassis until it is correctly engaged.

3Press the left side of the panel until the

mechanism locks it into place.

Turn on

1Press

to turn on the unit.

To turn off the unit, press• for over 3

seconds.

Set clock

1Press MENU.

2Press

or repeatedly until currently time

is displayed.

3Tu r n

clockwise to set hour.

4Press

to conﬁrm.

5Tu r n anti-clockwise to set minute.

6Press

to conﬁrm.

View clock

1Press and hold OPTIONS repeatedly until

the clock is displayed.

Listen to radio

1Press SOURCE repeatedly to select Tuner.

2Press

or to select band: [FM1], [FM2],

[FM3], [AM1], or [AM2] .

3Press or to tune to a radio station

manually.

The radio station is broadcast.•

To search for a radio station•

automatically, press or for over

3 seconds.

Document order number: CEM2000_55_QSG_V2.1

Autres manuels pour CEM2000/55

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Récepteur de voiture

Philips

Philips 90RC438 Manuel utilisateur

Philips

Philips CEM2101/10 Manuel utilisateur

Philips

Philips CEM3000 Manuel utilisateur

Philips

Philips CEM2250/51 Manuel utilisateur

Philips

Philips CEM2220BT/55 Manuel utilisateur

Philips

Philips CEM2100 Manuel utilisateur

Philips

Philips CED228/58 Manuel utilisateur

Philips

Philips CEM200 Manuel utilisateur

Philips

Philips CEM1100/00 Manuel utilisateur

Philips

Philips CID2680 Manuel utilisateur

Philips

Philips CE120X/78 Manuel utilisateur

Philips

Philips CarStudio CMD305A Manuel utilisateur

Philips

Philips CE151 Manuel utilisateur

Philips

Philips CEM210 Manuel utilisateur

Philips

Philips CEM5000/00 Manuel utilisateur

Philips

Philips CarStudio CEM2101R/51 Manuel utilisateur

Philips

Philips CarStudio CE233/19 Manuel utilisateur

Philips

Philips CarStudio CEM2250 Manuel utilisateur

Philips

Philips CEM3000B Manuel utilisateur

Philips

Philips CEM2090 Manuel utilisateur

Philips

Philips CE600BT Manuel utilisateur

Philips

Philips CED750/55 Manuel utilisateur

Philips

Philips CarStudio CEM3100 Manuel utilisateur

Philips

Philips CID3282/93 Manuel utilisateur

Manuels Récepteur de voiture populaires d'autres marques

Motorola

Motorola VWA63 Manuel utilisateur

Nextar

Nextar D3201 Manuel utilisateur

Alpine

Alpine CDE-163BT Manuel utilisateur

Pioneer

Pioneer DEH-P645R Manuel utilisateur

Axxera

Axxera XDMA7600 Mode d'emploi

XM OnyX Manuel utilisateur

Sound Storm

Sound Storm STM93R Manuel utilisateur

Soundstream

Soundstream VIR-5000 Manuel utilisateur

Avson

Avson MKT Platform Manuel utilisateur

Sony

Sony MEX-1HD - Audio Library System Manuel utilisateur

Pioneer

Pioneer DVH-P500UB Manuel utilisateur

JVC

JVC KD-AHD69 Manuel utilisateur

Blaupunkt

Blaupunkt SANTIAGO CR 87 Manuel utilisateur

Sony

Sony CDX-4160 - Cd Receiver Manuel utilisateur

XFIRE AUDIO

XFIRE AUDIO BMW42S Manuel utilisateur

VDO

VDO CD 2253 Manuel utilisateur

Volvo

Volvo 13 84 580 Manuel utilisateur

ZENEC

ZENEC ZE-160DVD Manuel utilisateur