Philips SBCSC250/00 Manuel utilisateur

ultra fast bottle warmer

SC250

SBC

Instructions for use

English 4

Instructions pour l’utilisation

Français 10

Modo de empleo

Español 16

Bedienungsanleitung

Deutsch 22

Gebruiksaanwijzing

Nederlands 28

Istruzioni per l’uso

Italiano 34

Instruções de uso

Português 40

 

 46

Bruksanvisning

Svenska 52

Vejledning

Dansk 58

Bruksanvisning

Norsk 64

Käyttöohje

Suomi 70

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 1

☎Helpline www.p4c.philips.com

België/Belgien/Belgique

070 222 303

Danmark

808 82814

Deutschland

0180 535 6767

España

902 113 384

France

0825 889789



0 0800 3122 1280

Ireland

0176 40292

Italia

199 11 88 99

Nederland

0900-8406

Norge

2274 8250

Österreich

0810 001 203

Portugal

2 1416 3033

Schweiz/ Suisse/ Svizzera

0844 800 544

Suomi

09 6158 0250

Sverige

08 5985 2250

UK (United Kingdom)

0870 900 9070

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 2

180-250ml

110-180ml

50-110ml

10ml =

20ml =

20ºC/10ºC 10ml/20ml

20ºC 10ml

10ºC

20ml

180-250ml

110-180ml

50-110ml

Max. 1 hr.

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 3

Functional Overview - Product illustration on inside flap

1Bottle and jar lifter

2Hand grips

3Mains plug

4Click-step control knob

5Indicator lamp

6Ring with water cup

7Container

8Cable reservoir

Important Safeguards

•Read and save these instructions

•Never use the unit without water in it.

•Do not touch hot surfaces. Use handles or grips.

•Do not move an appliance containing hot liquids.

•Do not immerse appliance, cord or plugs in water or other

liquid.

•Close supervision is necessary when the unit is used near

children.

•Do not let cord hang over edge of table or counter.

•Do not place on hot surfaces or in a heated oven.

•Test food on inside of hand before serving to ensure it is at a

safe temperature for your baby.

•Use only containers that have been approved for boiling.

•Only use the Baby Bottle Warmer when the ambient

temperature is between +7ºC and +37ºC.

ENGLISH4

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 4

Installation

Before connecting the Baby Bottle Warmer to the mains, check to

ensure that the mains outlet is 230V AC.

1Place the Baby Bottle Warmer out of the reach of children

and on a dry, non-slip, horizontal surface.

2Turn the click-step control knob 4to the left to the

‘0’ (OFF) position.

> The indicator lamp lights green.

3Unreel the required cable length from the cable reservoir 8

and plug into the mains outlet.

Operation

Warming of baby bottles

1Turn the click-step control knob 4to the left to the

‘0’ (OFF) position.

2Connect the bottle warmer to the mains socket.

> The indicator lamp lights green.

3Fill the beaker with 10 or 20ml water by using the water cup

of the ring 6.The content is depending on the bottle filling

and start temperature (see Heating Overview on page 3).

4Place the bottle in the middle of the beaker and put the ring

6on top of it.

5Use the click-step control knob 4to set the correct setting

(see Heating Overview on page 3).

> The indicator lamp lights red.

> When the right temperature is reached the indicator lamp

will light green.

6Remove the bottle from the container and turn the control

knob to the ‘0’ (OFF) position.

ENGLISH 5

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 5

7Shake the bottle a little bit to distribute the heat evenly

before you allow your baby to drink.

8Check that the contents of the bottle are the correct

temperature by pouring a few drops on the back of your

hand.

Notes!

– The ring ensures that the hot steam heats up the bottle extremely

fast to the right temperature.Warming the bottle without the ring,

might result in a wrong temperature, therefore never use the bottle

warmer without the ring.

– The dimensions of the bottle or the material of the bottle (glass in

stead of plastic) may influence selecting the correct knob setting.

Therefore always control the end temperature and adjust the setting

of the knob.

Warning! When you leave the bottle in the bottle warmer after it is

heated up, the temperature might increase a few degrees.

Warming baby food jars

1Turn the click-step control knob 4to the left to the

‘0’ (OFF) position.

2Connect the bottle warmer to the mains socket.

> The indicator lamp lights green.

3Remove the label and lid from the jar.

4Fill the beaker with 20ml water by using the water cup of the

ring.

5Place the jar in the middle of the container and put the ring

on top of it.

6Set the click-step control knob to the symbol.

> The indicator lamp lights red.

> When the right temperature is reached the indicator lamp

will light green.

ENGLISH6

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 6

7Remove the jar from the container and turn the control

knob to the left to the ‘0’ (OFF) position.

8Stir the contents of the jar to distribute the heat.

9Always check that the contents of the jar are at the correct

temperature by testing some on the back of your hand or via

your mouth.

10 If the temperature is much too low, fill the beaker again with

10ml.Turn the click-step control knob 4to the right until

the indicator lamp lights up red to start the heating up again.

Note! The ring ensures that the hot steam heats up the jar extremely

fast to the right temperature.Warming the jar without the ring,

might result in a wrong temperature, therefore never use the

bottle warmer without the ring.

Keeping warm

With the Baby Bottle Warmer you can also keep the bottles and

jars warm for a short time.

To do this set the control knob to the symbol. Do not add

water.The thermostat ensures that the set temperature is

maintained. For microbiological and hygienic reasons baby food

should never be kept warm for longer than one hour.

Note! Never hold the Baby Bottle Warmer in your hands when in use.

ENGLISH 7

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 7

Maintenance

Cleaning

•Disconnect the Baby Bottle Warmer from the mains socket

and allow it to cool down. Clean the container and the

outside of the Baby Bottle Warmer with a damp cloth.

Notes: – Never immerse the Baby Bottle Warmer in water.

– Do not use cleaning or scouring agents.

Warning: If a fault occurs, consult a Philips’ service centre. Under no

circumstances should you try to repair the Bottle Warmer

yourself; do not dismantle. Servicing should be performed by

qualified service personnel only.

Technical Specifications

Power supply (mains): 220-240V AC

Power consumption (mains): 250 Watts

Operational ambient temperature: between +7°C and +37°C

Protection: PTC temperature controlled

heating system

ENGLISH8

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 8

Problem solving

Problem Solution

Temperature too low. • Turn the click-step control knob

4to the right until the indicator

lamp lights up red to start the

heating up again.

• Check ring filling and start

temperature.

Temperature too high. • Lower the adjustment setting.

• Check ring filling and start

temperature.

The jar has not been Stir the contents from time to time

heated correctly. while heating. Check that the

click-step control knob is in the

position.

Unit does not warm up. Wait 15 minutes between

consecutive uses to allow the safety

cut-out to reset.

The indicator light This is normal; it may turn on or off

switches on and off while heating.

while keeping warm.

Indicator light does not Shield indicator from ambient light

seem to light. to improve visibility.

The bottom of the tank Hard water deposits are normal

is spotted. and may increase if your water is

very hard; remove the deposits

periodically with white vinegar

(see maintenance).

ENGLISH 9

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 9

Fonctionnement -

Illustration du produit sur le rabat intérieur

1Biberon et élévateur de pot

2Poignées

3Fiche secteur

4Sélecteur à déclic

5Témoin

6Bague avec cuillère de mesure

7Conteneur

8Cable reservoir

Mesures de sécurité importantes

•Lire et conserver ces instructions.

•Ne jamais utiliser l’appareil sans qu’il soit rempli d’eau.

•Ne pas toucher les surfaces chaudes. Utiliser les leviers ou

les poignées.

•Ne pas déplacer un appareil contenant des liquides chauds.

•Ne pas immerger l’appareil, le cordon ou la fiche dans de

l’eau ou tout autre liquide.

•Surveillance rigoureuse nécessaire lorsque l’appareil est

utilisé à proximité d’enfants.

•Ne pas laisser le cordon d’alimentation pendre sur le bord

d’une table ou d’un plan de travail.

•Ne pas mettre sur des surfaces chaudes ou dans un four

chaud.

•Tester la température de l’aliment sur la paume de la main

avant de servir pour être sûr qu’il n’y a pas de danger pour

votre bébé.

•Utiliser uniquement des récipients approuvés pour ébullition.

•Utiliser uniquement le chauffe-biberon lorsque la

température ambiante est entre +7ºC et +37ºC.

FRANÇAIS10

SBC SC250_booklet.qxd 02-02-2004 16:04 Pagina 10

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Philips Chauffe-biberon

Philips

Philips SCF 215 Manuel utilisateur

Philips

Philips SCD278/00 Manuel utilisateur

Philips

Philips AVENT SCF355/07 Manuel utilisateur

Philips

Philips AVENT scf356 Manuel utilisateur

Philips

Philips SCF355 Manuel utilisateur

Philips

Philips SBC SC215 Manuel utilisateur

Philips

Philips SCF282/22 Manuel utilisateur

Philips

Philips SBC SC215 Manuel utilisateur

Philips

Philips AVENT SCF358 Manuel utilisateur

Philips

Philips SCF355 Manuel utilisateur

Philips

Philips SCF355 Manuel utilisateur

Philips

Philips AVENT SCF355/02 Manuel utilisateur

Philips

Philips AVENT scf356 Manuel utilisateur

Philips

Philips AVENT SCF358 Manuel utilisateur

Philips

Philips SCF250/00 Manuel utilisateur

Philips

Philips HD4331/01 Manuel utilisateur

Philips

Philips AVENT SCF358 Manuel utilisateur

Philips

Philips SCF250 Manuel utilisateur

Philips

Philips SCF355/03 Manuel utilisateur

Philips

Philips AVENT SCF358 Manuel utilisateur

Philips

Philips AVENT scf356 Manuel utilisateur

Philips

Philips AVENT SCF358 Manuel utilisateur

Philips

Philips AVENT scf356 Manuel utilisateur

Philips

Philips SCF355 Manuel utilisateur

Manuels Chauffe-biberon populaires d'autres marques

Topcom

Topcom KD-4302 Manuel utilisateur

SEVERIN

SEVERIN BK-3177 Manuel utilisateur

SEVERIN

SEVERIN BK 3176 Manuel utilisateur

Chicco

Chicco 06867 MU Manuel utilisateur

Reer

Reer Multimax 2 in 1 -travel Manuel utilisateur

Lionelo

Lionelo Thermup Go Manuel utilisateur

TEFAL

TEFAL Disney Baby TD1100K0 Manuel utilisateur

TrueLife

TrueLife INVIO BW Single Manuel utilisateur

Gourmia

Gourmia JBW-250 Manuel utilisateur

König Electronic

König Electronic HC-BW10 Manuel utilisateur

Gourmia

Gourmia JBW-150 Manuel utilisateur

NUK

NUK MEDICPRO 10.256.467 Manuel utilisateur

Petra

Petra DI 6.00 Manuel utilisateur

Philips AVENT

Philips AVENT Electric Bottle and Baby Food Warmer Manuel utilisateur

babymoov

babymoov Auto Speed Bib Manuel utilisateur

Alecto

Alecto BW600 Manuel utilisateur

Lionelo

Lionelo Thermup Manuel utilisateur

Vinotemp

Vinotemp VT-Chiller Manuel utilisateur