Philips Essence HR2084 Manuel utilisateur
Register your product and get support at
www.philips.com/welcome
HR2084
1
ENGLISH 6
DANSK 15
DEUTSCH 24
34
ESPAÑOL 45
SUOMI 55
FRANÇAIS 64
ITALIANO 73
NEDERLANDS 83
NORSK 93
PORTUGUÊS 102
SVENSKA 112
TÜRKÇE 121
138
147
6
Introduction
Congratulations on your purchase and welcome to Philips!
product at www.philips.com/welcome.
General description (Fig. 1)
AGraduated measuring cup
BLid
CBlander jar with level indication
DSealing ring
EBlade unit
FBlade unit interface
GMotor unit
HControl knob
IFilter
Important
Read this user manual carefully before you use the appliance and save it
for future reference.
General
Danger
-
it under the tap. Use only a moist cloth to clean the motor unit.
Warning
- Check if the voltage indicated on the appliance corresponds to the
local mains voltage before you connect the appliance.
-
order to avoid a hazard.
-
are damaged.
-
- Never use the blender jar to switch the appliance on and off.
- Never let the appliance run unattended.
- This appliance is not intended for use by persons (including children)
instruction concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
-
The blades are very sharp.
ENGLISH
Caution
-
adjustments to any of the parts.
-
enters the connection point of the blender jar on the motor unit.
- Never use any accessories or parts from other manufacturers or that
-
Blender
Warning
-
the appliance is running.
- Make sure the blade unit is securely fastened to the blender jar before
you assemble the blender jar onto the motor unit.
- Do not touch the cutting edges of the blender blade unit when you clean
-
ingredients that block the blades.
Caution
-
-
or ingredients that tend to foam.
-
unplug it.Then use a spatula to remove the food from the wall.
- Never forget to place the sealing ring on the blade unit before you
- Always make sure the lid is properly closed/assembled on the jar and
the measuring cup is inserted properly in the lid before you switch on
the appliance.
Filter
Caution
-
-
- Always make sure the lid is closed/assembled properly and the
measuring cup is inserted properly in the lid before you switch on
the appliance.
-
-
This Philips appliance complies with all standards regarding electromagnetic
available today.
ENGLISH 7
Built-in safety lock
This feature ensures that you can only switch on the appliance if you have
properly assembled the blender jar on the motor unit. If the blender jar is
,Thoroughly clean the parts that will come in contact with food
Using the appliance
Control knob
,If you want to use a speed between MIN and MAX, turn the control
knob to the desired position.
speed (MAX).
,If you want to use the Smoothie function, turn the control knob
from position OFF to the Smoothie position.
,If you want to use the Ice or Pulse function, just press the desired
quick-select button.
Smoothie function
Use this function to prepare delicious smoothies.When you turn the
Smoothies are thick drinks made of frozen or fresh fruit and fruit juices
and add more frozen or fresh fruit to make a thicker smoothie.
Ice button
The blender is equipped with a special Ice button for crushing ice.The
appliance starts crushing ice when you press the Ice button. As soon as you
ENGLISH8
Pulse button
As soon as you press the Pulse button the appliance starts running at the
immediately.The Pulse button can also be used while the appliance is
running at a speed between MIN and MAX.
Blender
,
With the blender you can prepare soups, sauces, milk shakes and
batters.You can also use the blender to process vegetables, fruit
and meat.
Preparing the blender for use
1 Place the sealing ring on the blade unit.
2 Assemble the blade unit onto the blade unit interface.
3 Screw the blade unit interface onto the bottom of the blender jar
4 Place the blender jar with the blade unit interface attached on
You can place the blender jar on the motor unit in two positions: with
the handle pointing to the right or to the left.
5 Put the plug in the wall socket.
Using the blender
1 Put the ingredients in the blender jar.
ENGLISH 9
2 Place the lid on the blender jar.
3 Insert the measuring cup into the opening in the lid.
4 Select a speed by turning the control knob or push one of the quick-
Do not let the appliance run for more than 3 minutes at a time. If you
let it cool down to room temperature before you let it run again.
5 Always switch off the appliance by setting the control knob to OFF
before you open the lid.
After using the blender
1 Unplug the appliance.
2 Remove the lid with the measuring cup from the blender jar.
3 Remove the blender jar with the unit interface attached from the
motor unit.
4 Unscrew the blade unit interface from the bottom of the blander jar.
5 Always clean the removable parts immediately after use.
Tips
- Cut meat or solid ingredients into smaller pieces before putting them
in the blender jar.
- Do not process a large quantity of solid ingredients at the same time.
Process these ingredients in a series of small batches instead.
-
through the opening in the lid onto the rotating blades.
Measuring cup
You can use the measuring cup to measure ingredients or to prepare
mayonnaise.
,To prepare mayonnaise, you can punch a hole in the middle of
the bottom of the measuring cup with a knife or another sharp
implement to use the measuring cup as a funnel for adding oil when
preparing mayonnaise.The oil should be added very slowly to obtain
the right consistency. Let the blender operate at a low speed when
preparing mayonnaise.
Note: Once you have punched a hole in the measuring cup, it cannot be used
as a measuring cup anymore.
ENGLISH10
Filter
in your drink.
1 Place the blender jar with the blade unit interface attached on
The blender can be placed on the motor unit in two positions.
2
the blender jar.
3 Make sure the appliance is plugged in.
1 Put the lid on the blender jar.
Make sure you place the lid on the blender jar in such a way that the drink
can be poured out through the strainer in the lid.
2
3
4 Insert the measuring cup into the hole in the lid.
5
Note: when you are processing a large quantity, we advise you not to put all
and let the appliance run for a few seconds.Then switch off the appliance
and add another small quantity, but do not exceed the top of the sieve mesh.
Repeat this procedure until you have processed all the ingredients.Always keep
the lid on the blender jar during processing.
1 Switch off the appliance and remove the blender jar from the motor
unit.
2 Pour out the drink via the pouring lip of the blender jar. Make sure
the lid is placed on the blender jar in such a way that the drink can
be poured out through the strainer in the lid.
3
Recipe
,Soy milk
ENGLISH 11
Autres manuels pour Essence HR2084
3
Table des matières
Langues :
Autres manuels Philips Mixer
Philips
Philips HR2020 Manuel utilisateur
Philips
Philips HR1350/70 Manuel utilisateur
Philips
Philips HR2062 Manuel utilisateur
Philips
Philips HR1628 Manuel utilisateur
Philips
Philips HR1378 Manuel utilisateur
Philips
Philips HR2170 Manuel utilisateur
Philips
Philips HR7627 Manuel utilisateur
Philips
Philips HR1365 Manuel utilisateur
Philips
Philips Robust Collection HR2181/00 Manuel utilisateur
Philips
Philips HR2071/20 Manuel utilisateur
Philips
Philips HR2800/50 Manuel utilisateur
Philips
Philips HD3860/00 Manuel utilisateur
Philips
Philips HR1374 Manuel utilisateur
Philips
Philips HR1610/00-01 Manuel utilisateur
Philips
Philips AVENT SCF883 Manuel utilisateur
Philips
Philips HR1365 Manuel utilisateur
Philips
Philips HR1459 Manuel utilisateur
Philips
Philips HR1845 Manuel utilisateur
Philips
Philips HR1316 Manuel utilisateur
Philips
Philips HR2895 Manuel utilisateur
