Philips Cucina HR1744 Manuel utilisateur

blender

fruit filter

HR1744

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions

should always be followed including the following:

Read all instructions before using.

1. To protect against electrical shock, do not immerse

cord, plug, blender unit, or motor unit in water or

other liquid.

2. Close supervision is necessary when any appliance is

used by or near children.

3. Unplug from outlet when not in use, before putting

on or taking off parts, and before cleaning.

4. Make sure the blender is in the OFF position (O)

before unplugging or plugging into any electrical outlet.

5. Avoid contacting moving parts.

6. Do not operate this appliance with a damaged cord

or plug, or after the appliance malfunctions, or has

been dropped or damaged in any manner. Return the

Blender to the retail location where it was purchased

for examination, repair, or adjustment.

7. Use this appliance only for its intended use as

described in this manual.The use of attachments,

including canning jars, is not recommended by Philips

Electronics North America Corporation, as they may

cause a risk of injury to persons.

8. Do not use outdoors or operate where oxygen is

being administered or in the presence of explosive

and/or flammable fumes.

9. Do not let cord hang over edge of table or counter,

or touch hot surfaces, including the stove.

10. This appliance is intended for household use ONLY; it

is not for commercial or industrial use.

11. Any service of the Blender should be performed by

the retail location where it was purchased.

12. To disconnect, press the "O" button to "0FF" position,

then remove plug from electrical outlet. Remove plug

by gripping the plug body and pulling it from the

outlet. Never yank or twist the cord to unplug.

13. Make sure the motor and the blades completely stop

turning before putting on or taking off parts.

14. Keep hands, hair, and clothing, as well as spatulas and

other utensils out of blender jar and away from sharp

blades while blending to prevent the possibility of

severe injury to persons and/or damage to the Blender.

If scraping, folding, etc., is necessary, Blender must be

turned off and unplugged, and only use a rubber spatula.

15. Blades are sharp. Handle carefully and with caution.

16. To reduce risk of injury to persons, never place

mixing blades on base without blender jar properly

attached.

17. Screw on blender jar bottom firmly. Injury can result if

moving blades become exposed.

18 Always operate Blender with lid in place and in

"closed" position.

19. Always hold blender jar while processing. If the jar

should turn when the motor is switched "ON", switch

Blender "OFF" by pressing "O" button immediately and

tighten blender jar in threaded container bottom.

20. Do not fill the blender jar with ingredients hotter than

140ºF/60ºC.

21. To avoid spillage, do not fill blender jar above the

maximum level indication (5 cups/1.25 liters),

particularly when blending liquids. Always insert

stopper into the lid before you begin processing.

22. Never let the appliance run unattended.

23. When blending hot liquids, remove the stopper from

the two-piece cover. DO NOT fill beyond 5 cups/1.25

liters level. Always begin processing at the lowest

speed setting. Keep hands and other exposed skin

away from the cover opening to prevent possible burns.

24. The blender jar is made of glass and therefore

breakable. Do not drop the glass container on a

floor or hard surface. Avoid extreme temperatures.

If the glass container is very cold, rinse it well with

lukewarm water before pouring in hot liquid.

25. If the glass jar cracks, discontinue use.

26. Always make sure that the rubber sealing ring is

in the correct position before you use the Blender.

27. The blender base is intended for use only with this

blender jar. Do not substitute any other blender jar.

28. This Blender has been equipped with an automatic

safety cut-out which cuts off the power supply in case

of an overload. In this case, the pin at the bottom of

the Blender will pop out. If you push the pin back into

the appliance, it will start again.

SAVE THESE

INSTRUCTIONS

SPECIAL INSTRUCTIONS

This Blender has a short cord to reduce the hazards of

becoming entangled in or tripping over a longer cord. An

extension cord may be used if the rating is equal to or

greater than the rating of the Blender. Use an extension

cord rated 13 amperes or greater. Care must be taken to

arrange extension cord so that it will not drape over

countertop or tabletop where it can be pulled on by

children or tripped over unintentionally.

Operating the Blender and another appliance at the same

time from the same electrical circuit could cause an

electrical overload condition, which would blow the fuse or

trip the circuit breaker.

SPECIAL POLARIZED PLUG

INSTRUCTIONS

This Philips Blender has a polarized plug for an

added safety feature (one blade is wider than the other).

To reduce the risk of electrical shock:

• Plug will fit into polarized outlet only one way.

• If plug does not properly fit outlet at first, reverse it.

• If plug still does not fit, contact a qualified electrician.

DO NOT ATTEMPT TO DEFEAT

THIS SAFETY FEATURE

Table of Contents

Features 2

Important 3

Before Use 4

Preparing the Blender for Use 4-5

Using Blender 5-6

Helpful Hints 6

Using the Fruit Filter 7-8

Helpful Tips Using the 8

Fruit Filter

Cleaning 8-9

For Assistance 9

Warranty Back Cover

Features

Pour In Opening

Stopper/Blender

Measuring Cup

Speed Buttons

3 = High Speed

2 = Normal Speed

1 = Low Speed

O = Off

Lid

Lid Strainer

Pouring Spout

Blender Jar

Level Indications

Cups/Ounces

Rubber Sealing

Ring

Mixing Blades

Blade Unit

Motor Unit

Fruit Filter

M= Momentary

(Pulse Position)

Quick Clean Button

Cord Storage

Rubber Safety

Suction Feet

Important:

•Read the instructions carefully and look at the illustrations before

you start using the appliance.

•Failure to properly insert filter may cause damage to

filter unit from cutting blades.

•Do not fill the blender jar with ingredients that are hotter than

140°F/60°C.

•To avoid spillage, do not fill the jar above the maximum level

indication (5 cups/1.25 liters), particularly when you are

blending liquids. Always insert the stopper into the lid before

you start processing.

•NEVER use your hand, fingers or any other object in the blender

jar while the appliance is turned on. If necessary, use a rubber

spatula to remove food from the wall of the blender jar after

you have turned the Blender off.

•Before you start using the Blender, be sure that the blender

jar is seated firmly or locked into position on motor base.

Do not place jar onto base while motor is running, or in the

“ON” position (see ‘Preparing the Blender for Use’).

•Always make sure that the lid is in “closed position” when

processing ingredients.

•The blender jar is made of glass and therefore breakable. Do not

drop the jar on a hard floor. Also avoid extreme thermal shocks.

If the blender jar is very cold, rinse it well with lukewarm water

before pouring in hot liquid.

•When blending solid ingredients, cut into 1-inch pieces first.

•Always pour liquids into blender jar before adding solid

ingredients.

•To add ingredients while you are already in the process of mixing,

remove the stopper from the lid and insert ingredients through

the hole.

•Never pour boiling liquid into the blender jar.

Fruit Filter

•Do not use the filter to process hot ingredients.

•Make sure that the filter has been properly inserted before you

switch the appliance on.

Before Use

Before using the Philips Blender for the first time, wash the stopper,

lid, fruit filter and blender jar in lukewarm soapy water to remove any

dust from packaging.

NOTE: Never clean accessories or parts in the dishwasher. The motor

unit can be cleaned with a moist cloth. Do not use abrasives, scourers,

alcohol, etc.

CYou can store excess power cord by winding it around the base

of the appliance.

Preparing the Blender for Use

The Blender has been equipped with a built-in safety lock that prevents

it from functioning if the blender jar has been assembled incorrectly or

has not been placed in base.

NOTE: Never turn the appliance ON or OFF (O) by removing or

engaging the glass jar!

C1Put the rubber sealing ring on the inner edge of the blade unit.

C2Mount the blender jar onto the blade unit and turn it in the

direction of the arrow until it is properly locked in place.

Always make sure that you screw the jar onto the blade

unit in such a way that the level indications on the blender

jar align with notches on the blade unit.

C3Mount the blender jar with blade unit onto the motor unit and

turn in the direction of the arrow until it is properly locked in

place.

C4After putting the ingredients in the blender jar, place the lid

onto the jar by pressing it down and turning it.

C5Insert the stopper into the opening in the lid. When finished,

make sure that the sieve of the lid is positioned in the spout

to pour liquids.

C6Always make sure that you remove the blender jar from

motor unit with the blade unit still attached to the jar. Never

touch the blades of the blade unit while the appliance is

connected to the power source.

To disassemble the blender, follow steps in reverse order.

Using the Blender

1Place the Philips Blender on a flat, dry, clean surface. Rubber

feet will grip typical countertops to prevent walking.

NOTE: Make sure that the appliance is plugged in and the

blender jar has been properly locked in place before you switch

the appliance on.

2Plug cord into 120V AC electrical outlet.

C3Select the speed that is most suitable for the ingredients you

want to process:

1light processing of mainly liquid ingredients, e.g.

chocolate milk

2heavier processing of a combination of liquid and

solid ingredients

3heavy processing of mainly solid ingredients

•If you are not sure which speed to select, you can always use the

highest speed (speed 3).

C4For quick processing needing only a few moments at a time,

press the Mbutton and then release it immediately.

You may also press the Mbutton to get a momentary power burst while

blender is operating on any of the other speeds. Once you release the M

button the blender automatically stops.

NOTE: Do not press the Mbutton for longer than a few

seconds at a time.

C5To switch the appliance off, when using speed 1, 2, or 3,

press the “O” button.

Helpful Hints

1The stopper may be used as a measuring cup by placing the

stopper upside down in the lid.

C2The opening in the lid can be used for adding ingredients while

the motor is running.

3Do not let the appliance run for longer than 3 minutes at a

time. If you have not finished processing after 3 minutes, switch

the appliance off (O) for one minute before you let it run again.

C4Pre-cut meat and other solid ingredients into smaller pieces

before putting them into the blender jar.

5For optimal blending of solid ingredients, feed a series of small

amounts into the jar rather than processing a large quantity at

once.

6If the ingredients are still too large or chunky, switch the

Blender to off (O) position and then let it run briefly a couple

of times by pressing the M(momentary/pulse) button, or turn

the appliance off (O), wait until blades stop turning and stir the

ingredients with a rubber spatula or reduce the contents of

the blender jar and process smaller amounts at a time.

7To crush ice cubes drop them onto the blades through the

opening in the lid while the motor is running. Remove the

crushed ice when the blender jar is 1/2 full.You may find that

using the M(momentary/pulse) button works best.

NOTE: Hold lid in place with one hand while processing ice cubes.

8If you are processing solid and liquid ingredients at the same

time, first put the liquid ingredients in the blender jar. Add the

solid ingredients while the Blender is running.

Autres manuels pour Cucina HR1744

Table des matières

Autres manuels Philips Mixer

Philips

Philips HR2505 Manuel utilisateur

Philips

Philips Cucina HR1799 Manuel utilisateur

Philips

Philips HR1365 Manuel utilisateur

Philips

Philips HR3551 Manuel utilisateur

Philips

Philips Viva HR2203 Manuel utilisateur

Philips

Philips Robust Collection HR2181/00 Manuel utilisateur

Philips

Philips HR1365 Manuel utilisateur

Philips

Philips HR3551 Manuel utilisateur

Philips

Philips HR2027 Manuel utilisateur

Philips

Philips Cucina HR1799 Manuel utilisateur

Philips

Philips HR1617 Manuel utilisateur

Philips

Philips HR2027 Manuel utilisateur

Philips

Philips HR1845 Manuel utilisateur

Philips

Philips HR7761 Manuel utilisateur

Philips

Philips HR1374 Manuel utilisateur

Philips

Philips HR2181/10 Manuel utilisateur

Philips

Philips HR1358/54 Manuel utilisateur

Philips

Philips HR2090 Manuel utilisateur

Philips

Philips HR1602 Manuel utilisateur

Philips

Philips HR1367/02 Manuel utilisateur

Philips

Philips HR1721 Manuel utilisateur

Philips

Philips HR2223 Manuel utilisateur

Philips

Philips HR1608/00 Manuel utilisateur

Philips

Philips HR2051 Manuel utilisateur

Manuels Mixer populaires d'autres marques

ROTOR

ROTOR 1125.201 Manuel utilisateur

Braun

Braun Multiquick 5 Vario series Manuel utilisateur

ARENDO

ARENDO MIRA 305424 Manuel utilisateur

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuel utilisateur

Viconte

Viconte VC-4406 Manuel utilisateur

Oster

Oster BLSTAB-CB0 Manuel utilisateur

HOFFEN

HOFFEN MC-3005 Manuel utilisateur

Black & Decker

Black & Decker BLC18750DM Manuel utilisateur

Sunbeam

Sunbeam 4182 Manuel utilisateur

Bialetti

Bialetti FMX35 Manuel utilisateur

Black & Decker

Black & Decker BL8000 Manuel utilisateur

Duronic

Duronic BL530 Manuel utilisateur

Exquisit

Exquisit MS 3002 wes Manuel utilisateur

Lumme

Lumme LU-KP1891A Manuel utilisateur

Binatone

Binatone HB-735 Manuel utilisateur

Moulinex

Moulinex LM936E10 Manuel utilisateur

Oster

Oster VERSA Manuel d'installation et d'exploitation

Ninja

Ninja NN210Q Manuel utilisateur