Philips AVENT SCD501 Manuel utilisateur

SCD501

EN User manual 3

BG Ръководствозапотребителя 12

CS Příručkaprouživatele 22

ET Kasutusjuhend 31

HR Korisničkipriručnik 40

HU Felhasználóikézikönyv 49

KK Қолданушының нұсқасы 58

LT Vartotojovadovas 68

LV Lietotājarokasgrāmata 78

PL Instrukcjaobsługi 87

RO Manualdeutilizare 96

Руководствопользователя

105

SK Príručkaužívateľa 115

SL Uporabniškipriročnik

124

SR Korisničkipriručnik 133

UK Посібниккористувача 142

ENGLISH

2.0.2 Warning

•Check if the voltage indicated on

the adapters of the baby unit and

parent unit corresponds to the

local mains voltage before you

connect the appliance.

•Only use Philips recommended

adapter (model S003PV0600050).

•Do not modify and/or cut and/

or change any part of the adapter,

this causes a hazardous situation.

•Do not use the baby monitor if

the adapter of the baby or parent

unit is damaged. Contact the

Philips Consumer Care Centre.

•Do not unscrew the back panel

of the baby unit to prevent an

electric shock.

•This appliance is not intended for

use by persons (including children)

with reduced physical, sensory

or mental capabilities, or lack of

experience and knowledge, unless

they have been given supervision

or instruction concerning use

of the appliance by a person

responsible for their safety.

Children shall not play with the

appliance.

1 Introduction

Congratulations on your purchase and welcome

to Philips AVENT! To benet fully from the

support that Philips AVENT offers, register your

product at www.philips.com/welcome. Read this

user manual carefully.

2 Important

2.0.1 Danger

•Never immerse any part of the

baby monitor in water or any

other liquid. Do not place where

water or any other liquid can drip

or splash onto it. Do not use in

moist places or close to water.

•Never put anything on top of the

baby monitor or cover it. Do not

block any ventilation openings.

•Cords present a potential

strangulation hazard. Keep cords

out of the reach of children (more

than 1 metre/3.5 feet away).

Never place the baby unit inside

the baby’s bed or playpen.

2.0.4 Important information

about batteries

•Always place batteries of the

correct type in the parent unit to

avoid the risk of explosion.

•The parent unit does not have

a charging function. If you use

rechargeable batteries in the

parent unit, recharge them in a

battery charger.

•Make sure that your hands are

dry when you insert or replace

batteries.

•To avoid battery leakage, damage

or explosion:

1 Do not expose the appliance

to temperatures higher than

40°C. Batteries may explode

if exposed to sunshine, re or

high temperatures.

2 Do not overcharge, short-

circuit, reverse charge or

damage batteries.

3 Remove the batteries of the

parent unit if you are not going

to use the appliance for one

month or more.

4 Do not leave empty batteries

in the parent unit.

•Dispose of non-

rechargeable batteries

and rechargeable batteries

properly (see chapter

‘Environment’).

•To protect your skin, wear

protective gloves when you handle

damaged or leaking batteries.

•To have a cordless operating time

of up to 24 hours, insert batteries

with a capacity of 1500 mAh or

more in the parent unit.

2.0.3 Caution

•This baby monitor is intended

as an aid. Do not use it as a

substitute for responsible and

proper adult supervision.

•Use the appliance at a

temperature between 0°C

(32°F) and 40°C (104°F). Store

the appliance at a temperature

between -25°C (-13°F) and 70°C

(158°F).

•Do not expose the baby unit and

parent unit to extreme cold or

heat or to direct sunlight. Do not

put the baby unit and the parent

unit close to a heating source.

•Never cover the parent unit and

the baby unit with anything (e.g. a

towel or blanket).

•Always place batteries of the

correct type in the parent unit

(see ‘Inserting the batteries’ in

chapter ‘Preparing for use’).

•If you place the parent unit or the

baby unit next to a transmitter

or other DECT appliance (e.g.

a DECT telephone or wireless

router for the internet), the

connection may be lost. Move the

baby unit or parent unit further

away from the other wireless

appliances until the connection is

restored.

•Switched-on mobile phones in the

vicinity of the baby monitor may

cause interference with the baby

monitor.

3 Product overview

A Parentunit

1 Sound level lights

2 On/off button 3

3 Volume - button

4 ’link’ light

5 Socket for small plug of adapter

6 Battery light

7 Volume + button

8 Release button of battery compartment

lid

9 Battery compartment lid

10 Adapter

B Babyunit

1 Nightlight button

2 On/off button 3

3 Power-on light

4 Fixed mains cord

5 Adapter

2.0.5 Compliance with

standards

•This appliance complies with

all applicable standards and

regulations regarding exposure to

electromagnetic elds.

•This appliance complies with the

radio interference requirements of

the European Community.

•Philips Consumer Lifestyle,

Tussendiepen 4, Drachten,

Netherlands, hereby declares that

this baby monitor is in compliance

with the essential requirements

and other relevant provisions of

Directive 1999/5/EC.A copy of

the EC Declaration of Conformity

(DoC) is available online at

www.philips.com/support.

ENGLISH

4.2.2 Inserting the batteries

If the parent unit is not close to a wall socket,

you can run it on two 1.5V R6 AA alkaline

non-rechargeable batteries or two 1.2V R6

AA rechargeable batteries (not supplied).The

operating time on full batteries is up to 24 hours,

depending on the type of batteries used and on

how long and how often you use the parent unit

on batteries.

DNote:

Please note that the parent unit does not charge the

batteries when it is connected to the mains.You can

use rechargeable batteries in the parent unit, but you

need to charge them in a separate charger.

BWarning:

Unplugtheparentunitandmakesureyour

handsandtheunitaredrywhenyouinsertthe

batteries.

Press the release button (1) to unlock the

battery compartment lid and remove the lid (2).

2 Insert the non-rechargeable batteries or fully

charged rechargeable batteries.

DNote:

Make sure the + and - poles of the batteries

point in the right direction.

4 Preparing for use

4.1 Baby unit

The baby unit is mains-operated and has a xed

mains cord.

1 Put the adapter of the mains cord in a wall

socket to connect the baby unit to the mains.

4.2 Parent unit

The parent unit runs on mains power.You can also

insert batteries to allow mobile use of the parent

unit.

4.2.1 Mains operation

1 Put the small plug in the socket in the side

panel of the parent unit and put the adapter

in a wall socket.

•To prevent a high-pitched sound from one

or both units, make sure the parent unit is

at least 1.5 metres/4.9 feet away from the

baby unit.

5.2 Linking parent unit and

baby unit

1 Press and hold the 3button on the baby unit

for 3 seconds until the power-on light lights up.

2 Press and hold the 3button on the parent

unit for 3 seconds until the ‘link’ light starts

ashing red.

3 To reattach the battery compartment lid, rst

insert the lugs into the bottom rim of the

battery compartment.Then push the lid home

until it locks into place with a click.

5 Using the baby

monitor

5.1 Positioning the baby

monitor

BWarning:

Keepthebabyunitoutofthereachofthebaby.

Neverplacethebabyunitinsidethebaby’sbed

orplaypen.

•Because the cord of the baby unit presents

a potential strangulation hazard, make sure

that the baby unit and its cord are at least 1

metre/3.5 feet away from your baby.

ENGLISH

Dry materials Material

thickness

Loss of

range

Wood, plaster, cardboard,

glass (without metal,

wires or lead)

< 30cm

(12in)

0-10%

Brick, plywood < 30cm

(12in)

5-35%

Reinforced concrete < 30cm

(12in)

30-100%

Metal grilles or bars < 1cm

(0.4in)

90-100%

Metal or aluminium

sheets

< 1cm

(0.4in)

100%

6 Features

6.1 Smart Eco mode

This baby monitor has Smart Eco modes as a

standard feature.This mode is always active and

automatically reduces the DECT signal from the

baby unit to the parent unit to save energy and

reduce radio transmission.

6.2 Baby unit

6.2.1 Nightlight

The nightlight produces a soft glow that comforts

your baby.

1 Press the nightlight button on top of the baby

unit to switch the nightlight on or off.

•When the parent unit and baby unit are

linked, the ‘link’ light turns solid green.

•If no connection is established, the ‘link’ light

continues to ash red and the parent unit

beeps.

What to do if no link is established

•If the parent unit is out of range, place

it closer to the baby unit.

•If the baby unit or parent unit is too

close to another DECT appliance

(e.g. a cordless phone), switch off this

appliance or move the unit away from

this appliance.

•If the baby unit is switched off,

switch it on.

5.2.1 Operating range

•The operating range is up to

300 metres/985 feet outdoors and

up to 50 metres/150 feet indoors.

•The operating range of the baby monitor

varies depending on the surroundings and

factors that cause signal attenuation.Wet

and moist materials cause so much signal

attenuation that the range loss is up to 100%.

For signal attenuation from dry materials, see

table below.

2 Press the - button to decrease the volume.

If you hold down the - button for 2 seconds,

you set the volume to mute.

DNote:

If the volume is set to mute, the sound level

lights show that the baby makes sounds.The

louder the sound made by the baby, the more

sound level lights light up.

7 Cleaning and

maintenance

•Do not use cleaning spray or liquid cleaners.

•Unplug the parent unit and baby unit before

cleaning.

•Clean the parent unit, the baby unit and the

adapters with a dry cloth.

8 Storage

•Remove the batteries from the parent unit if

you do not use it for more than a month.

•Store the parent unit, its adapter and the baby

unit in a cool and dry place.

6.3 Parent unit

6.3.1 Battery light

1 The battery light is off when the parent unit

is connected to the mains or the batteries

contain enough energy.

2 When the batteries are low, the battery light

ashes red and the parent unit beeps.

3 Replace the batteries when they are low (see

‘Inserting the batteries’ in chapter ‘Preparing

for use’).

6.3.2 Setting the volume

1 Press the + button to increase the volume.

•You hear a beep each time you press the

button to increase or decrease the volume

by one level.

•The sound level lights light up briey to

show the current volume.

ENGLISH

•This crossed-out wheeled bin means that

the appliance contains disposable batteries

that cannot be disposed of with normal

household waste. Dispose of batteries at an

ofcial collection point for batteries. Correct

disposal of batteries helps to preserve the

environment.

12 Frequently asked

questions

Whydon’tthepower-onlightofthebabyunit

andthe‘link’lightoftheparentunitcomeon

whenIpresstheon/offbuttonsoftheunits?

•Perhaps one or both units are not plugged in

properly. Connect the units to the mains and

press the on/off buttons on both units for 3

seconds to establish connection between the

parent unit and the baby unit.

•If you use the parent unit on batteries, the

batteries of the parent unit are empty or there

are no batteries in the battery compartment.

Whydoesthe‘link’lightontheparentunitash

redcontinuously?

•The baby unit and the parent unit are out

of range of each other. Move the parent unit

closer to the baby unit.

•The baby unit may be switched off. Switch on

the baby unit.

9 Ordering accessories

To buy accessories or spare parts, visit

www.shop.philips.com/service or go to your

Philips dealer.You can also contact the Philips

Consumer Care Centre in your country (see the

worldwide guarantee leaet for contact details).

10 Guarantee and

support

If you need information or support, please visit the

Philips website at www.philips.com/support

or read the separate worldwide guarantee leaet.

11 Environment

•This symbol means that you must not

throw away the appliance with the normal

household waste. Dispose of the appliance

at an ofcial collection point for electrical

appliances. Correct disposal helps to preserve

the environment.

Autres manuels pour AVENT SCD501

Table des matières

Langues :

Autres manuels Philips Babyphone

Philips

Philips Avent DECT baby SCD498 Manuel utilisateur

Philips

Philips SBC SC 362 Manuel utilisateur

Philips

Philips AVENT SCD860 Manuel utilisateur

Philips

Philips Avent SCD921 Manuel utilisateur

Philips

Philips AVENT SCD506/52 Manuel utilisateur

Philips

Philips SBC SC467 Manuel utilisateur

Philips

Philips SBCSC763 Manuel utilisateur

Philips

Philips SBC SC468 Manuel utilisateur

Philips

Philips Avent SCD730 Manuel utilisateur

Philips

Philips AVENT SCD845 Manuel utilisateur

Philips

Philips SCD530 - Avent DECT Baby Monitor Monitoring... Manuel utilisateur

Philips

Philips SCD610 Manuel utilisateur

Philips

Philips SBC SC362 Manuel utilisateur

Philips

Philips Avent SCD730 Manuel utilisateur

Philips

Philips Avent SCD480 Manuel utilisateur

Philips

Philips Babysitter SBC SC 363 Manuel utilisateur

Philips

Philips AVENT SCD501 Manuel utilisateur

Philips

Philips Baby Monitor SBCSC363 Manuel utilisateur

Philips

Philips SBC SC466/00 Manuel utilisateur

Philips

Philips AVENT SCD585 Manuel utilisateur

Philips

Philips AVENT SCD630 Manuel utilisateur

Philips

Philips AVENT SCD486H1 Manuel utilisateur

Philips

Philips SCD589 Manuel utilisateur

Philips

Philips SBC SC361 Manuel utilisateur

Manuels Babyphone populaires d'autres marques

Motorola

Motorola MBP15 Manuel utilisateur

Oricom

Oricom Babysense 7 Manuel utilisateur

Levana

Levana TW502 Manuel utilisateur

Luvion

Luvion Essential Manuel utilisateur

NUK

NUK Eco Control Video Display 550VD Manuel utilisateur

Lorex

Lorex sweet peek mini Manuel utilisateur

Mondevices

Mondevices MonBaby 2 Manuel utilisateur

Famidoc

Famidoc FDBB-V2 Manuel utilisateur

Graco

Graco iMonitor 2797 Manuel utilisateur

babymoov

babymoov High Care A014001 Manuel utilisateur

Ramili

Ramili RV1000 Manuel utilisateur

Swann

Swann SW231-FLO Manuel utilisateur

Badabulle

Badabulle Baby Online 300 m+ Manuel utilisateur

Philips AVENT

Philips AVENT SCD526/00 Manuel utilisateur

Uniden

Uniden Guardian UBR223 Manuel utilisateur

Summer

Summer Day & Night 28470A Manuel utilisateur

Ivation

Ivation Wireless Monitoring System Manuel utilisateur

Levana

Levana Lila Manuel utilisateur