Philips AC4372 Manuel utilisateur

AC4372

AC4374

User manual

Always there to help you

www.philips.com/welcome

Question?

Contact

Philips

2EN

Contents

1 Important 3

Safety 3

2 Yourairpurier 5

Overview (for AC4372) 5

Overview (for AC4374) 6

3 Get started 7

Install lters 7

4 Usetheairpurier 9

Understand the air quality light 9

Switch on 9

Set the sensitivity of the air quality

sensor 10

Select the fan speed 11

Set the timer 11

Activate child lock 11

Night mode 12

5 Cleanyourairpurier 12

Clean the air purier 12

Clean the air quality sensor 12

6 Cleanthepre-lter 13

7 Replacethelters 15

Reset lter lock 17

8 Troubleshooting 18

9 Guarantee and service 19

Order parts or accessories 19

10 Notices 20

Electromagnetic elds (EMF) 20

Recycling 20

3EN

1 Important

Safety

Read this user manual carefully before you use

the appliance, and save it for future reference.

Danger

•Do not let water or any other

liquid or ammable detergent

enter the appliance to avoid

electric shock and/or a re

hazard.

•Do not clean the appliance

with water, any other liquid,

or a (ammable) detergent to

avoid electric shock and/or a re

hazard.

Warning

•Check if the voltage indicated

on the bottom or indicated

at the rear of the appliance

corresponds to the local power

voltage before you connect the

appliance.

•If the power cord is damaged,

you must have it replaced

by Philips, a service center

authorized by Philips, or similarly

qualied persons in order to

avoid a hazard.

•Do not use the appliance if the

plug, the power cord, or the

appliance itself is damaged.

•This appliance is not intended

for use by persons (including

children) with reduced physical

sensory or mental capabilities,

or lack of experience and

knowledge, unless they have

been given supervision or

instruction concerning use

of the appliance by a person

responsible for their safety.

•Children should be supervised

to ensure that they do not play

with the appliance.

•Do not block the air inlet and

outlet, e.g. by placing items on

the air outlet or in front of the

air inlet.

Caution

•This appliance is not a substitute

for proper ventilation, regular

vacuum cleaning, or use of an

extractor hood or fan while

cooking.

•If the power socket used to

power the appliance has poor

connections, the plug of the

appliance becomes hot. Make

sure that you plug the appliance

into a properly connected

power socket.

4EN

•Always place and use the

appliance on a dry, stable, level,

and horizontal surface.

•Leave at least 20cm free space

behind and on both sides of

the appliance and leave at least

30cm free space above the

appliance.

•Do not place anything on top of

the appliance and do not sit on

the appliance.

•Do not place the appliance

directly below an air conditioner

to prevent condensation from

dripping onto the appliance.

•Make sure all lters are properly

installed before you switch on

the appliance.

•Only use the original Philips

lters specially intended for this

appliance. Do not use any other

lters.

•Avoid knocking against the

appliance (the air inlet and outlet

in particular) with hard objects.

•Do not insert your ngers or

objects into the air outlet.

•Do not use this appliance when

you have used indoor smoke-

type insect repellents or in

places with oily residues, burning

incense, or chemical fumes.

•Do not use the appliance near

gas appliances, heating devices

or replaces.

•Always unplug the appliance

after use and before you clean it.

•Do not use the appliance in a

room with major temperature

changes, as this may cause

condensation inside the

appliance.

•To prevent interference, place

the appliance at least 2m away

from electrical appliances that

use airborne radio waves such as

TVs, radios, and radio-controlled

clocks.

•The appliance is only intended

for household use under normal

operating conditions.

•Do not use the appliance in wet

surroundings or in surroundings

with high ambient temperatures,

such as the bathroom, toilet, or

kitchen.

•The appliance does not remove

carbon monoxide (CO) or

radon (Rn). It cannot be used a a

safety device in case of accidents

with combustion processes and

hazardous chemicals.

2 Your air purifier

Congratulations on your purchase, and welcome to Philips!

To fully benet from the support that Philips offers, register your product at www.Philips.com/welcome.

Philips VitaShield IPS technology and NanoCloud technology ensures you “Healthy air always”.

VitaShield IPS technology effectively removes pollutants (ultrane particles, allergens, bacteria and

viruses) with size >0.02 micron including bacteria and virus*.

*According to 2008 Microbiological Risk Assessment Report of the World Health Organization

(WHO), the avian inuenza, human inuenza viruses, Legionella, Hepatitus viruses and SARS

coronavirus are larger than 0.02 micron.

Read this user manual carefully before you install and use the unit. Save it for future reference.

Overview (for AC4372)

Touchscreen control panel

Light sensor

Air quality light

Air quality sensor

Filter 4: HEPA lter AC4154

Filter 3: Activated carbon lter AC4153

Filter 2: Multi-care lter AC4151

Filter 1: Pre-lter

Front panel

e f g h i

6EN

Overview (for AC4374)

Touchscreen control panel

Light sensor

Air quality light

Air quality sensor

Filter 2: Integrated Multi-care lter AC4138

Filter 1: Pre-lter

Front panel

e f g

7EN

3 Get started

Installlters

The appliance comes with all lters tted

inside, but you have to remove the packaging

of the lters before you can use the appliance.

Remove all lters, unpack them, and place them

back into the appliance as described below.

Note

•Insert the lters in the correct position.

1 Place your ngers in the recesses of the

side panels and gently pull the top part of

the front panel towards you.

2 Lift the hooks at the bottom of the panel

out of the bottom of the appliance.

3 To remove the pre-lter, grab the two

projections and pull the lter towards you.

4 Remove all the lters from the appliance.

5 Remove all packaging material from the

lters.

6 For AC4372, put the HEPA lter, activated

carbon lter and multi-care lter back into

the purier.

8EN

For AC4374, put the integrated Multi-care lter

back into the purier.

Note

•Make sure that the side with the tag is pointing towards

you.

7 Place the pre-ler in the appliance.

Note

•Make sure that the side with the two projections is

pointing towards you, and that all hooks are properly

attached to the appliance.

8 To reattach the front panel, insert the

bottom hooks into the bottom of the

appliance rst (1). Then, push the panel

against the body of the appliance (2).

9EN

4 Use the air

purifier

Understand the air quality

light

Color of the air quality

light

Air quality level

Blue Very good

Dark purple good

Purple fair

Red bad

The air quality light automatically goes on when

the purier is switched on.

Note

•The built-in air quality sensor measures the air quality

and automatically selects the appropriate color of

the air quality light. When the air is clean, the color

of the air quality light is in blue. When the air quality

deteriorates, the color of the air quality light changes

from dark purple to red.

Switch on

1 Plug the air purier into the power socket.

» All lights go on from left to right in

cycle, and you hear a beep.Then, the

lights go out again.

» The air quality light shows its 4 colors .

2 Press the button to switch on the

purier.

» The fan speed indicators

(AUTO) and goes on.

Note

•When the purier is switched on, the air quality sensor

will take some time to measure the air quality in the room.

The air quality light changes its color and eventually stays in

the correct color in accordance with the air quality..

3 Press and hold the button for 2

seconds to switch off the purier.

2”

Tip

•The purier has a memory mode. It will recall the

previous settings of your last use.

•If you disconnect the purier from the power supply

after switching off, it will enter the default mode for

next use.The fan speed is (AUTO).

10EN

Set the sensitivity of the air

quality sensor

To meet different needs when you use the

appliance, we are offering you the opportunity

to adjust the sensitivity of the air quality sensor.

There are 3 sensitivity levels:

• standard

• sensitive

• extra sensitive

The pollution sensor is set to extra sensitive.

You can adjust the sensitivity of the air quality

sensor in the following way.

Note

•When it is set to a higher sensitivity, the purier

becomes more allergic to the pollutants in the air.

When the purier is in (AUTO) mode, it is

more likely to choose a higher fan speed than the

standard mode.The air quality sensor selects the

appropriate color of the air quality light in accordance

with the higher sensitivity.

1 Unplug the air purier from the power

socket.

2 Wait for a while before plugging it back

into the power socket.

3 Press the and buttons simultaneously.

» The purier beeps twice and one of

the fan speed indicators ( , or )

ashes to show the current sensitivity

level of the air quality sensor.

Fan speed

indicator

Sensitivity level

extra sensitive (default

sensitivity)

sensitive

standard

4 Press the button to adjust the sensitivity

level of the air quality sensor.

» One of the indicators ( , , or

) goes on to show the preferred

sensitivity level of the air quality sensor.

5 Press and hold the button for 3 seconds

to switch off the purier, and the sensitivity

setting is saved.

Note

•When setting the sensitivity, if no button is pressed in

10 seconds, the purier will skip the sensitivity setting

mode, and maintain the previous setting.

Autres manuels pour AC4372

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Philips Purificateur d'air

Philips

Philips 800i Series Manuel utilisateur

Philips

Philips AC3033/86 Manuel utilisateur

Philips

Philips AC4084 Manuel utilisateur

Philips

Philips AC4550 Manuel utilisateur

Philips

Philips AC4236 Manuel utilisateur

Philips

Philips AC4074 Manuel utilisateur

Philips

Philips AC2889/90 Manuel utilisateur

Philips

Philips AC3259/80 Manuel utilisateur

Philips

Philips AC4002 Manuel utilisateur

Philips

Philips HR4332/00 Manuel utilisateur

Philips

Philips AC4556 Manuel utilisateur

Philips

Philips AC3036 Manuel utilisateur

Philips

Philips AC4030/00 Manuel utilisateur

Philips

Philips 3000i Series Manuel utilisateur

Philips

Philips AC3259 Manuel utilisateur

Philips

Philips AC1214 Manuel utilisateur

Philips

Philips HR4320/00 Manuel utilisateur

Philips

Philips AC4236 Manuel utilisateur

Philips

Philips AC4080/10 Manuel utilisateur

Philips

Philips aetaire Polo Dent Manuel utilisateur

Philips

Philips AC4083 Manuel utilisateur

Philips

Philips UVCA110 Manuel technique

Philips

Philips AC4025 Manuel utilisateur

Philips

Philips AC2889 Manuel utilisateur

Manuels Purificateur d'air populaires d'autres marques

IKEA

IKEA UPPÅTVIND Manuel utilisateur

Nash

Nash AP-1 PureSmart Manuel utilisateur

LG PH-U450 Series Manuel utilisateur

DeLonghi

DeLonghi DDSX 220WFA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MA-E85R-E Manuel utilisateur

Sharp

Sharp FU-40SE Manuel utilisateur

Hitachi

Hitachi EP-A3000 Manuel utilisateur

TruSens

TruSens Z-2000 Manuel utilisateur

Motorola

Motorola MBP87SN Manuel utilisateur

Beko

Beko ATP 7100I Manuel utilisateur

Carrier

Carrier INFINITY 1620 Manuel utilisateur

AtmosAir

AtmosAir P2002 Manuel utilisateur

Winix

Winix NK300 Manuel utilisateur

Friedrich

Friedrich C-90A Instructions d'utilisation et d'installation

Surgically Clean Air

Surgically Clean Air JADE2.0 Manuel utilisateur

Base aire

Base aire 555 Pro Manuel utilisateur

Champion

Champion CP25 Manuel utilisateur

vollara

vollara Air & Surface Pro+ Manuel utilisateur