PERFECTPRO Rock Hart BT Manuel utilisateur
Operating instruction
Mode d’emploi
Gebruiksaanwijzing
Bedienungsanleitung
GB
NL
D
F
3A81YR6L00000
1
GB
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider
than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fit
into your outlet. Consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
2
11.
12.
13.
14.
15.
16.
17.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or table specied
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused
for long periods of time.
Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged. liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
To Reduce the Risk of Fire or Electric Shock, Do not Expose
This Appliance To Rain or Moisture.
The Shock Hazard Marking and Associated Graphical Symbol
is provided on the rear of unit.
Apparatus shall not be exposed to dripping or splashing and no
objects lled with liquids, shall be placed on the apparatus.
3
GB
18.
19.
20.
21.
22.
Excessive sound pressure on ear-and headphones could
impair the hearing ability. Higher setting that idle on the
equalizer leads to higher signal voltages on the output for ear
and headphones.
The power plug should be close to the radio, and easy to be
approached that during the emergency, to disconnect the power
from the radio, just unplug the power plug from the AC power
slot.
Where the MAINS plug or an appliance coupler is used as the
disconnect device, the disconnected device shall remain readily
operable.
The batteries shall not be exposed to excessive heat such as
sunshine, re or the like.
This apparatus is provided with protection against splashing
water (IPX4).
CAUTION: To reduce the risk of the electric shock, do not
perform any servicing other than that contained in the operating
instructions unless you are qualied to so.
WARNING! Warranty becomes void once the radio cabinet has
been opened or any modifications or alterations to the radio
have been made!
4
5
GB
Control
Charge LEDs
Bluetooth status indicator
Standby button
Source button
EQ (equalizer) button
Info/Menu button
Volume control/Loudness
LCD display
Tuning control/Select/Stereo-Mono control
Auto tune button/Bluetooth pairing button
Preset 1 button
Preset 2 button
Preset 3 button
Aux in 1 socket
Preset 6 button/Play/Pause button
Preset 5/Fast forward button
Preset 4/Rewind button
Speakers
Multimedia compartment xture
Aux in 2 socket
USB charging socket
AC outlet
FM rubber antenna
DC IN socket
Power cord
Socket for software upgrade
NiMH/Alkaline batteries switch
Battery compartment
Display protection bar
NFC detection tag
15
13
12
14
2
5
11
7
9
10
3
4
1
8
6
30
28
27
29
17
20
26
22
24
25
18
19
16
23
21
6
Display
RDS indicator
Battery power
EQ indicator
Loudness On
Stereo indicator
Two Line text display
B
E
C
D
A
F
7
GB
Power the radio
A. Battery Operation
Turn the battery cover fixtures anti-clockwise to loosen and pull
down the battery cover. Insert 8 x D size (UM-1) battery into the
compartment. Ensure the battery is inserted in accordance with the
diagram shown. Close the battery cover and fasten the xture by
turning clockwise. If the radio is not to be used for any extended
period of time, it is recommended that the battery is removed from
the radio.
8
● Battery operation using alkaline batteries
1. Before you insert the batteries, if you use non-rechargeable
batteries, make sure the NiMH/Alkaline switch which located
inside the battery compartment is switched to Alkaline position. If
you use rechargeable batteries, make sure to switch NiMH/Alkaline
switch to NiMH position.
2. Reduced power, distortion and a “stuttering sound” are all signs
that the batteries need replacing.
● Battery operation using rechargeable batteries
1. Slide the battery switch to the NiHM position.
2. Insert 8 UM-1 batteries into spaces in the compartment. Make
sure all batteries are inserted with the correct polarity as shown on
the rear cabinet. The radio is also designed to be used with NiMH
rechargeable batteries.
Note:
Do not use a mix of old and new rechargeable batteries.
Do not use a mix of full and empty rechargeable batteries.
Do not use batteries that have a different mAh capacity
Do not use damaged or leaking batteries
9
GB
3. Make sure the radio is switched off and connect the AC power
cord into the AC socket.
When the charge indicator A and B light red indicating batteries are
charging. Batteries will be fully charged in around 9 hours. Both
the battery indicator A and B show steady green when the battery
charging is complete.
Note:
Duration for charging your battery fully can be varied according to
the mAh capacity of a battery. Higher mAh batteries required longer
charging time.
IMPORTANT:
Under some conditions the charging LED indicator may switch off
after ashing briey. This may happen if the batteries are already
freshly charged, or if the radio detects that you may be attempting
to recharge alkaline batteries or mixed different types of capacity of
rechargeable battery. In these cases the charging will be stopped.
2. AC operation
Before you plug the AC cord into the AC socket, be sure the voltage
is correct. If you have batteries in the radio and use the AC power
cord, the batteries will automatically be disconnected.
AC cable hook is designed to store the cord when the radio is not
in use.
Table des matières
Langues :
Autres manuels PERFECTPRO Radio
PERFECTPRO
PERFECTPRO SLIM-3 Manuel utilisateur
PERFECTPRO
PERFECTPRO Rock Pro Manuel utilisateur
PERFECTPRO
PERFECTPRO ROCKMATE Manuel utilisateur
PERFECTPRO
PERFECTPRO RH4-18V Manuel utilisateur
PERFECTPRO
PERFECTPRO SLIM-2 Manuel utilisateur
PERFECTPRO
PERFECTPRO Rock Bull Manuel utilisateur
PERFECTPRO
PERFECTPRO Rock Hart Manuel utilisateur
PERFECTPRO
PERFECTPRO Rock Solid Manuel utilisateur
PERFECTPRO
PERFECTPRO Workman 2 Manuel utilisateur
PERFECTPRO
PERFECTPRO Blue Bull Manuel utilisateur
PERFECTPRO
PERFECTPRO MyTUBE Manuel utilisateur
PERFECTPRO
PERFECTPRO WORK-STATION Manuel utilisateur
PERFECTPRO
PERFECTPRO Solid Digital Manuel utilisateur
PERFECTPRO
PERFECTPRO Workman Manuel utilisateur
PERFECTPRO
PERFECTPRO Handsfree Manuel d'instructions
PERFECTPRO
PERFECTPRO Digitube Manuel d'instructions
PERFECTPRO
PERFECTPRO Workman Manuel utilisateur
PERFECTPRO
PERFECTPRO WORKTUBE Manuel utilisateur
PERFECTPRO
PERFECTPRO ROCKPRO Manuel utilisateur
PERFECTPRO
PERFECTPRO SLIM 2 Manuel utilisateur
