Perel CTH406 Manuel utilisateur
CTH406
V. 04 –18/06/2021 2 ©Velleman nv
CTH406
V. 04 –18/06/2021 3 ©Velleman nv
CTH406
V. 04 –18/06/2021 4 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that
disposal of the device after its lifecycle could harm the
environment. Do not dispose of the unit (or batteries) as
unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect
the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Perel! Please read the manual thoroughly
before bringing this device into service. If the device was damaged in
transit, do not install or use it and contact your dealer.
2. Safety Instructions
Read and understand this manual and all safety signs
before using this appliance.
Indoor use only.
Class 2 appliance.
Switch of micro-gap construction.
Risk of electroshock when opening the cover. Be very
careful during the installation: touching live wires can
cause life-threatening electroshocks.
CTH406
V. 04 –18/06/2021 5 ©Velleman nv
•This device can be used by children aged from 8 years and above,
and persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not
play with the device. Cleaning and user maintenance shall not be
made by children without supervision.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on the last
pages of this manual.
•Familiarise yourself with the functions of the device before actually
using it.
•All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
•Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
•Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
•Do not use outside the technical specifications.
•Keep this manual for future reference.
4. Overview
Refer to the illustrations on page 2 of this manual.
Thermostat
on-off
S
temp sensitivity
holiday mode
time setting
comfort mode
P
program setting
eco mode
confirm
temp setting
previous/next
CTH406
V. 04 –18/06/2021 6 ©Velleman nv
Display
1
low bat indicator
5
holiday mode
2
24 hour bars
6
cooling
3
comfort mode
7
manual override
4
eco mode
8
heating
5. Installation
5.1 Battery Installation
WARNING
Do not puncture batteries or throw them in
fire as they may explode. Do not attempt to
recharge non-rechargeable batteries
(alkaline). Dispose of batteries in accordance
with local regulations. Keep batteries away
from children.
1. Remove the front cover using an appropriate screwdriver.
2. Insert two LR6/AA batteries according to the polarity markings.
3. Replace both batteries with new ones as soon as the low bat
indicator is displayed.
4. Proceed with installing the thermostat.
5.2 Thermostat Installation
WARNING
Make sure to cut off the mains power supply
before installing the thermostat.
1. Choose your installation spot. Install the thermostat in a well-
ventilated place and about 1.5 m (5 feet) above the floor, away
from direct sunlight, heat and interference sources.
2. Mount the thermostat on a flat surface. Drill two 6 mm holes and
insert a nylon anchor plug in each hole. Drill two 2.6 mm holes
when mounting the thermostat on a wooden surface.
3. Wire the thermostat. The thermostat is designed for maximum
230 V~, 6 A. Never exceed these limits!
Use wires with diameter of 1.0-2.5 mm² and connect
accordingly.
Refer to the illustrations on page 3 of this manual.
CTH406
V. 04 –18/06/2021 7 ©Velleman nv
6. Operation
6.1 Setting Time and Day
The thermostat automatically enters the time setting mode after the
batteries have been inserted. To set the time and day:
1. Set the hour with or . Confirm with .
2. Similarly, set the minutes and day.
3. Press to confirm and to return to the normal display.
6.2 Resetting
Press the RESET button located above the battery compartment to
reset all settings.
6.3 Switching the Thermostat On/Off
Press to switch the thermostat on or off.
In the off position, only the room temperature is displayed.
In the on position, the display can look like these:
a
eco mode
c
override mode
b
programmed temp
d
comfort mode
CTH406
V. 04 –18/06/2021 8 ©Velleman nv
6.4 Setting a Program
1. Press Pto enter the programming mode.
2. Set the day with or . Confirm with P.
3. Select the hour with or . Set the comfort ( ) or eco ( )
mode for every hour of the selected day.
4. Press to select the next day. Repeat steps 1 to 3 to set the
program.
5. Press to confirm and to return to the normal display.
6.5 Setting the Temperature
1. Press to enter the temperature setting mode.
2. Select the comfort ( ) or eco ( ) mode.
3. Set the temperature with or .
4. Press to confirm and to return to the normal display.
6.6 Setting the Temperature Sensitivity
According to your needs, adjust the temperature sensitivity range.
1. Press Sto enter the sensitivity setting mode.
2. Set the sensitivity with or , from S0.2 to S1.6.
3. Press to confirm and to return to the normal display.
Example: The temperature is set at 26 °C, and the sensitivity is
S0.6. The connected heating appliance will switch on as soon as the
ambient temperature drops below 25.4 °C. Otherwise, it will be on
stand-by.
6.7 Manual Override
You can always override the set program by pressing the desired
mode or by setting the desired temperature. Confirm with . The
manual override symbol will be displayed.
In override mode, only , , and will function.
Cancel the override setting by pressing .
6.8 Holiday Mode
The holiday mode allows temperature control during your absence.
1. In normal display mode, keep pressed for two seconds.
2. Set the temperature with or . Confirm with .
CTH406
V. 04 –18/06/2021 9 ©Velleman nv
3. Press or to select the comfort or eco mode.
4. Press to confirm and to return to the normal display.
6.9 HEAT/COOL Jumper Switch
The HEAT/COOL jumper is located on the circuit board. Remove the
batteries before switching.
HEAT: the thermostat runs in heating mode.
COOL: the thermostat runs in cooling mode.
7. Cleaning and Maintenance
There are no user-serviceable parts inside the device. Refer to an
authorized dealer for service and/or spare parts.
Occasionally wipe with a damp cloth to keep it looking new. Do not
use harsh chemicals, cleaning solvents or strong detergents.
8. Technical Specifications
temperature range.......................................... 5 °C - 30 °C
rated power ................ 230 V~, 50 Hz, 6(2) A, max. 1380 W
power supply........................................... 2 x AA/LR6 1.5 V
size..............................................................125 x 90 mm
weight.....................................................................150 g
options
high-energy alkaline batteries............................... LR6
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.velleman.eu. The information in
this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
CTH406
V. 04 –18/06/2021 10 ©Velleman nv
HANDLEIDING
1. Inleiding
Aan alle ingezetenen van de Europese Unie
Belangrijke milieu-informatie betreffende dit product
Dit symbool op het toestel of de verpakking geeft aan dat, als het na
zijn levenscyclus wordt weggeworpen, dit toestel schade
kan toebrengen aan het milieu. Gooi dit toestel (en
eventuele batterijen) niet bij het gewone huishoudelijke
afval; het moet bij een gespecialiseerd bedrijf
terechtkomen voor recyclage. U moet dit toestel naar uw
verdeler of naar een lokaal recyclagepunt brengen. Respecteer de
plaatselijke milieuwetgeving.
Hebt u vragen, contacteer dan de plaatselijke autoriteiten
betreffende de verwijdering.
Bedankt voor uw aankoop! Lees deze handleiding grondig voor u het
toestel in gebruik neemt. Werd het toestel beschadigd tijdens het
transport, installeer het dan niet en raadpleeg uw dealer.
2. Veiligheidsvoorschriften
Lees en begrijp deze handleiding en de
veiligheidsinstructies vóór ingebruikname.
Uitsluitend voor gebruik binnenshuis.
Dit toestel behoort tot klasse II.
Schakelapparaten met relais met microcontactopening.
Elektrocutiegevaar bij het openen van het toestel. Wees
voorzichtig bij de installatie: raak geen kabels aan die
onder stroom staan, om dodelijke elektroshocks te
vermijden.
Table des matières
Langues :
Autres manuels Perel Thermostat
Manuels Thermostat populaires d'autres marques
EWELLY
EWELLY EW-181 Manuel utilisateur
Prolon
Prolon T1100 Instructions d'installation
Computherm
Computherm Q20 Manuel utilisateur
Heatmiser
Heatmiser neoStat Manuel utilisateur
Aube Technologies
Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur
Mars
Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur
