Paxar Pizza Hut TC941XPHSG Guide de l'utilisateur

Caution

Do not touch the electrical connectors while setting up the printer. Electrostatic discharge can damage or

destroy the printhead or electronic components.

ALWAYS PLUG THE PRINTER INTO THE ELECTRICAL WALL OUTLET FIRST AND THEN TURN ON

THE PRINTER – NEVER TURN ON THE PRINTER AND THEN PLUG IT INTO THE WALL OUTLET.

*Setting Up the System

Follow these instructions to setup the printer,

keypad/terminal, and power supply in the tray.

1. Remove the tray and check inside the packaging for the

adhesive feet. Remove the feet from their adhesive

backing and apply one to each corner.

2. Place the tray on the cut table near an electrical outlet.

Tray design may vary from the one shown.

3. Make sure the power is off on both the printer and the

keypad/terminal before setting up any cables.

4. Facing the front of the tray, lay the serial cable (part

number 125802) behind the tray.

5. Plug the three-hole end of the printer’s power

supply cable into the three-pronged outlet in the

printer’s power supply.

6. Place the printer’s power supply behind the tray

with the printer’s connector on the right side.

7. Place the keypad/terminal’s power supply into the

tray under the shelf with the three-pronged end

facing the cut-out in the back of the tray.

8. Through the back of the tray, plug the three-hole

end of the keypad/terminal’s cable into the three-

pronged outlet in the keypad/terminal’s power

supply (18-24V).

9. Lay the keypad/terminal’s cable with the L-shaped

connector on the shelf.

10. Place the keypad/terminal on the shelf, but do not

remove the tape from the Velcroat this point.

Adhesive Feet

L-shaped connector

To printer

To keypad/terminal

Power cable Printer’s Power Power Cable

to Printer Supply to wall outlet

Keypad/Terminal’s

Power Supply

Warning

The printer and power supply should never be operated in a location where either one can get wet.

Personal injury could result.

The keypad/terminal should not be operated in a location that has room temperatures above 158°F or

below -4°F for extended periods of time. This could permanently damage the display.

Make sure the printer’s power supply is not accidentally connected to the keypad/terminal.

11. Plug the L-shaped connector into the socket located

on the top of the keypad/terminal (12V).

12. Connect the serial cable to the top of the keypad/terminal.

13. Place the printer in the tray.

The printer should never be operated while

resting on its side or upside down.

14. Plug the printer’s power supply cable (with the straight end)

into the socket on the back of the printer.

15. Connect the serial cable to the printer’s serial port.

16. If necessary, adjust the cables. Make sure all the cables

move freely through the openings in the back of the tray.

Use a cable tie to secure them.

17. Lift up the keypad/terminal with one hand

and feed the scanner cable connector

through the notch as shown.

18. Plug the scanner cable connector into the

socket and then turn the connector to lock

the cable in place.

19. Remove the tape from the Velcroon the keypad/terminal and put the keypad/terminal onto the shelf.

20. Plug the printer's power supply cable into a GROUNDED electrical outlet.

21. Press the power switch on the back of the printer to the ON position (I) to turn on the printer.

22. Plug the keypad/terminal's power cable into a GROUNDED electrical outlet.

For future upgrades, an extra cable (part number 125801) is provided to connect your keypad/terminal

to a PC.

IF YOU NEED HELP, PLEASE CALL 1-888-666-9414.

IF YOU NEED MORE PAPER LABELS, CALL ONE OF THE FOLLOWING:

PrimeSource: 800-397-4737 (order item #85221)

Wasserstrom: 800-999-9277 (order item #374014)

Unified Food Co-Op: 800-444-4144 (order item #374014)

Serial Cable Power Cable

L-shaped

Connector

Serial

Cable

Scanner

Cable

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Paxar Imprimante

Paxar

Paxar Monarch 9412 Manuel utilisateur

Paxar

Paxar 9416 Manuel utilisateur

Paxar

Paxar 9640 Manuel de service

Paxar

Paxar Monarch 9855 Manuel de service

Paxar

Paxar Monarch 9855 Manuel de service

Paxar

Paxar Monarch Sierra Sport 2 9460 Manuel de service

Paxar

Paxar Monarch 6015 Manuel d'utilisation et d'entretien

Paxar

Paxar Pizza Hut TC941XQR Manuel utilisateur

Paxar

Paxar TC6021OH Manuel de service

Paxar

Paxar Monarch 9416 XL Manuel utilisateur

Paxar

Paxar Monarch HandiPrint 6017 Manuel utilisateur

Paxar

Paxar 545 Manuel utilisateur

Paxar

Paxar Monarch 6015 Manuel utilisateur

Paxar

Paxar Monarch TCMPCL2PR Manuel utilisateur

Paxar

Paxar Gold 6037EX Manuel d'utilisation et d'entretien

Paxar

Paxar Monarch DOS-based PATHFINDER Ultra System... Manuel utilisateur

Paxar

Paxar Monarch Renegade 4 Manuel de service

Paxar

Paxar 9800 Series Manuel de service

Paxar

Paxar Monarch Sierra Sport 3R 9430R Manuel utilisateur

Paxar

Paxar J640 Manuel utilisateur

Paxar

Paxar 9416 Document technique

Paxar

Paxar Monarch HandiPrint 6017 Manuel utilisateur

Paxar

Paxar Monarch 9855 RFID Manuel utilisateur

Paxar

Paxar Monarch Pathfinder Ultra Gold Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur