Patton electronics 2156 Manuel utilisateur

AN extension doesn’t have to be expen-

sive or difficult. Patton’s Model 2156 and

Model 2157 Series of auto-rate Ethernet

Extenders open the door to low-cost and easy

set-up LAN extension. The LAN Extenders are

easy to use and take advantage of existing

copper twisted-pair infrastructure to connect

LANs at high speed and over long distances.

The Model 2156 can connect at speeds up to

2.3 Mbps with distances ranging from 5.3 to

9.4 km (3.3 to 5.8 miles) on standard 0.5 mm

(24 AWG) voice-grade twisted pair. The

Model 2157 can connect at speeds up to 4.6

Mbps over distances ranging from 3.3 to 9.4

km (2.1 to 5.8 miles) on standard 0.5 mm

(24 AWG) voice-grade twisted pair.

Whether connecting corporate LANs or

remote offices, Patton Ethernet Extenders

offer the best combination of speed and dis-

tance in the industry. Other LAN extenders

operate at a single rate or are difficult to con-

figure for LANs located at different distances,

but the CopperLink Ethernet Extenders’ auto-

rate adaptation feature ensures that users get

the highest speed possible for the distances

they are trying to reach. Patton Ethernet

Extenders come with a built-in MDI-X switch,

which simplifies connection to LANs or PCs

since it works correctly with a straight-

through cable or a cross-over cable. Set-up is

easy, just connect the Ethernet port cable and

the copper twisted-pair to the Extenders, then

apply power! Patton CopperLink Auto-rate

Ethernet Extenders are the perfect fit for cost-

effective simple and efficient LAN extension!

Visit www.patton.com for more information.

Reach your remote LAN with Patton’s Auto-Rate Ethernet Extenders and get the best speed/distance combination in

the industry using just a single twisted-pair.

CopperLink™

Ethernet Extender

Patton Models 2156 & 2157

Extenders

High Speed Extension

With the Model 2157 you get speeds up to 4.6

Mbps, while the Model 2156 delivers speeds up

to 2.3 Mbps

CopperLink 2-Wire Connection

Easy 2-wire CopperLink connection via built-in

RJ-11 port

Auto-sensing Ethernet

Auto 10 or 100Base-T and full or

half-duplex Ethernet operational

Auto-rate Selection

Just plug the units in, and they will determine the

maximum rate possible for the connection

Transparent LAN Bridging

Passes higher layer protocols and

supports 802.1Q VLAN tagging

Automatic Learning, Aging, and

Filtering

Only allows packets with addresses outside

the LAN to be forwarded

Auto-sensing 10

or 100Base-T,

and full or half-duplex

Front panel indicators

show operational

status at a glance

AC or DC

power options

Only a single twisted

pair needed for speeds

up to 4.6 Mbps

Proven

Patton design

Built-in MDI-X

cross-over switch

Patton Model 2157

7622 Rickenbacker Drive

Gaithersburg, MD 20879 USA

Phone +1-301-975-1000

Fax +1-301-869-9293

E-mail [email protected]

Web www.patton.com

07M2157-2156-DS2

Meriedweg 7

CH-3172 Niederwangen

Phone +41 (31) 985 25 25

Fax +41 (31) 985 25 26

E-mail [email protected]

Web www.inalp.com

Patton is a registered trademark, and is a trademark of Patton Electronics Company

in the United States and other countries.

Specifications

Competitive Positioning

CopperLink Line Interface

RJ-45 (pin 4 = ring; pin 5 = tip)

Ethernet Interface

8-position shielded RJ-45. Auto-sensing 10/100Base-T

with half or full-duplex operation. DIP switch capable of

disabling 100-Mbps full-duplex for equipment that does

not support 802.3X (Pause Packets)

Protocol

Transparent to high layer protocol. Supports 802.1Q

VLAN tagging

Modulation

(Quadrature Amplitude Modulation) QAM 4-band

Duplexing Method

FDD (Frequency Division Duplexing)

Frequency Range

CopperLink: 0–12 MHz

Transmission

CopperLink line rate: Up to 50 Mbps

Surge Suppression

CopperLink line maximum current surge: 20kA (8/20µs)

gas tube

Front Panel Indicators

Power, Link, Ethernet

Dimensions

1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)

Weight

0.4 lbs (0.18 kg) without power supply

Power

External AC and DC options: 120VAC, and universal

input (UI)—100–240 VAC, or optional -48 VDC, -24

VDC, or -12 VDC

Environment

Temperature: 32–122°F ( 0–50°C)

Humidity: Up to 90% non-condensing

Compliance

FCC Part 15A, CE Mark, EMC Directive 89/336/EEC,

Low-Voltage Directive 73/23/EEC

Patton’s CopperLink Auto-Rate Ethernet Extenders

are the perfect fit for simple, cost-effective high

speed Ethernet Extension. They allow customers to

take advantage of the existing copper infrastructure

to connect remote LAN’s across distances and at

speeds previously unthought-of. The auto-rate fea-

ture ensures the highest speed is achieved on each

connection, and the plug-n-play operation ensures

they are up and running in seconds. Add in the

auto-sensing full/half duplex 10/100Base-T

Ethernet port and the integrated crossover switch

to make setup even easier, and the value of these

Ethernet Extenders can’t be beat!

• Auto-Rate Feature

The advanced auto-rate algorithm automatically

determines the best possible rate for each connec

tion and sets up each extender without any need for

user interface.

• Plug-and-Play

Just unpack the extenders, plug them into each end

of the extension, power them up, and they are up

and running. It doesn’t get any easier!

• High Speed/Long Reach

These Ethernet Extenders provide the best combi-

nation of speed and distance seen anywhere in the

industry !

The Auto-rate feature ensures

that the best combination of

speed and distance is achieved

for each LAN extension

Twisted Pair

Model 2157

Twisted

Pair

Application Example—Corporate Campus LAN Extension

Autres manuels pour 2156

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Patton electronics Extenseur

Patton electronics

Patton electronics COPPER LINK 2174 Manuel utilisateur

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2160 Series Manuel utilisateur

Patton electronics

Patton electronics Industrial Ethernet Extender with LCD Interface... Mode d’emploi

Patton electronics

Patton electronics EnviroNET 2100 Series Manuel utilisateur

Patton electronics

Patton electronics EnviroNET EHA2168 Manuel utilisateur

Patton electronics

Patton electronics CopperLINK 2173 Manuel utilisateur

Patton electronics

Patton electronics CopperLink Ethernet Extenders 2158A Manuel utilisateur

Patton electronics

Patton electronics 2100 Series Manuel utilisateur

Patton electronics

Patton electronics 1173R Manuel utilisateur

Patton electronics

Patton electronics EnviroNET EHA2172 Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2155 Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2160 Series Manuel utilisateur

Patton electronics

Patton electronics SmartNode 2294 Manuel utilisateur

Patton electronics

Patton electronics 2156 Manuel utilisateur

Patton electronics

Patton electronics 2156 Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2156 Manuel utilisateur

Patton electronics

Patton electronics SmartNode 2290 Series Manuel utilisateur

Patton electronics

Patton electronics COPPERLINK 2150 Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2158 Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2160 Series Manuel utilisateur

Patton electronics

Patton electronics SmartNode 2292 Manuel utilisateur

Patton electronics

Patton electronics 2113 Manuel utilisateur

Patton electronics

Patton electronics CopperLink 2168 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur