Panasonic CT-27XF36C Manuel utilisateur

SuperFlatTM System Monitor-Receiver

Operating Instructions

Téléviseur-moniteuravec systèmSuperFlatMD

Manueld’utilisation

CT-27XF36C

CT-32XF36C

CT-36XF36C

PRINTED IN USA

TQB2AA0323 90416

CT-27XF36C

CT-32XF36C

CT-36XF36C

0323 cover.fm Page 1 Thursday, March 29, 2001 11:03 AM

Panasonic Canada Inc.

5770 Ambler Drive

Mississauga, Ontario

Canada L4W 2T3

Tél.: (905) 624-5010

www.panasonic.ca

WARNING:To reduce the risk of electric shock do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within a

triangle is intended to tell the

user that important operating

and servicing instructions are in

the papers with the appliance.

The lightning flash with arrow

head within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to persons.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

WARNING:To prevent fire or shock hazard, do not expose this appliance

to rain or moisture.

Certain audio features of this product manufacture under a license from Desper Products, Inc.

Spatializer® and the circle-in-square device and trademarks owned by Desper Products, Inc.

Spatializer U.S. Patents are: 4,308,423; 4,355,203 and 5,412,731.

TABLEOFCONTENTS

Table of Contents

Congratulations ........................................................2

Customer Record.....................................................................2

Care and Cleaning ...................................................................2

Specifications...........................................................................2

Installation.................................................................3

Television Location...................................................................3

Optional Cable Connections.....................................................3

AC Power Supply Cord ............................................................3

Cable/Antenna Connection ......................................................3

Optional Equipment Connections.............................................4

Additional Equipment Connections ..........................................7

Amplifier (To Audio Amp) Connection......................................7

Program Out (Prog Out Connection.........................................7

Home Theater Connection.......................................................8

Picture In Picture (PIP) Operation...........................9

Basic PIP Operation.................................................................9

PIP Operation with a Cable Box...............................................9

Roller Guide Menu™..............................................10

Basic Navigation.....................................................................10

Remote Control Guide............................................................10

Roller Guide Feature Chart....................................11

Special Features.....................................................14

Menu Languages....................................................................14

Prog Chan (Program Channels).............................................14

Closed Captioning..................................................................15

Sleep Timer............................................................................16

Timer 1 and Timer 2...............................................................16

Picture Adjustments ...............................................................17

Dolby Center Mode & Fixed Audio Out..................................17

Favorite Channels and Captions............................................18

Lock........................................................................................19

Troubleshooting Chart ...........................................20

Read these instructions completely before operating TV.

Contents are subject to change without notice or obligation.

Unauthorized copying and distribution is a violation of law.

CONGRATULATIONS

Congratulations

Your new television has state-of-the-art picture quality and an innovative Dome sound system.

It has a compact elegant styling designed to give you many years of enjoyment. It was

thoroughly tested and tuned at the factory for best performance.

Customer Record

The model and serial number of this product are located on the back of the television. You

should note the model and serial number in the space provided and retain as a permanent

record of your purchase. This will aid in identification in the event of theft or loss.

Model

Number

Serial

Number

Care and Cleaning

Screen (Turn TV Off)

•Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE

ABRASIVE CLEANERS.

•Avoid excessive moisture and wipe dry.

Cabinet and Remote Control

rFor cabinets and remote control, use a soft cloth dampened with water or a mild detergent

solution. Avoid excessive moisture and wipe dry.

rDo not use benzene, thinner or other petroleum based products.

Specifications

Specifications are subject to change without notice or obligation.

Power Source

CT-27XF36C

CT-32XF36C

CT-36XF36C 120V AC, 60Hz

Channel Capability - 181 VHF-12; UHF-56; Cable-125

4 Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type

8 Audio Input Jacks 500mV RMS 47K Ohm

Video Output Jack 1Vp-p, 75 Ohm, Phono Jack Type

2 Audio Output Jacks 0-2.0V RMS 4.7K Ohm

2 S-Video Input Jacks S-Video (Y-C) Connector

INSTALLATION

Installation

Television Location

This unit can be used as part of an entertainment center. Consult your dealer for available

options.

rAvoid excessive sunlight or bright lights, including reflections.

rKeep away from excessive heat or moisture. Inadequate ventilation may cause internal

component failure.

rFluorescent lighting may reduce remote control transmitting range.

rKeep away from magnetic equipment, including motors, fans and external speakers.

Optional Cable Connections

Shielded audio and video cables should be used between components. For best results:

rUse 75-ohm coaxial shielded cables.

rUse appropriate input and output connectors that match your component connectors.

rAvoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT

USE A PLUG WITH A RECEPTACLE OR OTHER OUTLET UNLESS THE

BLADE CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

FOR SOME MODELS THAT ARE NON-POLARIZED, THE USE OF AN AC

ADAPTOR CONNECTOR MAY BE NECESSARY.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection is required.

Cable Connection

Connect the cable supplied by your local cablecompany to ANT1

connection on back of television. Select cable mode and ANT1 in SET UP

menu under Prog Chan (Program Channels).

Note: A cable converter box may be required for proper reception. Check with

your local cable company for compatibility requirements.

Antenna Connection

•For proper reception of VHF/UHF channels, an external

antenna is required. For best reception, an outdoor

antenna is recommended.

•Connect home antenna to ANT1 connection on back of

television. Select TV mode and ANT1 in the SET UP menu

under Prog Chan.

Polarized plug

Cable Preset

Cable Mode is preset at the factory.

Antenna users must change to TV mode and

ANT1 in the Set Up Menu under Prog Chan.

75 Ohm VHF/UHF

on back of TV

Incoming Cable from

Cable Company

Incoming Cable from

Home Antenna

INSTALLATION

Optional Equipment Connections

VCR Connection

Follow this diagram when connecting your television to a VCR only.

Note: The remote control must be programmed with supplied codes to operate the VCR. See

Programming the Remote Control in the Remote Control Quick Reference Guide.

Viewing a television program

Procedure

1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to the television program you want to view.

Viewing a video

Procedure

rOption A

1. Select ANT1 in the SET UP menu under Prog Chan.

2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,

VIDEO 2, etc.) connected to your VCR.

3. Begin the video.

rOption B

1. Select ANT2 in the SET UP menu under Prog Chan.

2. Tune the television to Channel 3 or 4, depending on your VCR.

3. Begin the video.

Recording a television program

Procedure

rOption A (Recording and viewing the same program)

1. Select ANT2 in the SET UP menu under Prog Chan.

2. Tune the television to Channel 3 or 4, depending on your VCR.

3. Using the VCR, tune to the television program you want to record.

4. Begin recording.

rOption B (Recording one program while viewing another program)

1. Select ANT1 in the SET UP menu under Prog Chan.

2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,

VIDEO 2, etc.) connected to your VCR.

3. Using the VCR, tune to the television program you want to record.

4. Begin recording.

5. Press the TV/VIDEO button on the remote control to switch back to TV mode.

6. Tune the television to the television program you want to view.

ANT 1 SPLIT OUT ANT 2

AUDIO

VIDEO S-VIDEO

INPUT 1

INPUT 2

INPUT 3

AUDIO

AMP

CENTER CHANNEL

INPUT

PROG OUT

CONNECTIONS ON BACK OF TV

AUDIO OUT

VIDEO OUT

ANT INPUT

OUTPUT

S-VIDEO OUT

VCR

CABLES NOT SUPPLIED

Incoming Cable

Use either the

S-Video or Video

connection.

INSTALLATION

Cable Box Connection

Follow this diagram when connecting your television to a cable box only.

Note: The remote control must be programmed with supplied codes to operate the cable

box. See Programming the Remote Control in the Remote Control Quick Reference

Guide.

Viewing a premium (scrambled) cable channel

Procedure

1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to Channel 3.

3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.

Note: To use special features such as Favorite Channels and Channel Captions (see

Special Features section for more information), ANT1 must be selected in the SET UP

menu under Prog Chan.

ANT INPUT

ANT OUTPUT

CABLE BOX

ANT 1 SPLIT OUT ANT 2

AUDIO

VIDEO S-VIDEO

INPUT 1

INPUT 2

INPUT 3

AUDIO

AMP

CENTER CHANNEL

INPUT

PROG OUT

CONNECTIONS ON BACK OF TV

CABLES NOT SUPPLIED

Incoming Cable

INSTALLATIONVCR and Cable Box Connection

Follow this diagram when connecting your television to both a VCR and a cable box.

Note: The remote control must be programmed with supplied codes to operate the VCR and

the cable box. See Programming the Remote Control in the Remote Control Quick

Reference Guide.

Viewing a premium (scrambled) cable channel

Procedure

1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).

2. Tune the television to Channel 3.

3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.

Note: To use special features such as Favorite Channels and Channel Captions (see

Special Features section for more information), ANT1 must be selected in the SET UP

menu under Prog Chan.

Recording a premium (scrambled) cable channel

Procedure

1. Select ANT2 in the SET UP menu under Prog Chan.

2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,

VIDEO 2, etc.) connected to your VCR.

3. Turn the VCR ON.

4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.

5. Using your cable box, tune to the premium (scrambled) cable channel you want to

record.

6. Begin recording.

Note: To view a different channel while recording:

•Select ANT1 in the SET UP menu under Prog Chan.

•Press the TV/VIDEO button on the remote control to TV mode.

•Tune the television to a television program (except another premium (scrambled)

cable channel).

AUDIO OUT

VIDEO OUT

S-VIDEO OUT

VCR

Incoming Cable

CABLES NOT SUPPLIED

CONNECTIONS ON BACK OF TV

ANT 1 SPLIT OUT ANT 2

AUDIO

VIDEO S-VIDEO

INPUT 1

INPUT 2

INPUT 3

AUDIO

AMP

CENTER CHANNEL

INPUT

PROG OUT

Use either the

S-Video or Video

connection.

CABLE BOX

ANT INPUT

OUTPUT

ANT INPUT

ANT OUTPUT

INSTALLATION

Additional Equipment Connections

Push to open the front panel of the television to use the Audio/Video input jacks for optional

equipment. Press the TV/VIDEO button to select VIDEO 4 input mode.

A second VCR, a video disc player, video game equipment and DSS equipment can also be

connected to the video inputs. See the optional equipmentmanual for details.

Procedure

1. Connect equipment to rear or front Audio/Video input jacks.

2. Select the corresponding video input by pressing TV/VIDEO button.

3. Operate optional equipment as instructed in equipment manual.

Note: The S-VIDEO connection provides higher quality picture. It overrides other

VIDEO connections. Use INPUT 1, AUDIO R and L with S-VIDEO

connection.

Amplifier Connection (TO AUDIO AMP)

To listen through a separate stereo system, connect an external audio amplifier TO AUDIO

AMP connections on back of television.

Note: TO AUDIO AMP connections cannot be connected directly to

externalspeakers.

Audio Adjustments

1. Select SPEAKERS ON located in the onscreen AUDIO menu .

2. Set amplifier volume to minimum.

3. Adjust television volume to desired level.

4. Adjust amplifier volume to match the television.

5. Select SPEAKERS OFF & Variable Audio Out from AUDIO menu.

6. Volume, mute, bass, treble and balance are now controlled through the television.

Note: Select SPEAKERS OFF & Fixed Audio Out to control audio functions through

the external amplifier.

Program Out Connection (PROG OUT)

To use the television audio and video with optional equipment, connect the PROG OUT and TO

AUDIO AMP connections on the back of the television.

Procedure

1. Connect optional equipment to PROG OUT and TO AUDIO AMP terminals.

2. PROG OUT terminal display is the same as on screen display.

3. See optional equipment manual for futher instructions for recording and monitoring.

VIDEO L- AUDIO -R

INPUT 4

CONNECTIONS ON FRONT OF TV

INSTALLATION

Home Theater Connection

Your television’s internal speakers can be connected as the center channel of a surround sound

home theater system. Connect a surround sound amplifier (center channel speaker output) to

CENTER CHANNEL INPUT on the back of the television, as shown. DOLBY* CENTER MODE &

FIXED AUDIO OUT must be selected in the AUDIO Roller Guide Menu™** under SPEAKERS.

CONNECTIONS ON BACK OF TV

(1) Push and hold

down button.

(2) Insert bare wire

into hole and

release button.

ANT 1 SPLIT OUT ANT 2

AUDIO

VIDEO S-VIDEO

INPUT 1

INPUT 2

INPUT 3

AUDIO

AMP

CENTER CHANNEL

INPUT

PROG OUT

Listener

TV Speakers

Center Channel

Right Front

Speaker

Left Front

Speaker

Left Rear

Surround Speaker Right Rear

Surround Speaker

Surround Amplifier

Video Component VCR

** U.S. Patent Pending

*Manufactured under license from Dolby Laboratories. “Dolby”, “AC-3”, “Pro Logic” and the double-D symbol are

trademarks of Dolby Laboratories.

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Panasonic TV

Panasonic

Panasonic TX-32C300B Manuel utilisateur

Panasonic

Panasonic CT-20SL15 - 20" CRT TV Manuel utilisateur

Panasonic

Panasonic TC-21S3MC Manuel utilisateur

Panasonic

Panasonic CT-13R14 Manuel utilisateur

Panasonic

Panasonic CT-1388YD Manuel utilisateur

Panasonic

Panasonic TX-32PG50 Manuel utilisateur

Panasonic

Panasonic Viera TC-55LE54 Manuel utilisateur

Panasonic

Panasonic TX-21FG50A Manuel utilisateur

Panasonic

Panasonic Viera TH-H37X8A Manuel utilisateur

Panasonic

Panasonic Viera TC-L42E60 Manuel utilisateur

Panasonic

Panasonic TC-25L2Z Manuel utilisateur

Panasonic

Panasonic TX-32DK20F Manuel utilisateur

Panasonic

Panasonic CT-27SL13MUG Manuel utilisateur

Panasonic

Panasonic CT-36D31 Manuel utilisateur

Panasonic

Panasonic TX-28SL20F Manuel utilisateur

Panasonic

Panasonic TX-14B3T Manuel utilisateur

Panasonic

Panasonic Viera TX-L32E30Y Manuel utilisateur

Panasonic

Panasonic TX-29P300K Manuel utilisateur

Panasonic

Panasonic CT-P31XF30 Manuel utilisateur

Panasonic

Panasonic Viera TX-32LZD81 Manuel utilisateur

Panasonic

Panasonic CT-20R13 Manuel utilisateur

Panasonic

Panasonic TX-28LB1C Manuel utilisateur

Panasonic

Panasonic TC-29A11Z Manuel utilisateur

Panasonic

Panasonic TX-33AK10 Manuel utilisateur

Manuels TV populaires d'autres marques

Philips

Philips Colour Television Manuel utilisateur

Toshiba

Toshiba 27A10 Manuel utilisateur

Philips

Philips 42PF9630A/37 Manuel utilisateur

Hitachi

Hitachi 32FX48B Manuel utilisateur

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Manuel utilisateur

Changhong Electric

Changhong Electric uhd55b6000is Manuel utilisateur

Philips

Philips Matchline 21CE7551 Manuel utilisateur

Toshiba

Toshiba 19A20 Manuel utilisateur

Philips

Philips 25PT4523-16 Manuel utilisateur

Sony

Sony XBR-100Z9D Manuel utilisateur

Philips

Philips PR0930X3 Manuel utilisateur

Philips

Philips Brilliance 231P4QPY Manuel utilisateur

Samsung

Samsung 55S9 B Series Manuel utilisateur

Philips

Philips 32HF9385D Guide de dépannage

Sharp

Sharp LC-40FI5012E Manuel utilisateur

Loewe

Loewe Table Stand Reference 55 Manuel utilisateur

Philips

Philips 32PFH5300 Manuel utilisateur

Sylvania

Sylvania 6427FB Manuel utilisateur